Dowiedz się, o czym dyskutują użytkownicy SOLIDWORKS.
linking external excel with design table I am linking an external excel sheet with a design table that is auto created. But the problem is whenever I am changing the name of the folder containing both the part and excel, the link is not working any more.
SOLIDWORKS Forums
29 minuty temu
My cosmethic thread looks like this: I have "show all annotations" and "cosmethic thread" options enabled. You can see a very slight shade of thread, but this is almost impossible to see.
SOLIDWORKS Forums
1 dzień temu
As the title explains, Configuration Publisher doesn't showing dynamic updated values from Design table. The static values work fine but not the one which are dynamic or updates based on some selection. In the attached file, the design table Range F7:G7 updates based on the plane distance. The design table updates correctly but in Configuration Publisher, it shows one fixed/static value and doesn't update with any changes in F7:G7.
SOLIDWORKS Forums
1 dzień temu
I am creating custom tubes that I can use for routing using a design table. I think I have the most important things down (ID and OD) but would love to add things such as bend radius and material. Can anyone help me with how to edit my table so this is included?
SOLIDWORKS Forums
2 dni temu
What's the difference between these three features which seemingly perform similar tasks? I wish to create one "master" part wherein only one dimension changes (Length) then insert different lengths of that part into an assembly.
SOLIDWORKS Forums
7 dni temu
Is it possible to lock a configuration from ever changing? Ill give a simple example. I have a board, this board has different cutouts, of varying sizes and locations.
SOLIDWORKS Forums
9 dni temu
Is there a hot key to toggle selected check boxes in the configuration modification box? As below I've highlighted the ones I want to unsupress. Can I toggle them all somehow rather than individual selecting them all and toggling?
SOLIDWORKS Forums
9 dni temu
Is there any way for a design table to control the sheet scale that is used in a drawing? Here is my dilemma. I have a master models that have up to 2000 or so configurations. I need to export a drawing of every configuration as a .pdf and a .dwg file.
SOLIDWORKS Forums
14 dni temu
Solidworks design table header character limit I am trying to find out if there is a character limit on the design table header for example "$configurations@xxxxxxxxxxxxxxxxxxxx" .
SOLIDWORKS Forums
18 dni temu
Problem: If I try to insert a design table into a part or assembly document, nothing happens. Like literally. Nothing happens at all. No errors, not screen flash, nothing.
SOLIDWORKS Forums
22 dni temu
Absolutely Aggravating Here's what's happening:
SOLIDWORKS Forums
26 dni temu
Design table problem Design table problem
SOLIDWORKS Forums
27 dni temu
This is a built in tutorial of SWX. What is the reason this dimension is suppressed? Jive Software Version: 2016.3.10.4, revision: 20180516024324.179277c.release_2016.3.10.4
SOLIDWORKS Forums
27 dni temu
In SW2017, I have a part "Part A". It's has multiple configurations controlled by a design table. I have inserted Part A into a new part file to create "Derived Part A".
SOLIDWORKS Forums
29 dni temu
Under defined suppressed configuration components I added a configuration and when I look at the tree, I see the supressed components for other configurations are under defined. The previous configurations all show fully defined supressed components.
SOLIDWORKS Forums
1 miesiąc temu
How do I edit an excel sheet to enter so it shows up on a finished drawing? I have a part configuration with about 30 variants (Dim A, Dim B, Dim C, ect) and need my excel sheet on the drawing sheet. All my prior cad is with Civil3D (autodesk, and my new job is mechanical using SW).
SOLIDWORKS Forums
1 miesiąc temu
i have an assembly that has the same part twice. on those same parts, i need different decals, so I created two configurations. the problem is that every time i change the configuration for one part, the other one is changing too. try this (Display States)
SOLIDWORKS Forums
1 miesiąc temu
creating configuration from single sketch. Please help!!
SOLIDWORKS Forums
1 miesiąc temu
In SW2017, I have some parts with multiple configurations. I need to add some properties under the Configuration Specific tab in File Properties. Is there a way to do this for all configurations or do I have to do it individually for each configuration?
SOLIDWORKS Forums
1 miesiąc temu
Scaling extruded text issue I did a compass part to show North orientation, now I want to add configurations with a few different sizes. When I try, all of the bodies scale up, even the extruded text but my "N" letter does not relocate properly because its "path line sketch" does not scale with it.
SOLIDWORKS Forums
1 miesiąc temu
Is there a way to configure a design library feature from a design table in a part? I have tried $configuration @ featurename in the design table but that doesn't seem to work. The library feature has six configurations and the part has six configurations.
SOLIDWORKS Forums
1 miesiąc temu
I created a design table for simple bleed rings to control size and quantity of thread holes. To control the quantity of the thread holes I used circular pattern, but some of the bleed rings have only 1 thread.
SOLIDWORKS Forums
1 miesiąc temu
Design table configurations regenerate very slow I have a master model that only contains curves. I control the curves with a design table.
SOLIDWORKS Forums
1 miesiąc temu
Excel can't open saved design table? I've created a design table in my part, saved the design table as an Excel file.
SOLIDWORKS Forums
1 miesiąc temu