쿠키를 사용하여 이 웹 사이트를 운영하고, 사용성과 방문 추적을 향상시킵니다. 이 사이트를 사용할 경우 쿠키 사용에 동의한다는 점에 유의하십시오.
자세한 정보 |
Did you know that Solidworks rescinded the ability to activate your license on two separate machines? This was super handy when you had a portable laptop and an office computer setup. Or, some call it a "home" license, allowing you to activate at the office and at home. Now we have to transfer our license between the computers or purchase an additional license for the second machine.
SOLIDWORKS Forums
9 분 전
If you could do a few of these things it would make our navigation and voting for the top ten list much easier and therefore more effective: 1. Provide additional sort options such as
SOLIDWORKS Forums
37 분 전
Average Part Thickness I am searching for a way to export the average thickness of a part file to a spread sheet. The parts I am working with are injection molded components and most of them have fairly uniform wall thicknesses.
SOLIDWORKS Forums
1 시간 전
Do you use the Measure Tool in SOLIDWORKS? If yes, I want to gather a little input on the tool from you. Can you please share some information on few queries below:
SOLIDWORKS Forums
1 시간 전
We actively work to extend and improve the information in theSOLIDWORKS Knowledge Base. We publish about 100 new solutions each month, and we are on track this year to review and refresh more than 5000 old solutions. A KB search might quickly answer a question or help you solve a problem.
SOLIDWORKS Forums
2 시간 전
(This may have been asked before, if so, if you kindly led me to a pertinent discussion I would appreciate it. I have read several threads that didn't particularly go where I wanted.) I am working on a part (or components) that consists of 4 pieces, and doing top-down methods for the first time.
SOLIDWORKS Forums
2 시간 전
At the completion of a drawing we normally have to create a PDF and dwg version of the solidworks drawing. These are also stored in the vault. Is it possible to drag the data/variables stored in the drawing file into a dwg or PDF file?
SOLIDWORKS Forums
2 시간 전
Appearances Having a small issue with Appearances. When I apply it to my part at assembly level, it changes a pastel color that I don't want. Even if I have this option turned of in the 'Edit Material', it still shows anyway.
SOLIDWORKS Forums
2 시간 전
I searched around the forum to find a macro that will copy the Custom properties to all the configurations in a part or assembly. I did not find one specifically but found enough bits and pieces that I was able to put one together. I have attached the macro just in case someone else has the same requirements.
SOLIDWORKS Forums
2 시간 전
How to open Future Version file in Old Version. From SW2012 SP 5 you'll have the option to do this but for now there is no direct option. The only way is to get the files converted in iges, step, etc. format and then open in lower versions.
SOLIDWORKS Forums
2 시간 전
I wanting to know how I could get this blocked to form to the tire. Will be using a block of rubber and would like some help thanks. Here are the components thanks.
SOLIDWORKS Forums
2 시간 전
I can't open the 3D model from McMaster-Carr because I older version of SW. I selected the step file but don't know how to save Parasolid (*.x_t) file to part file. There is no options for me to choose. Thank you
SOLIDWORKS Forums
2 시간 전
I was under the impression that when your drawing screen was in the 4 view port configuration, when you edit a spline handle it was supposed to move co planar to the active view port ONLY. That doesn't seem to be the case. When I move a spline handle in the "right" view port I see it get whacked out in the "top" view port.
SOLIDWORKS Forums
2 시간 전
So I had this tricky sheet metal part to model for a customer . I couldn't seem to build the part and then add the cut out on the top with out errors (This feature can not be unbent). So I made pre cuts to make them separate flanges running on the same plane. if you have a look at the pictures of the part you can see I have these 3 flanges coming off the one over 90° bend. Then I add the next flange at 90° and tried to merge this area all together with drawing in the relief . but if I merge
SOLIDWORKS Forums
2 시간 전
I have a flange that I have designed to mate with a 4" male NPT (tapered). I have never had to designate anything other than standard threads before, so I am at a loss here. I had a simple callout notating " 4" NPT TAPERED " - my co-engineer marked it and said that I needed to indicate thread engagement as well.
SOLIDWORKS Forums
2 시간 전
I'm certain I'm not the only one to ask this, but I can't seem to find anything on recording C# macros within Solidworks. I only have the VBA option. Also, I got MS Visual Studio installed and I can run C# macros from that, but is it possible to run it from within Solidworks i.e. setup a macro shortcut button?
SOLIDWORKS Forums
2 시간 전
Can someone please explain to me the difference between a virtual wall and the advanced fixture where no movement is allowed in the normal direction to a flat plane? I understand that with a virtual wall, you can control the stiffness of a contacting surface, but if you assume that surface is infinitely rigid, what is the difference between the two? Or is their use more dependent on the application of your study?
SOLIDWORKS Forums
3 시간 전
I made a frame using c-channel and all I get to show up in the cut list is "material ". When I specify the matirial all I get is "AISI 1020" in the description and length fields. There doesn't seem to be any fields that calls out the actual beam size or length. Am I missing something?
SOLIDWORKS Forums
3 시간 전
Part Extraction Error In most of my projects I use appearance gruping so theres no monitor file option. Now I decided to remowe few geometries from project that I have spend a lot of time on.
SOLIDWORKS Forums
3 시간 전
I am currently setting up different tables in drawings. These tables are dependent on the item numbers as displayed in the BOM. Whenever the item numbers inside the BOM changes due to updates, the text numbers in the tables are incorrect. This is quite a pain and increases the chance of making a mistake drastically!
SOLIDWORKS Forums
3 시간 전
I'm not sure if what I want is possible. If it is not possible, I will just create two separate add-ins. Here's what I want my program to do:
SOLIDWORKS Forums
3 시간 전
I have used the PACK & GO to copy the assembly & drawing (DRAWING A), saved it as DRAWING B, and modified it afterwards. However I have noticed that after all the modification I have done in the DRAWING B, the original drawing (DRAWING A) has also been modified as what I have done in Drawing B. Although the modified date of Drawing A is the same. Could you please advise me why is this happened?
SOLIDWORKS Forums
3 시간 전
The reason I'm asking is because I'm subscribed for 1 seat, but i really need to be able to work from home aswell. I have a large Xeon workstation and two 28" 4k screens at home, and it really helps me being productive.
SOLIDWORKS Forums
3 시간 전
We implemented the EPDM server a while ago, to NOT ALLOW duplicate files. We are wanting to migrate data into the system which has several duplicate files in many folders in many locations. Are we able to remove the duplicate file names on the server without experiencing any problems...........any advice to doing this is appreciated.
SOLIDWORKS Forums
3 시간 전