Connect existing components using orthogonal tubes and standard fittings from the library. Use the Auto Route feature to automatically generate routes Add standard fittings to assemblies. Create orthogonal routes between features.
Lesson
3 years ago
ENG
JPN
Understand how to start routing and how the route subassembly organizes and stores the components of a route. Enable the Routing add-in. Locate the Piping, Tubing and Electrical menus. Understand a routing subassembly. Identify routing library components. Use the routing library manager to load settings.
Lesson
3 years ago
ENG
JPN
Blocks group sketch entities and dimensions together so that they move as one in a sketch. Together with a layout sketch, you can go directly from an assembly sketch to the full assembly. Create, edit and save blocks. Create a layout sketch of an assembly using blocks. Build assembly components based on the existing blocks.
Lesson
2 years ago
ENG
JPN
Edit a pipe route relative to the pipe\'s geometry (either centerline or external surface). Coverings can also be added to pipes. Create a route relative to an existing surface. Add coverings to pipes. Change where dimensions are assigned relative to the pipe (centerline or external surface).
Lesson
2 years ago
ENG
JPN
Explore the basic concepts of creating an animation in SOLIDWORKS. Use the Animation Wizard and MotionManager to create animations that rotate, explode, and collapse an assembly. Create an animation. Explore the MotionManager pane. Use the Animation Wizard to rotate, explode, and collapse an assembly.
Lesson
2 years ago
ENG
JPN
Create exploded views in multibody parts using some of the same tools that you use to create an exploded view in an assembly. Toggle between exploded and collapsed states. Edit the explode steps. Create more than one exploded view per configuration.
Lesson
2 years ago
ENG
JPN
Use selection tools to select one or more components in an assembly. Selection tools simplify the selection of components with similar properties or components in proximity to one another. Select components by dragging a box. Select components using a volume. Isolate components. Select components using conditions such as hidden, mated, or internal.
Lesson
2 years ago
ENG
JPN
Create display states to control the visibility and display style of components. Display states can be linked to configurations of an assembly. Display states can control hide/show state, display mode, appearance, and transparency of components. Add display states to an assembly. Modify visual properties of components with display states. Explore component selection techniques. Use the display pane. Open an assembly to a specific configuration and display state. Link display states to configurations.
Lesson
2 years ago
ENG
JPN
Smart Mates can be used to automate mates while adding a component to an assembly as well as for mating existing components. Different mate relations can be created based on the geometry that is specified for the Smart Mate. Automate mates while adding a component to an assembly. Use Smart Mates to mate existing components. Use Smart Mates with circular edges to generate multiple mates simultaneously.
Lesson
2 years ago
ENG
JPN
Apply color, material and texture appearances to components, part features, or faces in an assembly. Control how those appearances propagate through the model. Appearances applied at the assembly component level do not affect the individual part file. Apply an appearance to several componets in an assembly. Apply a material appearance and change how it is displayed. Understand the hierarchy of appearance application in an assembly.
Lesson
2 years ago
ENG
JPN
Use multiple mate mode within the Mate command as a shortcut to create many mate relations to one common reference. Create multiple mates to a common reference using multiple mate mode. Toggle alignment of mates. Explore different techniques to edit mate features.
Lesson
2 years ago
ENG
JPN
Use limit mates to restrict the movement of components within a specified range of linear or angular values. Add coincident and limit mates to restrict the degrees of freedom of a component. Set the starting, minimum, and maximum values for a limit mate.
Lesson
2 years ago
ENG
JPN
Constrain two similar entities (points, edges, faces, etc) to be symmetric about a plane or planar face. A symmetry mate does not force the components to be symmetric, just the entities you select. Understand the acceptable selections for a symmetry mate. Constrain two planar faces to be symmetric about a reference plane.
Lesson
2 years ago
ENG
JPN
Use global variables and equations in assemblies to control dimensions of components or values of mates. Set dimension names. Define global variables. Add equations that link dimension values of one component to values in another component.
Lesson
2 years ago
ENG
JPN
A SpeedPak configuration improves performance of large assemblies by simplifying the assembly without losing its file references. Create SpeedPak configurations. Use SpeedPak configurations in higher level assemblies. Understand the benefits and limitations of using a SpeedPak configuration.
Lesson
2 years ago
ENG
JPN
Use drawing view commands that are specific to working with assembly models including broken out section views, alternate position views, and exploded views. Use drawing view properties to represent assembly configurations. Create a broken-out section view to show internal components of the assembly. Create an alternate position view using an existing or a new configuration. Create an exploded assembly drawing view.
Lesson
2 years ago
ENG
JPN
Use the Tooling Split command to create interlock surfaces around the perimeter of the parting surfaces to create mold tooling. Save mold bodies and create assemblies of molds. Create assembly files for mold from part files. Create exploded assembly view of mold. Create interlocking surfaces on molds using the tooling split command.
Lesson
2 years ago
ENG
JPN
The Hole Series feature adds holes to multiple components in an assembly. Unlike a typical assembly feature, the Hole Series adds part-level features to the individual components. Create a Hole Series feature in an assembly. Create a Hole Series feature from an existing hole feature. Understand the difference between the Hole Series feature and a typical assembly feature.
Lesson
1 year ago
ENG
JPN
The Belt/Chain assembly feature links idlers, pulleys, or sprockets together to achieve the intended rotation of several components simultaneously. Optionally, you can create a belt or chain component part. Select edges of pulleys and idlers for a belt/chain assembly feature. Set the properties of a belt/chain assembly feature.
Lesson
1 year ago
ENG
JPN
The Copy with Mates command copies existing components along with their mates. New references can be selected for the new mates to allow for modified placement. Use the Copy with Mates command to create new instances of components along with their mates. Understand when mate references for the copied mates are repeated. Understand when some of the copied mates require new mate references.
Lesson
1 year ago
ENG
JPN
Define mated entities and mate types for components that you use frequently. When you add the component to the assembly, some mates can automatically be added for you. Define the mate entities and mate types for a frequently used component. Add a component with mate references to an assembly. Select the configuration of a component that you drag into an assembly.
Lesson
1 year ago
ENG
JPN
Center a component relative to two faces of a groove using a width mate. Add a width mate to center a component relative to two faces of another component. Understand the degrees of freedom that are constrained by a width mate.
Lesson
1 year ago
ENG
JPN
Constrain a point or a vertex of a component to a path in an assembly. Then, control the pitch, yaw, and roll of the component as it moves along the path. Specify the entities for a path mate. Edit a path mate to control pitch, yaw, and roll of the component.
Lesson
1 year ago
ENG
JPN
The linear coupler mate links the translation of one component to the translation of another component. The translation occurs along an axis you define relative to the assembly origin or a reference component. Select the faces and reference components to define a linear coupler mate. Set the ratio of motion of one component relative to another.
Lesson
1 year ago
ENG
JPN