Per gestire il sito Web, renderlo più facile da usare e tenere traccia delle visite vengono utilizzati i cookie. Utilizzando questo sito Web, acconsenti all'uso dei cookie.
Ulteriori informazioni |
I need to merge the geometry from 2 different part files into one solid model. How can i do this? Jive Software Version: 2016.3.6.0, revision: 20170209151852.c6d8942.nomerge_2016.3.6
SOLIDWORKS Forums
18 giorni fa
Hello everyone, I have been using CATIA and Solidworks for more than 2 years. In 4 months ago, a problem occured in those programs. I can open Solidworks and Catia, I can click on toolbar and all other buttons in those programs. But, the drawing screen which you draw your part, freezes and dont open.
SOLIDWORKS Forums
18 giorni fa
I'm performing a (linear) buckling analysis on a tank filled with liquid. I've fixed its legs and put variable pressure to simulate liquid load:
SOLIDWORKS Forums
18 giorni fa
I'm trying to source a macro that will locate the centre of mass/gravity of all components within an assembly relative to a specific point (i.e. the assembly origin) and export this information to an excel file. I realise this has been brought up on several other forums but as yet there doesn't seem to be a solution. Effectively I'm trying to incorporate the parametric capabilities of solidworks to iteratively optimise the structural configuration of a concentric shaft/bearing arrangement.
SOLIDWORKS Forums
18 giorni fa
What mate is applicable here? I have used the cam follower mate which makes the follower follow the surface. but how do i make my cam follower roll? Jive Software Version: 2016.3.6.0, revision: 20170209151852.c6d8942.nomerge_2016.3.6
SOLIDWORKS Forums
18 giorni fa
Every year after solidworks world ends all presentation were loaded to a web site and placed out in the open for those who came and those who were not able to arrive. This year not only that the previous year presentations were removed, you have to get a login of the registration in order to see those presentations.
SOLIDWORKS Forums
18 giorni fa
Creating Threads I'm not a SolidWorks user but a friend of mine is helping me to create an aerator for a faucet and is having problems with creating the threads. I gave him the thread sizes which are 15/16" male threaded and 55/64" female threaded with 27 threads per inch.
SOLIDWORKS Forums
18 giorni fa
Apologies for this being a longish post, but wanted to include enough screen shots for clarity. We are having an issue with getting some part variables to appear in derived BOM columns. As shown below, some parts' variables come in fine, while others do not.
SOLIDWORKS Forums
18 giorni fa
In a weldment cut list, is there any way to include the "Length" variable in the Description string for items created via weldment profiles (sldlfp)? The entry above was created by manually adding the "Length" property to the Description string in the model cut list, item by item. Though effective, this was slow and not something that I'd trust the average user to do for every welded part.
SOLIDWORKS Forums
18 giorni fa
We have an assembly that consists of more than 4000 parts. When its put into a drawing and exported out on a few sheets (2-6) which is a building layout for a customer the file size is huge. Average size is around 14 MB. That size of file is not easily emailed.
SOLIDWORKS Forums
18 giorni fa
SolidWorks Simulation is unable to create a report because it failed to instantiate Microsoft Word.....We are running SW2013SP5.0 and MS Office 2010SP2.0. Both of these programs were loaded as updates, not clean installs. Our WorkStation registries are well protected under group policy. I am trying to get a report from Simulation.
SOLIDWORKS Forums
18 giorni fa
We have a lot of pieces that are similar with variations in length or thickness, etc. but for each part, we call them different in the same modeling file by using configurations and of course, once modeled, I need to make the corresponding 2D drawing (.slddrw) in the same file but different sheet for each configuration. So I tried to make a template in order to automatically call properties such as part number, material, etc. by using custom properties on the model. However it calls only the
SOLIDWORKS Forums
18 giorni fa
I am looking for a Vendor who makes M4.5 Socket Head Cap Screws. Perhaps some of our eastern hemisphere folks could assist? M4.5 SHCS are of an OBS standard, but we still have a requirement in design.
SOLIDWORKS Forums
18 giorni fa
Frequently Asked Forum Questions I put together a list of questions that seem to get asked fairly often, along with their answers, so here it is (they're in no particular order). Hopefully the Forum members will find it helpful.
SOLIDWORKS Forums
18 giorni fa
This happens on everything I animate in Visualize. Am I doing something wrong? Whenever I duplicate a keyframe and move it over to the right it changes all the settings around. I need parts to remain stationary for a selected time then start moving again later in the timeline.
SOLIDWORKS Forums
18 giorni fa
The report generator to word is not working and I was hoping there was another method to generate a report. Jive Software Version: 2016.3.6.0, revision: 20170209151852.c6d8942.nomerge_2016.3.6
SOLIDWORKS Forums
18 giorni fa
When I am in an assembly or a part solidworks is real jumpy and/or knotchy. When I move the model around it will disappear from the screen and/or stop for a few. If I do not give it time to catch up it will shut down. It is really bad in mate.
SOLIDWORKS Forums
18 giorni fa
I am new to the forums so hopefully this is all posted correctly in the right place.... I am trying to make a macro in excel that will take an inputted file name and folder name and, going to epdm, grab the BOM and print it in the excel document. I am trying to compare this BOM to another BOM grabbed from a different program and make sure they are correct, all in one click.
SOLIDWORKS Forums
18 giorni fa
In my workplace there is an upgrade to Solidworks 2017 SP2. I want to know if I can Supress an ecuation in an assembly?
SOLIDWORKS Forums
18 giorni fa
Question for my fellow PDM Admins... I am testing Named BOMs originating from Computed BOMs and originating from Item Structures. I've determined that they are stored in different folder structures in PDM (File Folder structure vs. Item Folder structure).
SOLIDWORKS Forums
18 giorni fa
I have drawn multi bodies in a single file and then separated the drawn parts each in a file after that i tried to convert each single body in to parasolid extension but it tells me (( the file could't be saved because the parts geometry is not valid for this type of save operation )) and when i try to save it as IGES it does nothing and no files is made , how can i fix this ?? I do not see any reason for it but any chance those are surface bodies?
SOLIDWORKS Forums
18 giorni fa
I have been trying to find a way to make my route sketch dimensions and drawing dimensions in inches but then have the length of pipes in feet in the BOM. I was hoping to have this length appear in the quantity column of the BOM. Does anyone have suggestions on how to do this? I have played around with changing the document units in the for the pipe files themselves, the units for the pipe assembly, and the units for the parent assembly that route is in but am still having issues.
SOLIDWORKS Forums
18 giorni fa
I downloaded a screw for plastic from grabcad, link below: I have attached the file I am using.
SOLIDWORKS Forums
18 giorni fa
I want my drawing configuration to be linked with my part configuration so that when I change the part configuration, the drawing updates. Are you planing to save out the different drawings in the different configurations?
SOLIDWORKS Forums
18 giorni fa