Add each of the six mechanical mate types to control the degrees of freedom of components when designing mechanisms. Mate a cylinder, plane, or point to a series of tangent faces with a cam follower mate. Limit the rotational movement between two components with a hinge mate. Move one component linearly to move another component rotationally with a rack and pinion mate. Add a pitch relation between the rotation of one component and the translation of another with a screw mate. Rotate two components relative to one another with a gear mate or a universal joint mate.
Replace one component with another in an assembly. Replace selected instances of a component in an assembly with a new part. Optionally, re-attach mates to simplify the insertion of the replacement component.
Insert annotations into existing drawing views, including custom notes, geometric tolerances, and blocks. Create annotations and symbols. Create blocks from geometry and notes. Save a block to a file. Insert a block into a drawing.
Create basic, aligned, offset, and partial or half-section views, including scope and advanced properties. Add several types of section views to a drawing. Define section view properties. Modify section views.
Use extruded, revolved, and swept surfaces to create geometry. Trim, extend, knit, and thicken the surfaces to finish the thin-walled model. Extrude a sketch to create a surface. Revolve a sketch about an axis to create a surface. Trim a surface using a sketch or another surface as the trim tool. Sweep an open profile along a path to create a surface. Combine multiple surfaces into a single body using knit surfaces. Thicken a surface body to create a solid body.
Use several direct editing techniques for working with imported geometry using surfacing tools. Explore the Delete Face tool, the Delete Hole command, and the Untrim Surface tool. Use the Delete Face tool to remove an unwanted imported geometry feature. Use Delete Hole and Untrim Surface to remove an unwanted imported geometry feature. Convert a surface body into a solid body using the Thicken command.
Create a sheet metal part of constant wall thickness using sheet metal features. Explore the fundamentals of creating sheet metal parts using the flange method. Create a base flange in a sheet metal part. Understand the use of gauge tables and sheet metal options. Flatten a sheet metal part.
Explore the Miter Flange feature, including sketching the profile, edge selection, and other pertinent options. Create a miter flange. Learn and understand the different options for miter flange.
Create a weldment frame from a series of layout sketches. The weldment environment uses standard weldment profiles to define the type of structural members in the weldment. Members of the same type and size are created in one feature. Create a weldment frame. Insert structural members. Relocate the profile sketch. Change corner treatments.
Demonstrating how to log into vaults using the Windows Explorer interface as well as the SOLIDWORKS PDM Task Bar Item icon. Log into multiple vaults using the same log in credentials. Log into multiple vaults using different log in credentials. Log of off vaults. Set up automatic log in functionalities when signing into a Windows user profile.
Demonstrate the navigation of the vault within the Windows Explorer interface. Locating the SOLIDWORKS PDM tools. Opening files from the vault.
Learn which files are contained in a specific folder and where they are used.
Demonstrate how to submit a document for approval. Sending through a workflow from the Under Change state to Change Pending Approval. Demonstrate how to send a notification to a specific approver with comments included. Log into the vault as an approver and demonstrate how to approve a document.
Hollow out solid bodies using the Shell feature. Apply different wall thicknesses to selected faces. Select multiple faces to be removed in the shelling operation. Understand how the shelling operation affects filleted and rounded edges.
Use minimal sketch geometry to create rib features that reinforce thin walled parts. Understand the various options for creating a Rib feature. Use simple and complex sketches to create rib features.
Model parts in the context of an assembly, using references to other components to complete the design. The design intent for new parts (sizes of features, placement of components in the assembly, etc.) comes from other components in the assembly. Build a virtual part in the context of an assembly by employing Top-Down assembly modeling techniques. Create features in the assembly context by referencing geometry in mating parts. Understand InPlace mates and external references. Identify external references in the FeatureManager design tree.
Explore the part modeling portion of the CSWA exam. Review the techniques used to model the part in the sample CSWA exam. Review the sample CSWA exam.
A structural member profile is a cross-section of a beam, tube, channel, or other structural member type. Sweeping this profile along segments of a layout sketch creates the structural member\'s geometry. There are full collections of profiles and sizes available for download, and it is also possible to create customized profiles. Learn how to access the additional content for standard structural member profile sizes. Create a custom weldment profile by saving a sketch as a Library Feature Part. Use the Structural Member command to create a structural member from a structural member profile. Use the Locate Profile option to choose a sketch point for aligning a structural member.
Discuss the three SOLIDWORKS PDM client types to distinguish them from one another. Editor Can work with all file types CAD Add-Ins Contributor Can work with all file types Add-Ins are not enabled Viewer Read-only access within the vault Cannot add or modify files
Make modifications to a file using Window Explorer to check the file in and out. Check a file out of the vault. Check a file in the vault.
Learn the file history tool. Access an early version of a part. Access the latest version of a part.
Demonstrate the creation of a reference between a newly created MS Word file and an assembly. Remove the reference using the custom references functionality.
Demonstrate the use of the SOLIDWORKS PDM Search tools. Discuss the three search tools: Quick Search, Embedded Search and the Search Tool. Quickly find files using Quick Search. Understand how to use the embedded search tool.
