Does SW2009 allow you to move between cells in a table usingthe arrow keys (like Excel)? Having to double click each cell justto edit text is very cumbersome and time consuming.SolidworksDrawings And Detailing
Hi all, I have a detail view of an assembly that I needed tobe transparent to show covered (Not visible in any of theorthogonal views) parts of the assembly. Can anybody lead me to theright way of using tranparency settings on & off in a detailview of a drawing? Regards, BKSolidworksDrawings And Detailing
I am trying to find a way to automate note selection ondrawings. I was hoping to be able to use the Custom Properties tabto display a list of available notes that a user to select from. Isthere any way to do this?SolidworksDrawings And Detailing
do you have to have a separate drawing template for landscapesheet formats?SolidworksDrawings And Detailing
In SW09 SP2.1 I cannot reliably change the location and Icannot change the size of a note rectangle using the red grips thatoutline the text box. In case in makes a difference, the note I am trying to resize andposition is the user editable comments note in the titleblock.SolidworksDrawings And Detailing
I've set my 'normal' balloon size or offset to 2 places, sothe circle is larger than default, this works as it should for'normal' balloons, but when I place the Revision balloons (ormarkers) the circle is smaller than the 'normal' balloon. Is therea way to change the circle size on Rev balloons (or markers) Thanks sw2009sp3SolidworksDrawings And Detailing
SW will let you enter a negative number in a bilateraltolerance such that you end up with something like 1.000 +.0005/+.0015 Is this type of bilatral tolerance valid per any standard? Itypically tweak the model dimension to bring one limit or the otherto zero so that the dimension looks like: 1.0005 +.0015/-0 Jim S.SolidworksDrawings And Detailing
Is there a way to have a predefined view in a template dwgthat will automatically grab the flat pattern view of a sheet metalpart? thanks.SolidworksDrawings And Detailing
Is there a way to make the hole table not select engravedtext? On a part with engraved text the hole table will add a line in thetable for each letter. The holes can manually be selected to avoidthis, but this can be time consuming when dealing with large partswith a lot of holes. Thanks for any help!
Hi all am quite new to soildworks and need some help please ve created a assmbley drawing and made a secetion view which has afew parts in when i come to hide some of the edges of one part.....whichcontains some tapped holes they wont hide....? but i can hide theother edges within the part not sure why this is happing maybe someone can shed some light onthis? thanksSolidworksDrawings And Detailing
I was sent a drawing package SW09. 80 percent of the drawingsopen fine, but the remaining 20% show only a box with an x throughit. The parts are there, how do I reinsert them into thedrawing?SolidworksDrawings And Detailing
Hello, I have a part in my assembly with a 'default' config (item 1) anda 'mirrored' config (item 2). On my assembly drawing I have inserted a view of the part-'default'config (Item 1). When I place a balloon on it, the balloon calls out 'Item 2'('mirrored' config)!?
When a revision is done should you replace the name with yourown?SolidworksDrawings And Detailing
Strange problem... In drawing one part has hidden lines shown. But these lines are removed in dwg export. Hidden lines in other parts ore shown and export OK, just one partis missing hidden lines.
my default hole call-out for an example tap is: Ø.089 © .299 4-40 UNC © .244 where © = hole depth symbol, just because I can't show thatsymbol here. how can I change this default to only show: 4-40 UNC-2B ©.244 ?? thanks. jySolidworksDrawings And Detailing
Has anyone expereinced PDF's coming out incorrrect using thenew function in 2008 and 2009, generating PDF on check-inSolidworksDrawings And Detailing
I have not used solid works in a year or so and recently havea project I need it for and not sure if I just forgot alot or theprogram has changed. I have to draw a unit cell for the hexagonalclosest-packed structure. Im not even sure how to start thisproject, all input would help alotSolidworksDrawings And Detailing
Iv noticed when u try to change the color of lines it willchange them all that color, but i need to make some lines red andsome lines blue. We've tried making layers but don't know how tomake a specific line a specific layer. So how do you change specific lines specific colors?SolidworksDrawings And Detailing
I have an assembly drawing with several section views. When Iexport to ACAD the components in the section views do not appear.The view looks like and end view. This appears to only be a problemwith this specific assembly.SolidworksDrawings And Detailing
When I demension a diameter I get a leader line between thetwo arrows that I do not want on the drawing. I have poked aroundbut never been able to find how to get rid of that line. So what doI need to do? Thanks, DonSolidworksDrawings And Detailing
Why is it taking the "Insert, Model Items" so long to work? Another slowdown for productive work............SolidworksDrawings And Detailing
i am not able to access standard drawing sheets in sw09student. is it a problem with installation or something addition ineed to do?SolidworksDrawings And Detailing
Is it possible to show hidden lines in a shaded view?SolidworksDrawings And Detailing
Just discovered that pinning your Custom Property Tab willprevent the software from distinguishing between conifgurations.Anyone else notice this one ? I can't remember it being an issueprior to SP3, but then again, maybe it was.SolidworksDrawings And Detailing
