Hello SOLIDWORKS Power Programmers and welcome to the 18th SWPUC! I was asked by some of the members in the forum to provide quick challenges for weekends. So let's try one right now.
SOLIDWORKS Forums
2 日間 前
how can i make Ordinate dimension to show the diference betwen the last point and next, besides showing the valor from zero, show the valor from the point before and the point after. Welcome to the forum. I'm not sure I understand all of what you're trying to do, but I'm pretty sure you can't do all that within the same ordinate dimension group.
SOLIDWORKS Forums
2 日間 前
Decal Wrap Issue Hey everyone, I'm trying to get this picture to wrap around this cylinder, but the last bit of it gets cut off as shown here...
SOLIDWORKS Forums
2 日間 前
This is more of a general Solidworks question. As far as I can tell, these were saved in exactly the same manner. I didn't change the case.
SOLIDWORKS Forums
2 日間 前
fill surface body could someone please help me fill this surface body? It was made in sw2016.
SOLIDWORKS Forums
2 日間 前
THOSE CHINESE PIRATES!!!!
SOLIDWORKS Forums
2 日間 前
We have been using routing for 10+ years now in plant design. In my opinion this is an add-on that SW started and has flat-ined in advancements. What are everyone elses thoughts?
SOLIDWORKS Forums
2 日間 前
With 2017 PDM Professional, the ability to replicate databases for Read Only queries, using SQL's AOAG technology also became available. ,database replication
SOLIDWORKS Forums
2 日間 前
When you mirror a component in an assembly, is there any way to have the features before the mirror stay linked to the parent, but the features created on the parent after the mirror be unique? For example (brace yourself), if I have part1 with 3 features, and I mirror that to create part2, can I create a unique 4th feature on part1 and have it not appear on part2 while still propagating changes to the first 3 features? ,mirror_components
SOLIDWORKS Forums
2 日間 前
As per the picture except instead of choosing a predetermined configuration, a fillable field(s) that is used to dimension the part. For example: For this part, a field that specifies hole diameter instead of choosing one from the list.
SOLIDWORKS Forums
2 日間 前
I have experienced a bug in the rounding behavior between SolidWorks and Inspection Add-In. When a limit tolerance is applied to three places, with the last digit being a 5 (ex: +.025), and the precision is only displayed to two places, SolidWorks rounds the number UP on the drawing, but rounds DOWN inside Inspection. I attached a photo showing the discrepancy.
SOLIDWORKS Forums
2 日間 前
Hey SOLIDWORKS users – we'd like your feedback! Many of you have tried the3DEXPERIENCE Marketplacethat deliverson-demand manufacturing and intelligent part sourcing capabilities. It’s a great place to go when you need to find the right commercial component for your design or select a trusted manufacturer. We’d like to hear from you regarding your experience at the Marketplace.
SOLIDWORKS Forums
2 日間 前
Editing Assembly Part Linear pattern Hello, another newbie question here. I have came up to a similar problem which I just encountered in the past.
SOLIDWORKS Forums
2 日間 前
Is anyone experiencing slow drawing opening or slow switching from an assembly to a drawing. I get the viewing at the top but it is not open yet. I don't believe it is my machine because it did it with the old machine.
SOLIDWORKS Forums
2 日間 前
I had a question regarding the best way to draw non-circular spirals. I have created many circular spirals and helixes (not sure if that is how you make helix plural) using the CurvesHelix and spiral tool. I want to create a spiral much like the one in the picture attached. The base of the spiral is a rectangle filleted edges rather than a circle, however, the helix and spiral tool requires a circle to function properly (I believe).
SOLIDWORKS Forums
2 日間 前
I've noticed that I have to account for differences in capitalization of file extensions of the same type. For example, some part files are ".sldprt" while most of them are ".SLDPRT". Why is this?
SOLIDWORKS Forums
2 日間 前
I am having a hard time moving my command manager back to where it was when I first installed Solidworks 2012... I double clicked somewhere and now it is on the right side instead of the top....
SOLIDWORKS Forums
2 日間 前
Quite new with this way of@ doing. I normally build Addins with Solidworks. For this project , there are no reason for it to be an addin. It makes more sense for it to be a standalone application.
SOLIDWORKS Forums
2 日間 前
I have a user that is receiving email notifications and can't follow the link to the file. Can anyone remind me where this setting is located to give them permission? They are receiving the error shown here:
SOLIDWORKS Forums
2 日間 前
Does anyone have script that I can add to the PDM Pro Convert Task that will add the conversion, or created, date & time as a note, stamp, or text to the PDF during the conversion process? My company is trying to go paperless and create PDF's of our drawings (both DRW's and DWG's, new and legacy files). We use PDM Pro and the convert Task to generate the PDF during different transitions and would like to indicate the time of the the PDF generation if printed in hard copy form.
SOLIDWORKS Forums
2 日間 前
Hey everyone. I have modeled a Sterling engine and ran it through Visualize to try my hand at rendering. Now I am super new to visualize, and I have gone through the self paced learning on My.SolidWorks.com but I was hoping to get some feedback on what I may be able to do to get a more realistic image. I'm not entirely sure why, but this still looks "modely" to me.
SOLIDWORKS Forums
2 日間 前
Hello, I am looking for a macro wich copy all costum and configuratin propertys to my drawing property. Someone has an idea? Thanks a lot!
SOLIDWORKS Forums
2 日間 前
Non-technical Thread: Favorite Quotes Let's try to keep this thread on topic. Just post your favorite quotes.
SOLIDWORKS Forums
2 日間 前
As I understand it, the different display states affect the weight and CG of assemblies as follows: - Maintains mates while hidden
SOLIDWORKS Forums
2 日間 前