This lesson contains exercises so you can improve your proficiency with Features and Parts before taking the Certified SOLIDWORKS Associate (CSWA) exam. There are 12 practice exercises for Features and Parts so this is the first of two lessons containing these exercises.
Structure System is an advanced weldment environment that lets you create and modify structural members of different profiles in a single feature. Add primary members using sketches, points, edges, reference planes, and surfaces. Add secondary members using primary members and reference planes.
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
선형 커플러 메이트는 한 부품의 평행이동과 다른 부품의 평행이동을 링크합니다. 평행이동은 어셈블리 원점 또는 참조 부품에 대해 정의한 축을 따라 발생합니다. 선형 커플러 메이트를 정의하기 위해 면과 참조 부품을 선택합니다. 다른 부품과 관련해 한 부품의 모션 비율을 설정합니다.
점, 모서리, 면 등 두 개의 유사한 요소가 평면 또는 평면 면을 기준으로 대칭이 되도록 구속합니다. 대칭 메이트는 부품이 아닌 사용자가 선택한 요소를 대칭화합니다. 대칭 메이트에서 사용 가능한 선택 사항을 이해합니다. 참조 평면을 기준으로 두 개의 평면 면이 대칭이 되도록 구속합니다.
곡면처리 기법을 사용하여 필렛이 원하지 않는 결과를 산출하는 곳에 사용자 정의 혼합을 작성합니다. 면 삭제 명령을 사용하여 모델에서 원하지 않는 면을 제거합니다. 면 곡선 및 스케치를 사용하여 잘라낼 경계를 작성합니다. 혼합을 위한 깔끔한 경계면을 만들기 위해 면을 잘라냅니다. 곡면 채우기 명령을 사용하여 모든 인접한 면에 접하는 곡면을 작성합니다. 곡면 붙이기를 사용하여 모델에서 곡면 바디를 결합합니다. 두껍게 명령을 사용하여 곡면을 솔리드 지오메트리로 변형합니다.
Learn to shorten, extend, or add corner treatments to a structure using the Corner Management tool. Learn to trim and extend structural members. Add simple and complex corner treatments.
This lesson contains exercises so you can improve your proficiency with Additional Tools before taking the Certified SOLIDWORKS Associate (CSWA) exam. The additional tools include reference geometry, configurations, making changes to a model, and more. There are 10 practice exercises for Additional Tools so this is the second of two lessons containing these exercises.
하나 또는 두 개의 원형 방향으로 하나 이상의 피처 또는 바디의 패턴을 작성합니다. 원형 방향은 원통형 또는 원추면, 원형 또는 선형 모서리, 중심선, 축을 기반으로 합니다. 인스턴스 간격을 다양한 방법으로 제어할 수 있습니다. 기존 피처의 원형 패턴을 작성합니다. 간격과 범위를 다양화합니다.
시작단 끝단 목록은 케이블 어셈블리에 배선되는 각 와이어와 이 와이어가 연결되는 커넥터, 단자 블록, 링 터미널 등의 부품에 대한 전기 배선 연결 데이터를 정의하는 Excel 스프레드시트입니다. 시작단 끝단 목록은 연결 및 부품 데이터를 배선 하위 어셈블리로 가져올 수 있습니다. 부품 라이브러리 마법사를 사용하여 부품 라이브러리를 작성합니다. 케이블 와이어 라이브러리 마법사를 사용하여 케이블 와이어 라이브러리를 작성합니다. 부품 라이브러리와 케이블 와이어 라이브러리를 기반으로 시작단 끝단 목록 마법사를 사용하여 시작단 끝단 목록을 작성합니다. 배선 작업을 시작하기 위해 커넥터를 배치합니다. "안내선" 배관 모드를 사용하여 배관을 위한 지오메트리를 작성합니다. "자유곡선 재배관" 배관 모드를 사용하여 미리 정의된 클립을 통과하도록 배관을 수정합니다.
Learn how to draw wires to connect symbols and make changes on-the-fly to meet connection requirements. Draw single or multiple wires and modify them as needed. Use the Properties panel to instantaneously view and edit information. Use the Wire Style Manager to define and customize the wires for a project. Number newly drawn wires or selectively renumber existing wires.
This lesson contains exercises so you can improve your proficiency with Additional Tools before taking the Certified SOLIDWORKS Associate (CSWA) exam. The additional tools include reference geometry, configurations, making changes to a model, and more. There are 10 practice exercises for Additional Tools so this is the second of two lessons containing these exercises.
Use Volume features to recognize geometry that does not match any other feature type. The volume feature can be replaced with a standard SOLIDWORKS feature. Recognize volume features. Recognize boss and cut revolve features. Use the Up To Face option with cut extrudes. Replace volume features with standard cut features. Edit the mapped features.