Learn to create tube drawings with appropriate dimensioning, a bill of materials, and multiple orthographic views and projections. Create a tube drawing from an existing part. Add additional views and a bill of materials to the drawing. Create centerlines and driven dimensions on the additional views of the part.
Lesson
1 year ago
ENG
JPN
Connect existing components using orthogonal tubes and standard fittings from the library. Use the Auto Route feature to automatically generate routes Add standard fittings to assemblies. Create orthogonal routes between features.
Lesson
1 year ago
ENG
JPN
Create flexible tubing routes between existing components in an assembly. Edit tubing routes to accomodate tubing clips and cylindrical envelopes. Use the Repair Route command and the Re-route Spline option to resolve any errors. Create flexible tube routes. Edit routes using tubing clips and envelopes.
Lesson
1 year ago
ENG
JPN
Create piping drawings with orthographic views, bills of materials, detailed views, and annotations by using the piping drawing and standard drawing tools. Add annotations and dimensions to drawings. Create piping drawings. Add bill of materials to drawing.
Lesson
1 year ago
ENG
JPN
Edit a pipe route relative to the pipe\'s geometry (either centerline or external surface). Coverings can also be added to pipes. Create a route relative to an existing surface. Add coverings to pipes. Change where dimensions are assigned relative to the pipe (centerline or external surface).
Lesson
1 year ago
ENG
JPN
Use the Split Route tool to add junction points to existing routes. Create geometry at the J-point to orient an in-line fitting. Use the Split Route tool to add a junction point to an existing route. Create 3D geometry at a junction point. Use 3D geometry to orient an in-line fitting.
Lesson
1 year ago
ENG
JPN
Insert a reducing outlet tee into an existing route and orient it using keyboard shortcuts and a triad. Use the Auto Route tool to connect the pipes resulting from the additional feature. Add in-line fittings to existing routes. Use keyboard shortcuts and the triad to orient and position an in-line fitting.
Lesson
1 year ago
ENG
JPN
Manually create a 3D-sketched route using angled guides, lines, elbows, and the merge command for a case where Auto Route is ineffective. Use angled guides, lines, elbows, and the merge command to create a 3D sketch. Use a 3D sketch to manually create a route.
Lesson
1 year ago
ENG
JPN
Create a pipe coupling using the Routing Component Wizard. Create a fitting with the Routing Component Wizard. Select and create C-points and R-points. Use design tables to configure fittings. Save created fittings to the Design Library.
Lesson
1 year ago
ENG
JPN
Create and use a custom route specification template using the Routing Library Manager. Specify size and schedule of pipe segments. Select pipes and elbows from the Piping and Tubing Database. Insert route components with route specification templates.
Lesson
1 year ago
ENG
JPN
Create, edit and save custom routing assembly templates using an existing routing assembly template. Create and save a custom routing assembly template. Specify different drafting standards, units, and other document properties as the defaults that will be used when you create a new route with the custom template.
Lesson
1 year ago
ENG
JPN
SustainabilityXpress estimates a models carbon footprint, energy consumed during its lifecycle, Air acidification, and water eutrophication. Information is analyzed such as the material used, maufcturing process, manufacturing region, use region, and end of life. Explore how different materials and manufacturing processes affect the environmental impact for a design Specify product use information to determine values for transportation and end of life. Understand the information displayed in the Environmental Impact charts. Learn how to set an environmental impact baseline to compare changes to. Generate a report of the Sustainability output.
Lesson
1 year ago
ENG
JPN
Verify that a model is symmetric. This is helpful for splitting a part into the smallest symmetrical body for simulation analysis. Evaluate a model for symmetry. Understand the options and results within the Symmetry Check tool. Split a part into the smallest symmetrical body for use in simulation analysis.
Lesson
1 year ago
ENG
JPN
Search for, manage and view exisiting reports created by SolidWorks Utilities. Export reports to a briefcase or delete reports. Search for, manage, and view SolidWorks Utilities reports. Export and delete reports.
Lesson
1 year ago
ENG
JPN
Select features or elements of a particular type so that they may be acted upon in one operation. Operations include appearance changes, suppression changes, and more. Bulk-select by feature type. Understand the options and search criteria of the Power Select tool.
Lesson
1 year ago
ENG
JPN
Check for sharp edges, sliver faces, discontinuous geometry and more. This affords you the opportunity to fix these issues before finalizing a design. Check a model for insignificant geometry, sliver faces, sharp edges, and discontinuous geometry. Specify search criteria.
Lesson
1 year ago
ENG
JPN
Specify, identify, and locate features based on selection criteria so you can modify all of the features, simplify the model by suppressing the features, and create a simplified configuration. Locate and identify features based on specified criteria. Modify selected features in one operation. Create a simplified configuration.
Lesson
1 year ago
ENG
JPN
Paste or \"paint\" the properties of an existing feature onto other features. The features may be in the same part or a another part. Copy and paste feature properties from one feature to another.
Lesson
1 year ago
ENG
JPN
Compare the geometry of two parts to find face and volumetric differences. It is particularly useful for comparisons to imported geometry. Find differences in the geometry of similar parts. Find differences in the volumes of similar parts.
Lesson
1 year ago
ENG
JPN
Compare the features of two parts and classify the differences into two categories: unique features that exist in only one part and modified features that exist in both parts. Find differences between the features of similar parts. Classify the features as unique or modified.
Lesson
1 year ago
ENG
JPN
Use a familiar find and replace tool to search and change the text for various types of annotations on a drawing sheet. Find and replace text in drawing annotations.
Lesson
1 year ago
ENG
JPN
Use this tool to find the differences between two bill of materials (BOM) tables. Differences include changes in quantity, part number, etc.. Find differences between similar BOMs. Set options of the Compare BOM tool. Interpret the output of the Compare BOM tool to identify the differences between BOMs.
Lesson
1 year ago
ENG
JPN
Create a side core with draft from sketches on molds with trapped molding areas. Use feature freeze bar to exclude features from being rebuilt. Create side cores on molds. Exclude features from being rebuilt.
Lesson
1 year ago
ENG
JPN
Use the Tooling Split command to create interlock surfaces around the perimeter of the parting surfaces to create mold tooling. Save mold bodies and create assemblies of molds. Create assembly files for mold from part files. Create exploded assembly view of mold. Create interlocking surfaces on molds using the tooling split command.
Lesson
1 year ago
ENG
JPN