Demonstrating how to log into vaults using the Windows Explorer interface as well as the SOLIDWORKS PDM Task Bar Item icon. Log into multiple vaults using the same log in credentials. Log into multiple vaults using different log in credentials. Log of off vaults. Set up automatic log in functionalities when signing into a Windows user profile.
Create piping drawings with orthographic views, bills of materials, detailed views, and annotations by using the piping drawing and standard drawing tools. Add annotations and dimensions to drawings. Create piping drawings. Add bill of materials to drawing.
Evaluate the size, weight, and more of a model using the measure and mass properties tools. Understand how the material and coordinate system of a part affect its mass properties. Measure between points and circles to determine the size of a part.
Use the ConfigurationManager to add configurations to an assembly and show two versions of its components. Also, explore the advanced options of configuration properties. Use the ConfigurationManager to add configurations to an assembly. Use the advanced options of the configuration properties to control new components and mates. Create two versions of the assembly to represent different available components.
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Make changes to route geometry using 3D sketches. Edit routes by deleting, trimming, and adding sketch geometry. Delete existing fittings and add replacements fittings. Edit existing routes. Delete existing fittings. Add replacement fittings.
Learn to create structural members and pipes for weldments models from an existing sketch. Explore how to properly trim adjoining members and create bends or welded elbows. Create weldment pipes from an existing sketch. Learn to properly group pipes to create proper trimming at corners. View cut-list properties for a specific pipe.
Learn to use a grid system, which is a type reference geometry, to represent a skeleton of structural members. Create a grid system to represent the center lines of structural members.
Search for, manage and view exisiting reports created by SolidWorks Utilities. Export reports to a briefcase or delete reports. Search for, manage, and view SolidWorks Utilities reports. Export and delete reports.
Import a Piping and Instrumentation Diagram file, which describes the routes, lines, descriptions, and connections of a piping system in text format. Create equipment and routing from the imported file. Learn the basic format and content of a P & ID file. Insert equipment from an imported P & ID file. Create a guideline spline for a piping system, and a route that fits the spline.
Explore flat pattern feature options including parameters, corner options, grain direction, and faces to exclude. Create a drawing from a flat pattern, adding dimensions and other annotations. Explore flat pattern options. Create a drawing from a flat pattern.
Understand the characteristics of a large assembly, how SOLIDWORKS opens an assembly, and what can cause it to slow down. Also, a quick look at some possible solutions. Explore what makes a large assembly. Learn the sequence of steps SOLIDWORKS uses to open an assembly. Discover some common large assembly slowdowns.
Use the Split Route tool to add junction points to existing routes. Create geometry at the J-point to orient an in-line fitting. Use the Split Route tool to add a junction point to an existing route. Create 3D geometry at a junction point. Use 3D geometry to orient an in-line fitting.
Create a cut list to organize the bodies in a weldment part. Add custom properties to the components of a weldment structure so the propertie appear in the cut list. Similar to a BOM in an assembly, the cut list provides details of the weldment members. Create and edit a cut list. Edit custom properties. Edit the material of the bodies in a weldment part.
Make modifications to a file using Window Explorer to check the file in and out. Check a file out of the vault. Check a file in the vault.
Walk through the process of starting an electrical route by dragging and dropping electrical routing components into an assembly. Take advantage of auto-routing to connect components. Construct a wire route using the "Start By Drag/Drop" command. Create a route between the endpoints of stub lines with the "Auto-Route" routing mode. Use the "Edit Wires" command to add electrical attributes to a route.
Create and edit rigid conduit and wiring routes to connect two electrical receptacle boxes. Understand that the center line of conduit defines the electrical conduit route. Understand that electrical routing components require hybrid components containing CPoints. Use the Auto Route feature to generate route lines. Edit existing route to add desired components.
Use sketch relations to fully define a sketch and capture design intent. Learn about automatic sketch relations and sketch relations that you add manually. Add relations between two lines to understand common sketch relations. Add relations between circles and arcs to observe additional sketch relations.
Demonstrate the navigation of the vault within the Windows Explorer interface. Locating the SOLIDWORKS PDM tools. Opening files from the vault.
The Design Library contains a number of sample forming tools, including embosses, extruded flanges, lances, louvers, and ribs. Learn to use these standard tools, as well as to create your own simple custom tools, to meet design needs. Drag and drop standard forming tools from the Design Library to form a sheet metal part. Edit a standard forming tool, customizing it to meet individual design needs. Set the stopping face and faces to remove within a part to be used as a custom forming tool.
Insert driving dimensions into a sketch using the versatile Smart Dimension tool. With a single tool, you can create radial dimensions for arc, linear dimensions between two points, and more. The dimension that appears depends on the entities you select. Insert linear, angular, radial, and other dimensions. Modify dimensions. Move and reattach dimensions.
Demonstrate the creation of a reference between a newly created MS Word file and an assembly. Remove the reference using the custom references functionality.
