了解 SOLIDWORKS 用户正在讨论些什么。
Troubles with tabs disappearance I am having trouble to find my tabs(normally four of them), sketch, evaluate,etc, any help approciated.
SOLIDWORKS Forums
1 天 前
Impossible save design table If I open the design table into SW, any change is saved, but if I open the design table in new window after close it and saving the part appear the message:
SOLIDWORKS Forums
1 天 前
I've recently discovered the very frustrating thing called "Suppress new features & mates" checkbox in the configurations properties window. Now, I know this wasn't here before, and I also know that such a function did not cause me problems before. I noticed that if I create a new configuation manually it doesn't necessarily check the box.
SOLIDWORKS Forums
3 天 前
I have an assebly driven by a part of just sketchs (I'll call this part: master), so each part of the assembly refer to one or more sketchs of "master". The master's sketchs are driven by a design table in order to update all parts of assembly in once.... (more or less...)
SOLIDWORKS Forums
3 天 前
configuration error Now i place this part in an assembly and when i rebuilt the part i have a message from SW that the rebuilt part haw an error (scr6) and when i go to part edit and looking the config tree i have an X sign beside it (scr7)
SOLIDWORKS Forums
4 天 前
This is my 1st post on the forums here, although I've been frequenting them for years. I've got an issue...well, several issues actually, with the Configuration Publisher functionality inside of Solidworks. I don't have a great deal of experience using it, but I've got an application where I think if I can get it to work correctly, it offers some real advantage. But I've exhausted every option, rebuilt, researched, tried different approaches and I'm just at a point where I'm a bit stuck in the
SOLIDWORKS Forums
4 天 前
I have a piece of aluminum extrusion that i would like to make multiple configurations of and link the extrusion lengths to a Master Sketch which is a 3D sketch. The part is at the same tree level as the master sketch. The equation that drives the extrusion length is "D1@Boss-Extrude1" = "Leg@3DSketch1@Ref_Geometry .Part"
SOLIDWORKS Forums
8 天 前
I made a 3D model if a spiral, that resembles a cable of sorts. The goal is to determine how many cables can fit in a spiral formation in my company's machine. I can determine the ID and OD of the spiral formation, but the goal is to determine how many wires can fit in the spiral formation.
SOLIDWORKS Forums
15 天 前
I read on another thread to add an assy level sketch that's driven by the part level dimension that changes. Then use this assy dimension in the design table. It works great.
SOLIDWORKS Forums
16 天 前
I am checking to see if anyone has developed a macro that saves a flat pattern sheetmetal dxf file using the configuration name. I have sheet metal parts that have numerous configurations, all of the parts have unique configuration names. ,configurations
SOLIDWORKS Forums
17 天 前
Dennis DohogneOct 22, 2018 4:05 PM(in response to Kostas Stergiopoulos) The easiest way to answer "Will this go into a Design Table?" is to manually make at least two different configurations where they are different in the way you want to control with a DT. Then insert a DT and let SWX automatically populate it. It will add anything that is different between the configurations that it can control.
SOLIDWORKS Forums
24 天 前
Problem: If I try to insert a design table into a part or assembly document, nothing happens. Like literally. Nothing happens at all. No errors, not screen flash, nothing.
SOLIDWORKS Forums
25 天 前
Maybe try inserting a part at the top of the feature tree. Then put sketches, solids, surfaces, anything you want in that part. Now use that part to drive the other parts in the assembly. Search the forum for Master Sketch or Skeleton Sketch Part.
SOLIDWORKS Forums
29 天 前
I have a nesting software that works within solidworks and gives me 3D assemblies of my sheets and when it nests multiple sheets it puts each sheet into its own configuration. Is there a quick way to turn each configuration into its own assembly? that way I can have each sheet be a separate file?
SOLIDWORKS Forums
29 天 前
I have two Independent part files, say part 'A' & part 'B' with design variations. Instead of keeping two independent part files with different file names I decided to use just one file name and keep the variants as a configuration. I know I can delete the latest revision, revision 'B', keep revision 'A', create a configuration within revision 'A', that would show the changes that would have been on revision 'B' but I do not want to start from 'A' & re-do the changes on it's configuration. Is
SOLIDWORKS Forums
29 天 前
I'm looking into the possibility of inserting a general table into a part document, and linking the cells to specific Custom Properties and/or Global Variables. I want the user to be able to change the values in this table and the linked variables/properties to update accordingly, without them having to go into the Equations manager or Custom Property window directly. I have linked the values for height, width and thickness to custom properties.
SOLIDWORKS Forums
1 月 前
I'm trying to figure out if I can set configuration specific properties in the part so that the value for a property is populated with a value taken from the design table. Yes - that should all be in you Configurations Specific Tab in the Custom Properties of the Part, these are trump over the Custom Tab....
SOLIDWORKS Forums
1 月 前
My VAR couldn't help with this, they said it's not possible.. just seems very strange to me and I was wondering if anyone has a solution/work-a-round updates perfectly but requires a rebuild.
SOLIDWORKS Forums
1 月 前
Design Table: Unsupress Part, Mates stay Suppressed. In 2017 I have an assembly control by a design table. I have a situation where I suppress/unsuppress two parts depending on the configuration.
SOLIDWORKS Forums
1 月 前
We normally would do this with equations but the way we want to do is too complex for solidworks so every time it crashes the Solidworks. That's why we want to do all the equations in DT. Basically, we want to make the DT in the assembly and suppress or unsuppress the boss-extrude1 in the part.
SOLIDWORKS Forums
1 月 前
I am modeling a full sized part and want to scale it down 1/8. I made the part using full size drawings, auto-created a design table, made a row, and divided each column by 8. This generated a new configuration which... only changed a portion of the dimensions.
SOLIDWORKS Forums
1 月 前
Ill give a simple example. I have a board, this board has different cutouts, of varying sizes and locations. Therefore I have different configurations, with cuts suppressed/unsuppressed. The location and size dims modified for the ones that are turned on.
SOLIDWORKS Forums
1 月 前
In the Component Properties dialog box, is there a way of collapsing everything in the configurations tree? I have a part with several levels of derived configurations and hundreds of configurations at the lowest level. When selecting the configuration I want, I either have to scroll through all of them or collapse each tree item until I get to the one I want.
SOLIDWORKS Forums
1 月 前
I have been struggling with design tables that open Excel 2016 within SW 2016. I have a fairly large design table that I have separate issues with not showing all the table data with in a drawing (I will address that in another thread). When I double-click the design table within a SW drawing to edit the table view (what is shown on the drawing), the table opens the SW CAD file, and I usually get a white cross (a mouse icon) that does nothing when clicking anywhere within the Excel or SW windows
SOLIDWORKS Forums
1 月 前