Create basic, aligned, offset, and partial or half-section views, including scope and advanced properties. Add several types of section views to a drawing. Define section view properties. Modify section views.
1 year ago
Insert annotations into existing drawing views, including custom notes, geometric tolerances, and blocks. Create annotations and symbols. Create blocks from geometry and notes. Save a block to a file. Insert a block into a drawing.
1 year ago
The Belt/Chain assembly feature links idlers, pulleys, or sprockets together to achieve the intended rotation of several components simultaneously. Optionally, you can create a belt or chain component part. Select edges of pulleys and idlers for a belt/chain assembly feature. Set the properties of a belt/chain assembly feature.
1 year ago
Use drawing view commands that are specific to working with assembly models including broken out section views, alternate position views, and exploded views. Use drawing view properties to represent assembly configurations. Create a broken-out section view to show internal components of the assembly. Create an alternate position view using an existing or a new configuration. Create an exploded assembly drawing view.
2 years ago
Mirror Component creates opposite-hand, but otherwise identical, versions of parts or subassembies. Specify which components are mirrored and which are purely copied (i.e. fasteners, which should not be mirrored). The geometry of a mirrored component changes to create a truly mirrored version, known as an "opposite-hand" version. Mirror components about an assembly plane. Create mirrored versions of parts in an assembly. Create opposite-hand versions of parts.
1 year ago
Blocks group sketch entities and dimensions together so that they move as one in a sketch. Together with a layout sketch, you can go directly from an assembly sketch to the full assembly. Create, edit and save blocks. Create a layout sketch of an assembly using blocks. Build assembly components based on the existing blocks.
2 years ago
Create display states to control the visibility and display style of components. Display states can be linked to configurations of an assembly. Display states can control hide/show state, display mode, appearance, and transparency of components. Add display states to an assembly. Modify visual properties of components with display states. Explore component selection techniques. Use the display pane. Open an assembly to a specific configuration and display state. Link display states to configurations.
2 years ago
The linear coupler mate links the translation of one component to the translation of another component. The translation occurs along an axis you define relative to the assembly origin or a reference component. Select the faces and reference components to define a linear coupler mate. Set the ratio of motion of one component relative to another.
1 year ago
Constrain two similar entities (points, edges, faces, etc) to be symmetric about a plane or planar face. A symmetry mate does not force the components to be symmetric, just the entities you select. Understand the acceptable selections for a symmetry mate. Constrain two planar faces to be symmetric about a reference plane.
2 years ago
Adjust the mesh density to adjust accuracy of a simulation. Run a simulation. Use the SimulationXpress wizard to view results such as the stress, displacement, deformation, and factor of safety of the simulation. Generate and save an eDrawings file or word document both of which display the results of the simulation. Adjust a mesh in a simulation. Run a simulation. Interpret the results of a simulation. Generate an eDrawing file or Microsoft Word document with the results.
4 years ago
Use surfacing techniques to create custom blends where fillets produce undesireable results. Remove unwanted faces from a model using the Delete Face command. Use Face Curves and sketches to create a trimming boundaries. Trim faces to form a clean boundary for the blend. Use the Filled Surface command to create a surface tangent to all adjacent faces. Use Knit Surface to combine the surface bodies in the model. Use Thicken to transform the surfaces into solid geometry.
4 months ago
Create a variable radius fillet where you set the radius value at selected vertices and control points. Also, you can set the radius to zero to force the fillet to converge to a point. Create a fillet where the radius varies along the selected edge. Modify the radius value at vertices or control points. Create zero radius fillets where the fillet must converge to a point.
2 years ago
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
2 years ago
Learn the best practices for creating sweep profile sketches. Add relationships between the profile sketch entities and the guide curves. Create sketch relations that ensure the correct shape of the profile along the entire path. Set up the path and guide curves before creating the profile sketch. Add pierce relations between the guide curves and the profile sketch. Create a sweep feature with guide curves. Use perpendicular and parallel relations to define the sweep profile.
2 years ago
Connect existing components using orthogonal tubes and standard fittings from the library. Use the Auto Route feature to automatically generate routes Add standard fittings to assemblies. Create orthogonal routes between features.
4 years ago
Insert a reducing outlet tee into an existing route and orient it using keyboard shortcuts and a triad. Use the Auto Route tool to connect the pipes resulting from the additional feature. Add in-line fittings to existing routes. Use keyboard shortcuts and the triad to orient and position an in-line fitting.
4 years ago
Create and use a custom route specification template using the Routing Library Manager. Specify size and schedule of pipe segments. Select pipes and elbows from the Piping and Tubing Database. Insert route components with route specification templates.
2 years ago
Automatically create a piping route between connections. You choose from one of many possible routes. You can specify that the route goes around model geometry or through reference geometry. Drag and drop flanges. Create a new piping route. Create route geometry using auto-route. View multiple route solutions. Evaluate route solutions.
1 year ago
Based on analyses result, optimize factor of safety, maximum stress or maximum displacement value to an acceptable value. Vary a dimension within the range to try to meet the requirement. Make the design leaner or reduce material cost if it meets or exceeds the factor of safety. Achieve factor of safety through optimizing design. Use built-in automation capability to optimize a model. Run simulation.
4 years ago
Use extruded, revolved, and swept surfaces to create geometry. Trim, extend, knit, and thicken the surfaces to finish the thin-walled model. Extrude a sketch to create a surface. Revolve a sketch about an axis to create a surface. Trim a surface using a sketch or another surface as the trim tool. Sweep an open profile along a path to create a surface. Combine multiple surfaces into a single body using knit surfaces. Thicken a surface body to create a solid body.
1 year ago
Create, edit and save custom routing assembly templates using an existing routing assembly template. Create and save a custom routing assembly template. Specify different drafting standards, units, and other document properties as the defaults that will be used when you create a new route with the custom template.
4 years ago
Paste or "paint" the properties of an existing feature onto other features. The features may be in the same part or a another part. Copy and paste feature properties from one feature to another.
4 months ago
Create a sheet metal part of constant wall thickness using sheet metal features. Explore the fundamentals of creating sheet metal parts using the flange method. Create a base flange in a sheet metal part. Understand the use of gauge tables and sheet metal options. Flatten a sheet metal part.
1 year ago
Learn to shorten, extend, or add corner treatments to weldment models using the Trim/Extend command. Learn to trim and extend structural members in a weldment model. Learn to optimize selections for trimming to minimize rebuild time and interference issues. Add corner treatments where two members meet in a weldment model.
1 year ago
