Sketch and loft between two sketch profiles to create a sheet metal part. Understand the requirements for the sketch profiles and the loft feature. Sketch the profiles for a lofted sheet metal part. Understand the requirements for a lofted sheet metal part. Set the thickness and bend line options.
Lesson
6 months ago
ENG
JPN
When the internal cut features of a model are of most importance in a design, one approach is to create solid features that represent the negative space of a part. Once the negative space is complete, the Combine command can be used to subtract the volume from another solid body. Use solid geometry representing the interior space of a manifold to create the negative space of the part. Create a separate solid body surrounding the geometry as the main body of the manifold. Combine the solid bodies in the part using a subtract operation.
Lesson
6 months ago
ENG
JPN
Use several direct editing techniques for working with imported geometry using surfacing tools. Explore the Delete Face tool, the Delete Hole command, and the Untrim Surface tool. Use the Delete Face tool to remove an unwanted imported geometry feature. Use Delete Hole and Untrim Surface to remove an unwanted imported geometry feature. Convert a surface body into a solid body using the Thicken command.
Lesson
7 months ago
ENG
JPN
Locate and diagnose problems in geometry imported from other CAD software. Then, use surface tools to repair the damaged geometry. Diagnose problems in a model with verification on rebuild, import diagnostics, and check entity. Heal faulty faces using the import diagnostics tool. Delete faulty faces and use various surface tools to re-create the geometry. Display curvature and check the minimum radius of curvature. Delete and replace fillets to create smoother blends. Extend, trim, and knit surfaces.
Lesson
7 months ago
ENG
JPN
Use extruded, revolved, and swept surfaces to create geometry. Trim, extend, knit, and thicken the surfaces to finish the thin-walled model. Extrude a sketch to create a surface. Revolve a sketch about an axis to create a surface. Trim a surface using a sketch or another surface as the trim tool. Sweep an open profile along a path to create a surface. Combine multiple surfaces into a single body using knit surfaces. Thicken a surface body to create a solid body.
Lesson
7 months ago
ENG
JPN
Use surface tools to create complex blends at the intersections of surfaces. The tools used in this module include trim surfaces, lofted surfaces, and fill surfaces. Trim surfaces using a sketch as the trim entity. Create a blend between surfaces using a lofted surface. Fill an area that is completely bounded by surfaces using the fill surface tool.
Lesson
7 months ago
ENG
JPN
Create exploded views in multibody parts using some of the same tools that you use to create an exploded view in an assembly. Toggle between exploded and collapsed states. Edit the explode steps. Create more than one exploded view per configuration.
Lesson
7 months ago
ENG
JPN
When edges of a part are too close to allow for fillets to be created properly, often making use of separate solid bodies can help. Separate features into separate solid bodies. Apply fillets to the individual bodies. Use the Combine command to add the bodies back together. Apply an additional fillet to the part to complete the model.
Lesson
7 months ago
ENG
JPN
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
Lesson
7 months ago
ENG
JPN
Create a sketch driven pattern, table driven pattern, curve driven pattern, and a fill pattern. These patterns allow you to pattern features in non-linear or non-circular directions. Use sketch points to define a sketch driven pattern. Specify coordinates for a table driven pattern. Convert entities to create a sketch for a curve driven pattern. Distribute features within a boundary using a fill pattern.
Lesson
7 months ago
ENG
JPN
Diagnose and repair issues with sketches including extraneous geometry, dangling dimensions, and dangling relations. Diagnose problems in a part. Repair sketch geometry problems. Repair dangling relations and dimensions. Use the What\'s Wrong dialog. Edit the plane used by a sketch.
Lesson
7 months ago
ENG
JPN
Interrogate a part using rollback to understand how it was created. Change the sequence of features and edit features, sketches, and sketch planes. Roll forward through an existing part. Reorder a feature in the FeatureManager design tree. Understand parent/child relationships. Edit sketches and features.
