Create a swept flange using profile and path sketches. Create profile and path sketches for a swept flange. Use the Swept Flange feature to create a swept flange. Define sheet metal parameters within the Swept Flange tab.
Lesson
2 years ago
ENG
JPN
Demonstrating how to log into vaults using the Windows Explorer interface as well as the SOLIDWORKS PDM Task Bar Item icon. Log into multiple vaults using the same log in credentials. Log into multiple vaults using different log in credentials. Log of off vaults. Set up automatic log in functionalities when signing into a Windows user profile.
Lesson
1 year ago
ENG
Understand how to start routing and how the route subassembly organizes and stores the components of a route. Enable the Routing add-in. Locate the Piping, Tubing and Electrical menus. Understand a routing subassembly. Identify routing library components. Use the routing library manager to load settings.
Lesson
3 years ago
ENG
JPN
Create piping drawings with orthographic views, bills of materials, detailed views, and annotations by using the piping drawing and standard drawing tools. Add annotations and dimensions to drawings. Create piping drawings. Add bill of materials to drawing.
Lesson
1 year ago
ENG
JPN
Compare the geometry of two parts to find face and volumetric differences. It is particularly useful for comparisons to imported geometry. Find differences in the geometry of similar parts. Find differences in the volumes of similar parts.
Lesson
2 years ago
ENG
JPN
Use SimulationXpress to analyze deformation of parts by applying fixtures and loads and defining materials. Vary load and/or pressure and customize materials. Learn to start and run SimulationXpress to analyze a single body part. Get comfortable working with items on design tree. Understand that pressure and/or load can be applied only to faces uniformly and constantly. Understand that custom materials properties must accurately represent part materials.
Lesson
3 years ago
ENG
JPN
Create face fillets to modify and repair imported geometry. Define the size and shape of the fillet using selected faces and edges instead of a constant radius value. Use options such as Curvature continuous, Constant width, Tangent propagation, and Hold lines to define the face fillet. Modify imported geometry using a face fillet. Ensure curvature continuity with faces adjacent to the fillet. Set a constant chord length of a fillet. Define a stopping edge, or hold line, for a face fillet.
Lesson
3 months ago
ENG
JPN
Use surface tools to create complex blends at the intersections of surfaces. The tools used in this module include trim surfaces, lofted surfaces, and fill surfaces. Trim surfaces using a sketch as the trim entity. Create a blend between surfaces using a lofted surface. Fill an area that is completely bounded by surfaces using the fill surface tool.
Lesson
2 years ago
ENG
JPN
Learn how to set up the CFD analysis in FloXpress. Understand the four pages for setting up an analysis: Check Geometry, Fluids, Flow Inlet, and Flow Outlet.
Lesson
3 months ago
ENG
Evaluate the size, weight, and more of a model using the measure and mass properties tools. Understand how the material and coordinate system of a part affect its mass properties. Measure between points and circles to determine the size of a part.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the ConfigurationManager to add configurations to an assembly and show two versions of its components. Also, explore the advanced options of configuration properties. Use the ConfigurationManager to add configurations to an assembly. Use the advanced options of the configuration properties to control new components and mates. Create two versions of the assembly to represent different available components.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Explore gauge tables and bend tables which store default values of specifc parts. Populate and utilize sample tables provided during installation. Create and customize the sample tables to meet your own needs. Customize and create bend tables. Understand the use of gauge tables and bend tables.
Lesson
2 years ago
ENG
JPN
Make changes to route geometry using 3D sketches. Edit routes by deleting, trimming, and adding sketch geometry. Delete existing fittings and add replacements fittings. Edit existing routes. Delete existing fittings. Add replacement fittings.
Lesson
1 year ago
ENG
JPN
Use sketch relations and dimensions to fully define a sketch. Understand the status of a sketch, either under defined, fully defined, or over defined. Evaluate a sketch to determine why it is under defined.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Learn to create structural members and pipes for weldments models from an existing sketch. Explore how to properly trim adjoining members and create bends or welded elbows. Create weldment pipes from an existing sketch. Learn to properly group pipes to create proper trimming at corners. View cut-list properties for a specific pipe.
Lesson
1 year ago
ENG
JPN
Use automatic sketch relations to capture design intent as you sketch a profile. Identify the icons that appear on the cursor to signify automatic sketch relations. Create a sketch profile and add automatic sketch relations as you sketch.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create 2D or 3D curves defined by mathematical equations. The curve can be explicit where y is a function of x, or parametric where x, y, and z are functions of t. Create a 3D spline using a parametric mathematical equation. Create a sweep feature using one 3D spline as the path and another as the guide curve.
Lesson
2 years ago
ENG
JPN
See how to import an assembly into SOLIDWORKS Treehouse, then make modifications to the assembly. Edit the custom properties, quantities, and suppression state of components in an assembly. Add a sub-assembly and parts to an assembly in SOLIDWORKS Treehouse. Open assemblies in SOLIDWORKS and review the modifications made in SOLIDWORKS Treehouse.
Lesson
4 years ago
ENG
Learn to use a grid system, which is a type reference geometry, to represent a skeleton of structural members. Create a grid system to represent the center lines of structural members.
Lesson
1 year ago
ENG
JPN
Use this tool to find the differences between two bill of materials (BOM) tables. Differences include changes in quantity, part number, etc.. Find differences between similar BOMs. Set options of the Compare BOM tool. Interpret the output of the Compare BOM tool to identify the differences between BOMs.
Lesson
2 years ago
ENG
JPN
A parting line borders the surfaces that belong to the core and the cavity of a mold. Learn to automatically select a parting line or manually select one for more complex models. Learn how to scale parts to adjust for shrinkage. Perform a Draft Analysis to display faces with positive and negative draft. Create a parting line feature manually and automatically.
Lesson
3 months ago
ENG
JPN
Search for, manage and view exisiting reports created by SolidWorks Utilities. Export reports to a briefcase or delete reports. Search for, manage, and view SolidWorks Utilities reports. Export and delete reports.
Lesson
1 year ago
ENG
JPN
Copy instances of one or more features or bodies by mirroring them across a reference plane or planar face. The resultant copy is reversed, as if seen in a mirror, maintaining symmetry. Create mirror patterns of features and bodies. Control results with geometry pattern option.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS