Change the part for the Certified SOLIDWORKS Professional sample exam by removing features, adding features, and editing existing features. Remove, add, and edit features to change the part. Obtain the mass properties of the part.
Learn how to create a part for the Certified SOLIDWORKS Professional sample exam. Create bosses, cuts, holes, fillets, and chamfers. Apply material and determine the mass properties of the part.
Learn about the segments that make up the Certified SOLIDWORKS Professional exam. Identify the three segments of the exam: Part Modeling, Configurations and Part Modifications, and Assembly Modeling. Understand that you can take each segment as many times as necessary, after a waiting period between attempts has elapsed.
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
Use both bottom-up and top-down assembly modeling design techniques to insert and modify components in an assembly. Insert components into an assembly using a bottom-up approach. Modify a component using a top-down approach. Create a new component using a top-down approach.
The linear coupler mate links the translation of one component to the translation of another component. The translation occurs along an axis you define relative to the assembly origin or a reference component. Select the faces and reference components to define a linear coupler mate. Set the ratio of motion of one component relative to another.
Constrain two similar entities (points, edges, faces, etc) to be symmetric about a plane or planar face. A symmetry mate does not force the components to be symmetric, just the entities you select. Understand the acceptable selections for a symmetry mate. Constrain two planar faces to be symmetric about a reference plane.
Bend a sheet metal part by using a line sketched on a flat portion of the sheet metal body. Bend a sheet metal part in two locations using separate sketches. Sketch bend lines.
Take advantage of selected global and local settings, techniques, and tips that can lead to faster assemblies. Examine helpful settings in System Options and Document Properties. Understand how to work with large assembly FeatureManager design trees. Learn a few tips to speed up view manipulations.
Use surfacing techniques to create custom blends where fillets produce undesireable results. Remove unwanted faces from a model using the Delete Face command. Use Face Curves and sketches to create a trimming boundaries. Trim faces to form a clean boundary for the blend. Use the Filled Surface command to create a surface tangent to all adjacent faces. Use Knit Surface to combine the surface bodies in the model. Use Thicken to transform the surfaces into solid geometry.
Use design tables to quickly create many configurations that change the suppression states of components, mates, and assembly features. Also, you can use design tables to configure the dimensions of mates and assembly features. Understand the options when creating a design table. Use data validation to restrict values entered in the design table. Set configuration properties to control new mates and components. Change the configuration of components in the assembly design table.
Create a variable radius fillet where you set the radius value at selected vertices and control points. Also, you can set the radius to zero to force the fillet to converge to a point. Create a fillet where the radius varies along the selected edge. Modify the radius value at vertices or control points. Create zero radius fillets where the fillet must converge to a point.
This lesson contains exercises so you can improve your proficiency with Additional Tools before taking the Certified SOLIDWORKS Associate (CSWA) exam. The additional tools include reference geometry, configurations, making changes to a model, and more. There are 10 practice exercises for Additional Tools so this is the second of two lessons containing these exercises.
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
Learn the best practices for creating sweep profile sketches. Add relationships between the profile sketch entities and the guide curves. Create sketch relations that ensure the correct shape of the profile along the entire path. Set up the path and guide curves before creating the profile sketch. Add pierce relations between the guide curves and the profile sketch. Create a sweep feature with guide curves. Use perpendicular and parallel relations to define the sweep profile.
Connect existing components using orthogonal tubes and standard fittings from the library. Use the Auto Route feature to automatically generate routes Add standard fittings to assemblies. Create orthogonal routes between features.
Analyze different regions of a part to identify which portions of the part are at the target thickness, and assess which regions may lead to issues when creating a mold. Learn to use Thickness Analysis to display regions of a part are that are not at the target thickness. Save and view a Thickness Analysis report.
Compare opening an assembly using each of the three assembly modes: Resolved, Lightweight, and Large Design Review. Discover the differences between each mode. Examine the best use for each mode and how to use them. Understand the options when switching between modes.
Add materials to parts for calculations of mass properties, for use with SOLIDWORKS Simulation, and to modify the appearance of the part. Define the material for a part. Add a custom material to a part. Use configurations to assign different materials to a part.
Use standard mates to constrain the degrees of freedom of components relative to other components or reference geometry such as planes or axes. Learn about standard mate types such as coincident, concentric, and more. Understand how selected entities such as faces, edges, vertices, planes, or axes determines the available mate types.
Create a pattern of one or more features or bodies in one or two circular directions. The circular direction is based on a cylindrical or conical face, a circular or linear edge, centerline or axis. Spacing of instances can be controlled in different ways. Create circular patterns of existing features. Vary spacing and range.
Insert a reducing outlet tee into an existing route and orient it using keyboard shortcuts and a triad. Use the Auto Route tool to connect the pipes resulting from the additional feature. Add in-line fittings to existing routes. Use keyboard shortcuts and the triad to orient and position an in-line fitting.