Lesson
7 months ago
ENG
JPN
Contour selection options allow individual contours to be selected within a sketch. By making use of contour selection techniques, a single sketch can be used to produce multiple features. Use the Contour Select Tool to pre-select contours for a feature. Use the Selected Contours options for a feature to define areas of a sketch to use. Use a single sketch to generate multiple features. Understand the icons displayed when using selected contours and sharing sketches.
Lesson
7 months ago
ENG
JPN
Use design tables to quickly create many configurations that change the values of dimensions and the suppression states of features. Set up a model to effectively use design tables. Understand the options when creating a design table. Add columns to a design table for additional dimensions and features to control. Add rows to a design table for additional configurations to create.
Lesson
7 months ago
ENG
JPN
Create fillets and chamfers to modify geometry in a sketch. Set the size and options for the sketch fillets and sketch chamfers. Create fillets and chamfers in a sketch. Understand the options for creating sketch fillets and sketch chamfers.
Lesson
7 months ago
ENG
JPN
Create 3D sketches using the default coordinate system of the model to orient the sketch entities. Add relations and dimensions to constrain the size of the sketch entities. Use the on-screen feedback when sketching. Use planes to orient 3D sketch entities. Change the sketch plane by pressing the Tab key or by using a plane or planar face. Display multiple viewports to modify 3D sketch entities.
Lesson
1 year ago
ENG
JPN
Import parts into SOLIDWORKS, then use the rip feature to create thin cuts in sheet metal geometry between adjacent flanges. Insert bends to convert the model to a sheet metal part to flatten and further edit the part. Import other file types into SOLIDWORKS. Use rip feature to create thin cuts. Add bends to part to convert part to sheet metal.
Lesson
1 year ago
ENG
JPN
The Indent command will form an impression of a selected tool body in a selected target body of a part. By using the options within the Indent command, a simple cut, thickness, or clearance can be formed around the tool body region. Understand the options within the Indent command. Create an Indent feature to form faces of a part around selected tool bodies. Use the Delete Body command to remove tool bodies from the part.
Lesson
1 year ago
ENG
JPN
The Combine command makes use of separate solid bodies within a part. By using this tool, solid bodies volumes can be added together, subtracted, or produce a solid from the common volume between bodies. The Combine command makes use of separate solid bodies within a part. By using this tool, solid bodies volumes can be added together, subtracted, or produce a solid from the common volume between bodies. Use the Subtract option within the Combine tool to subtract one solid body from another. Use the Common option within the Combine tool to result in a solid produced from the intersection of solid bodies.
Lesson
1 year ago
ENG
JPN
Create 2D or 3D sketches where faces of a model intersect the sketch plane or each other. You can use the sketches to determine draft angles, evaluate curvature, as a sweep path, and more. Create 2D sketch entities where selected faces intersect the sketch plane. Create 3D sketch entities where selected faces intersect each other.
Lesson
1 year ago
ENG
JPN
Project a sketch onto another sketch to create a curve that represents the cage for a water bottle. Create sketches that represent the overall shape of the water bottle. Project one sketch onto another to create the 3D curve. Create a sweep feature using the 3D curve as the path.
Lesson
1 year ago
ENG
JPN
Create a variable radius fillet where you set the radius value at selected vertices and control points. Also, you can set the radius to zero to force the fillet to converge to a point. Create a fillet where the radius varies along the selected edge. Modify the radius value at vertices or control points. Create zero radius fillets where the fillet must converge to a point.
Lesson
1 year ago
ENG
JPN
Apply a setback fillet to vertices where three or more edges meet. Setback fillets can model cleaner looking blends at the vertices. Add setback values to vertices where three or more edges meet.
Lesson
1 year ago
ENG
JPN
Learn to use modeling techniques that allow for efficient transition between part design and delivery of the finished castings. Create a motorcycle gear case by designing the production tooling for the part. Start by designing the core, or the negative space, of the gear case. Design the pattern, or outside faces, of the gear case as a separate solid body. Save the tooling bodies as new part files. Combine the solid bodies, subtracting the core from the pattern. Apply machining features to finish the model.
Lesson
1 year ago
ENG
JPN