isometric section view center line issue Hi, I have created a drawing of an assembly with an isometric section view.
SOLIDWORKS Forums
56 分 前
Hello SOLIDWORKS Power-Users and welcome to the 17th SWPUC. This is the first SWPUC dedicated to SOLIDWORKS Programmers!
SOLIDWORKS Forums
58 分 前
I'm not good at English. sorry. Please teach me your skills.
SOLIDWORKS Forums
59 分 前
I am trying to open documents with a macro and i can do this no worries following the basic code below Set Part = swApp.OpenDoc6("C://..first part....., Filetype, 0, "", longstatus, longwarnings)
SOLIDWORKS Forums
1 時間 前
I am putting together an internal flow simulation problem for air flow entering some pipes at a particular volumatric flow rate and exiting to the normal atmosphere. I've done problems like this before and always set up the boundary conditions the same as I'm doing now, but for some reason it is not allowing me to do so and I am constantly getting "face "whatever"-lid is not laying laying on the boundary region between solid and fluid region. It's set up as internal flow, tried one side with
SOLIDWORKS Forums
1 時間 前
Rename Cut-List Folder Macro I have started to write a macro to rename the Cut-List folder. The folder to be renamed by prefix defined as an Input followed by numbers 001,002 and so on..
SOLIDWORKS Forums
1 時間 前
Attached is a file i generated from a customers geometry. I need a wayin solidworksto create arc segments and lines from this path for our machinists. They use some old version of mastercam and say that the splines generate very huge file that our machines can not directly take due to memory in the machines, and DNC is not and option.
SOLIDWORKS Forums
1 時間 前
Super Nintendo fun! In the 90's my favorite console was the Super Nintendo. So as a small side project, I decided to model it along with a game cartridgeI modeled it using solidworks 2018 and rendered it using visualize 2018.
SOLIDWORKS Forums
1 時間 前
I think i'm missing something to activate the "Insert design table" option in a drawing. I've got a simple ring part with a number of configurations for different diameters, widths, and thickness. In the drawing I'd like to add a table with those configurations, so I've selected a view of one of the configurations in the drawing then click insert-table, but the design table option isn't available. Perhaps I'm misunderstanding what's considered a design table.
SOLIDWORKS Forums
1 時間 前
Maybe it's me, maybe it's my browser, but logging out of this site doesn't seem to work for me. If I'm logged in then go to log out, the site tells me I've logged out. If I then come back to the site though, I'm logged in.
SOLIDWORKS Forums
1 時間 前
Using SolidWorks to build pressure Vessels is great for the modeling. Who else is making Vessels?
SOLIDWORKS Forums
2 時間 前
Solidworks won't "un-minimize" I have a really stupid issue today.
SOLIDWORKS Forums
2 時間 前
I am working on my favorite project creating hydraulic hoses for a feeder assembly. In trying to put together a master sketch for this assembly I have created a 3D sketch with the fixed points and I am running hose lines.With a cluster of hoses together it would be nice to be able to change the line colors for each hose within the sketch. Is this possible?
SOLIDWORKS Forums
2 時間 前
I am trying to find a method to copy the internal PDM version number (Text Properties -> Special Value ->" ") to a user defined variable. I would like this variable to update when a state change takes place.
SOLIDWORKS Forums
3 時間 前
So I just wasted another hour trying to work out why I couldn't select certain sketch contours for an extrude. Searching through the forums I found someone else with this problem, and it was caused by sketch visibility being turned off. As soon as I read this, I knew this was the problem I was having - I've been there a number of times before. The thing is when trying to select contours, it is completely unobvious that sketch visibility has to be turned on as I can ACTUALLY SEE the sketch.
SOLIDWORKS Forums
3 時間 前
Simulation problem. Hello I just got the simulation software, and ran into a problem.
SOLIDWORKS Forums
3 時間 前
Shift 'C' is a great shortcut to collapse the Feature Manager tree. But is there a single command to do the opposite and EXPAND the complete FM tree? Mine doesn't collapse, it scrolls down.
SOLIDWORKS Forums
4 時間 前
How can I display a sheet metal gauge in draft? I am not clear what you mean "in Draft".
SOLIDWORKS Forums
4 時間 前
How many times do you see a great thread get trashed or hijacked for various reasons and I'll take the "Stand" and say I'm the worst for doing that.. So when I'm acting stupid tell me to trash it here, get it?? Rants - Cheers - Pet Peeves - or your Aunt Lilly, bring it.. (More then likely the dumbest thread anybody started, but I tried to keep it stupid, stupid) - The Forum Moderators rules still apply, no obscene pics, raunchy language and personal attacks, those will be reported and deleted if
SOLIDWORKS Forums
4 時間 前
It would be great to be able to access the Bounding Box data about the part directly using API. Summary - Add API object to get data from the Geometry Bounding box
SOLIDWORKS Forums
4 時間 前
Fixing route sketch Sometimes whe we move components around, the route sketch goes wild (below).
SOLIDWORKS Forums
4 時間 前
i am trying to edit a igs 3d model, i am trying to fill holes and create new ones Does the IGES file come in as surface bodies, solid bodies, or a combination?
SOLIDWORKS Forums
5 時間 前
Hi, This is my first time here. I trying to develop a application to rename pdf files without breaking references. I know exactly what files and what there corresponding desire new file name is. Can somebody point me to the Interfaces/methods that will allow to check out a file, change file name without breaking anything like references, and check it back in.
SOLIDWORKS Forums
5 時間 前
Bonjour tout le monde, je découvre petit à petit solidworks cam 2018, et je suis à la phase de création de la forme de l'empreinte. en mentionnant que cette empreinte contient beaucoup de formes. Pouvez vous me donner les étapes à suivre pour arriver jusqu'à l'obtention du code G de ma pièce. je vous remercie. Je joins une image relative de l'empreinte à produire:
SOLIDWORKS Forums
5 時間 前