Create a spring using a sweep feature defined in the context of an assembly. Then, animate the spring by adding a linear motor in MotionManager. Create an animation. Model a spring using an in-context sweep. Add a linear motor to stretch and compress the spring. Understand the impact of rebuild errors on animations.
Identify, add, and modify configurations in the part for the Certified SOLIDWORKS Professional sample exam. Modify configurations as indicated in the sample example. Obtain the mass properties of the part.
Update the parameters that control the overall shape and size of the part for the Certified SOLIDWORKS Professional sample exam. Manual edit individual dimensions and globally change the values of variables. Rebuild the model to ensure that all features update correctly.
Contour selection options allow individual contours to be selected within a sketch. By making use of contour selection techniques, a single sketch can be used to produce multiple features. Use the Contour Select Tool to pre-select contours for a feature. Use the Selected Contours options for a feature to define areas of a sketch to use. Use a single sketch to generate multiple features. Understand the icons displayed when using selected contours and sharing sketches.
Use design tables to quickly create many configurations that change the values of dimensions and the suppression states of features. Set up a model to effectively use design tables. Understand the options when creating a design table. Add columns to a design table for additional dimensions and features to control. Add rows to a design table for additional configurations to create.
Break a part into multiple solid bodies using sketches, faces, planes, or surfaces. Split a single bodied part into multiple solid bodies. Save each solid body as a new part. Modify the new parts.
This lesson contains exercises so you can improve your proficiency with Features and Parts before taking the Certified SOLIDWORKS Associate (CSWA) exam. There are 12 practice exercises for Features and Parts so this is the first of two lessons containing these exercises.
Modify configurations in the part for the Certified SOLIDWORKS Professional sample exam. Change the suppression state of features and adjust dimensions in specific configurations. Obtain the mass properties of the part.
Change the part for the Certified SOLIDWORKS Professional sample exam by removing features, adding features, and editing existing features. Remove, add, and edit features to change the part. Obtain the mass properties of the part.
Learn how to create a part for the Certified SOLIDWORKS Professional sample exam. Create bosses, cuts, holes, fillets, and chamfers. Apply material and determine the mass properties of the part.
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
Use surfacing techniques to create custom blends where fillets produce undesireable results. Remove unwanted faces from a model using the Delete Face command. Use Face Curves and sketches to create a trimming boundaries. Trim faces to form a clean boundary for the blend. Use the Filled Surface command to create a surface tangent to all adjacent faces. Use Knit Surface to combine the surface bodies in the model. Use Thicken to transform the surfaces into solid geometry.
Create a variable radius fillet where you set the radius value at selected vertices and control points. Also, you can set the radius to zero to force the fillet to converge to a point. Create a fillet where the radius varies along the selected edge. Modify the radius value at vertices or control points. Create zero radius fillets where the fillet must converge to a point.
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
Learn the best practices for creating sweep profile sketches. Add relationships between the profile sketch entities and the guide curves. Create sketch relations that ensure the correct shape of the profile along the entire path. Set up the path and guide curves before creating the profile sketch. Add pierce relations between the guide curves and the profile sketch. Create a sweep feature with guide curves. Use perpendicular and parallel relations to define the sweep profile.
Use the various Mold Tools to prepare a part for injection molding, including scaling, split line, parting surface, and shut-off surfaces. After preparing the part, you create the core and cavity. Identifty the parting plane. Create a parting surface. Create shut-off surfaces. Create mold body, core and cavity.
Use extruded, revolved, and swept surfaces to create geometry. Trim, extend, knit, and thicken the surfaces to finish the thin-walled model. Extrude a sketch to create a surface. Revolve a sketch about an axis to create a surface. Trim a surface using a sketch or another surface as the trim tool. Sweep an open profile along a path to create a surface. Combine multiple surfaces into a single body using knit surfaces. Thicken a surface body to create a solid body.
Paste or \"paint\" the properties of an existing feature onto other features. The features may be in the same part or a another part. Copy and paste feature properties from one feature to another.
Use Volume features to recognize geometry that does not match any other feature type. The volume feature can be replaced with a standard SOLIDWORKS feature. Recognize volume features. Recognize boss and cut revolve features. Use the Up To Face option with cut extrudes. Replace volume features with standard cut features. Edit the mapped features.
Control the conversion of imported part geometry into a SOLIDWORKS feature-based parametric model by converting specific features interactively. Interactively convert feature types. Convert features types that cannot be used with automated methods. Recognize multiple similar features at the same time. Re-recognize geometry and change it to a different type. Add patterns from the list of recognized features.
Create an intersect feature to represent the fluid inside a bottle. Then, use the mass properties tool to determine the volume of the feature you created. Create a configuration to represent the liquid in the bottle. Create a reference plane to represent the fill level of the bottle. Use an intersect feature to model the liquid inside a bottle. Use mass properties to determine the volume of a solid body.
Explore the differences between solid and surface bodies and learn why surface modeling can be a solution to challenging modeling tasks. Understand the difference between a surface and solid body in SOLIDWORKS. Learn why surface modeling should be used.
