Use the various Mold Tools to prepare a part for injection molding, including scaling, split line, parting surface, and shut-off surfaces. After preparing the part, you create the core and cavity. Identifty the parting plane. Create a parting surface. Create shut-off surfaces. Create mold body, core and cavity.
Generate a Bill of Characteristics: Manually or automatically extract annotations. Leverage the SOLIDWORKS Inspection Addin or Standalone application based on your workflow.
Introduction to SOLIDWORKS Inspection: Create an inspection project and bill of characteristics. Export and generate an inspection report. Leverage the SOLIDWORKS Inspection Addin and Standalone application
Use the rules panel to link the captured models to the forms you created for data entry. Utilize logic and math operators to define the rules. Drive the output model and drawing by entering parameters into the form.
Insert annotations into existing drawing views, including custom notes, geometric tolerances, and blocks. Create annotations and symbols. Create blocks from geometry and notes. Save a block to a file. Insert a block into a drawing.
Create the first part for the assembly portion of the Certified SOLIDWORKS Professional sample exam. Create a part for the assembly using the views and dimensions on a drawing. Obtain the center of mass of the part based on a reference coordinate system.
Select components according to their position relative to assembly envelopes and hide, suppress, or delete the selected components. Utilize assembly envelopes as reference components that are ignored by bills of materials and mass property calculations. Convert components to assembly envelopes. Select components based on their position relative to an assembly envelope. Hide or show components selected using an assembly envelope.
Large Design Review mode offers faster performance and enhanced visual features while limiting access to details of constituent parts and subassemblies. Large Design Review mode is ideal for visual presentations, rough measurements, and section views. Open an assembly in Large Design Review mode. Review the available tools and features in Large Design Review mode. Explore the limitations of Large Design Review mode.
The linear coupler mate links the translation of one component to the translation of another component. The translation occurs along an axis you define relative to the assembly origin or a reference component. Select the faces and reference components to define a linear coupler mate. Set the ratio of motion of one component relative to another.
Constrain a point or a vertex of a component to a path in an assembly. Then, control the pitch, yaw, and roll of the component as it moves along the path. Specify the entities for a path mate. Edit a path mate to control pitch, yaw, and roll of the component.
Center a component relative to two faces of a groove using a width mate. Add a width mate to center a component relative to two faces of another component. Understand the degrees of freedom that are constrained by a width mate.
Define mated entities and mate types for components that you use frequently. When you add the component to the assembly, some mates can automatically be added for you. Define the mate entities and mate types for a frequently used component. Add a component with mate references to an assembly. Select the configuration of a component that you drag into an assembly.
The Belt/Chain assembly feature links idlers, pulleys, or sprockets together to achieve the intended rotation of several components simultaneously. Optionally, you can create a belt or chain component part. Select edges of pulleys and idlers for a belt/chain assembly feature. Set the properties of a belt/chain assembly feature.
The Hole Series feature adds holes to multiple components in an assembly. Unlike a typical assembly feature, the Hole Series adds part-level features to the individual components. Create a Hole Series feature in an assembly. Create a Hole Series feature from an existing hole feature. Understand the difference between the Hole Series feature and a typical assembly feature.
Import parts into SOLIDWORKS, then use the rip feature to create thin cuts in sheet metal geometry between adjacent flanges. Insert bends to convert the model to a sheet metal part to flatten and further edit the part. Import other file types into SOLIDWORKS. Use rip feature to create thin cuts. Add bends to part to convert part to sheet metal.
Split a straddle face into two faces along a parting line. Analyze the part with respect to the direction of pull of the mold to determine the best location for the parting line. Use ths Split Line tool to create the parting line.
Create a side core with draft from sketches on molds with trapped molding areas. Use feature freeze bar to exclude features from being rebuilt. Create side cores on molds. Exclude features from being rebuilt.
Lock the focus on a drawing view so it remains active while you work within that view. Add sketch entities and annotations to a view that has the focus locked on it.
Create a note with text that is linked to existing dimensions and custom properties. Link a note to a dimension. Edit the title block of a drawing to add notes linked to a model's properties. Add drawing property information to populate a title block.
Create several types of derived drawing views and understand the unique characteristics of each view type. A derived drawing view is created by referencing an existing drawing view. Create a projected view by folding off an existing drawing view. Project a view normal to a selected edge to create an auxiliary view. Show a portion of a view at an enlarged scale using detail views. Create a drawing view relative to planes or planar faces in the model. Focus on a portion of a drawing view by cropping and hiding the unwanted entities. Shorten an existing drawing view using broken views.
Use drawing view commands that are specific to working with assembly models including broken out section views, alternate position views, and exploded views. Use drawing view properties to represent assembly configurations. Create a broken-out section view to show internal components of the assembly. Create an alternate position view using an existing or a new configuration. Create an exploded assembly drawing view.
Change the part for the Certified SOLIDWORKS Professional sample exam by removing features, adding features, and editing existing features. Remove, add, and edit features to change the part. Obtain the mass properties of the part.
Use both bottom-up and top-down assembly modeling design techniques to insert and modify components in an assembly. Insert components into an assembly using a bottom-up approach. Modify a component using a top-down approach. Create a new component using a top-down approach.
