Fastener invisible edge when colliding with part I'm trying to figure out a relatively simple looking task. We have fasteners outside of a part that seem to merge with the part and not display and edge.
SOLIDWORKS Forums
2 分鐘 前
Ok, in my class we are following a book by Paul Tran. I had a question on why he chose to draw the part the way he did and my instructor and i seem to think it has something to do with machining the part. Here is a picture of the part with fully constrained dimensions.
SOLIDWORKS Forums
3 分鐘 前
Hello, Any ideas, other than making a Document template with predefined sheet metal form... I find the mentioned option to mess some shapes so bad that it would be best to disable it forever... but it seems to jump on on every new sheet metal model by default...
SOLIDWORKS Forums
4 分鐘 前
... I can't do splitting surfaces with any plane, only with original X; Y; Z ones.
SOLIDWORKS Forums
4 分鐘 前
I want to create a macro to do below. Read the part number in BOM, It will replace the description if it sees toolbox hardware
SOLIDWORKS Forums
10 分鐘 前
I just installed SW Professional and I found the mating function has changed some. With certain mates, when I click two features to bring some parts together, one of the parts will move in two or three directions rather than one or two as in previous releases. I think the intent of this is to put the parts closer together so they are easier to select for additioanl mates. In reality, this almost always puts one of the parts behind some other object so I have to do some extra work to bring the
SOLIDWORKS Forums
11 分鐘 前
How many times do you see a great thread get trashed or hijacked for various reasons and I'll take the "Stand" and say I'm the worst for doing that.. So when I'm acting stupid tell me to trash it here, get it?? Rants - Cheers - Pet Peeves - or your Aunt Lilly, bring it.. (More then likely the dumbest thread anybody started, but I tried to keep it stupid, stupid) - The Forum Moderators rules still apply, no obscene pics, raunchy language and personal attacks, those will be reported and deleted if
SOLIDWORKS Forums
16 分鐘 前
We are currently in the process of trying to find ways to optimize our production. One of them was to find a way for the welders to be able to place parts without having to get their measuring tape out. We've looked at inkjet marking, laser etching, we've tried having positioning points both at the bottom and at the top of the flange so that it would give us the angle of positionning at the same time.
SOLIDWORKS Forums
18 分鐘 前
I found this article and peaked my curiosity. What's your go-to music while you work?
SOLIDWORKS Forums
23 分鐘 前
There are files such as 3D models for hardware I don't want to have revision controlled. what feature/option I can use for this task Create a state in your workflow (from the initial state) that has no further transitions options.
SOLIDWORKS Forums
35 分鐘 前
Flat Pattern Multi-Bodied Sheet Metal Part Is there a way when exporting flat patterns to DWG/DXF to have all the flat patterns inserted into the ACAD Model instead of creating multiple layout tabs for each individual flat pattern?
SOLIDWORKS Forums
39 分鐘 前
I just came to Works from Edge. My first step was setting up gauge tables. Now that I am using gauge tables, when I pick a different table (One for carbon, Aluminum, Stainless, each)
SOLIDWORKS Forums
44 分鐘 前
I loaded several jobs in the Queue this last week and expected them to be completed. Upon checking this morning apparently they all failed. Is there a place I can view why they failed?
SOLIDWORKS Forums
50 分鐘 前
the point system isn't updating again andRichard Doyleis on vacation. Just my luck. I was hoping to catch up with Deepak today.
SOLIDWORKS Forums
57 分鐘 前
Change annotation view I want to export Dimxpert dim. in drawing .As i show in pic . I want to show the diameter in front view1.png
SOLIDWORKS Forums
1 小時 前
i was wondering if anyone has come across a marco to export solid bodies to individual step files ? You should b able to use 2 functions from the#TASKto achieve the desired results.
SOLIDWORKS Forums
1 小時 前
I created a plate weldment so that I could include it in my weldment table with the description automatically filled out with the size. What I want to be able to do is delete the length property for all my plates or just put NA. I've tried doing this but it seems that I can't modify it. Is there a way to do this without modifying the BOM?
SOLIDWORKS Forums
1 小時 前
I get this message every single time close out of Solidworks. It will not go away until I select "Close the Program". My Solidworks is running very slow since I upgraded from 2016 to 2017 and I'm just wondering if this could
SOLIDWORKS Forums
1 小時 前
Non-technical Thread: Favorite Quotes Let's try to keep this thread on topic. Just post your favorite quotes.
SOLIDWORKS Forums
1 小時 前
vertical attribute text I am creating symbols in SWE and am inserting attributes vertically. I set the rotation at 270°and when the symbol is open the text is 270°, but when I save thesymbol and update the symbol on the schematic the text becomes 90°.
SOLIDWORKS Forums
1 小時 前
Inspection Dimension Sometimes Circles First Line Only I've searched and found that some have asked a similar question before but none have a good answer. I have some holes that need to be inspection dimensions.
SOLIDWORKS Forums
2 小時 前
This was an imported .prt file that was run through the feature recognition software. I examined all of the features and sketches and all seemed to be ok, I left them as imported with only the base being defined. The bolt circle seems to be created correctly and has it's centerpoint at (0,0), the centerbore cut sketch seems to be at (0,0), but when I convert them to sketches all of a sudden they are out of concentric by about .002".
SOLIDWORKS Forums
2 小時 前
I have an assembly model and from this model, I need to have several drawings from this model but its deferent template on each drawing. When I use pack and go on the assembly, it doesn't take all the drawing, it only takes 1, is there any way I can do it or it's impossible? I don't believe it's possible.
SOLIDWORKS Forums
2 小時 前
I need to produce a web routing diagram and can't see how to force a profile (Sketch17) to follow two 3D lines (3DSketch5) such that it produces the appropriate sweep, a twist in this case, by default. In the attached file I fudged this by using the Twist control in Sweep Options, but this is not the same as having the profile 'ride' the two lines to ensure model accuracy. In this case, the web guides are at right angles to each other, but this may not always be the case and generating the web
SOLIDWORKS Forums
2 小時 前