See how to import an assembly into SOLIDWORKS Treehouse, then make modifications to the assembly. Edit the custom properties, quantities, and suppression state of components in an assembly. Add a sub-assembly and parts to an assembly in SOLIDWORKS Treehouse. Open assemblies in SOLIDWORKS and review the modifications made in SOLIDWORKS Treehouse.
Lesson
2 years ago
ENG
Replace one component with another in the assembly for the Certified SOLIDWORKS Professional sample exam. Replace the instances of a component in an assembly with a new part. Re-attach mates to the replacement component.
Lesson
2 years ago
ENG
Connect existing components using orthogonal tubes and standard fittings from the library. Use the Auto Route feature to automatically generate routes Add standard fittings to assemblies. Create orthogonal routes between features.
Lesson
2 years ago
ENG
JPN
Identify interfering components and adjust mates to repair the assembly for the Certified SOLIDWORKS Professional sample exam. Find the center of mass of an assembly relative to a coordinate system. Insert and mate a new component. Use the Interference Detection tool to identify interferences between components.
Lesson
1 year ago
ENG
Use bill of materials (BOM) tables to call out the components of an assembly. Bill of materials can be modified in many ways and new table templates can be generated to save customizations. Tabulated bill of materials can list information about multiple configurations within the same table. Create a bill of materials for an assembly. Modify a bill of materials table to add and reorder column. Save a bill of materials as a template. Create a tabulated bill of materials.
Lesson
1 year ago
ENG
JPN
Understand how to start routing and how the route subassembly organizes and stores the components of a route. Enable the Routing add-in. Locate the Piping, Tubing and Electrical menus. Understand a routing subassembly. Identify routing library components. Use the routing library manager to load settings.
Lesson
1 year ago
ENG
JPN
Create and insert a subassembly into the assembly for the Certified SOLIDWORKS Professional sample exam. Download, insert, and mate components in a subassembly. Change the subassembly from rigid to flexible to move components.
Lesson
1 year ago
ENG
Create a spring using a sweep feature defined in the context of an assembly. Then, animate the spring by adding a linear motor in MotionManager. Create an animation. Model a spring using an in-context sweep. Add a linear motor to stretch and compress the spring. Understand the impact of rebuild errors on animations.
Lesson
1 year ago
ENG
JPN
Blocks group sketch entities and dimensions together so that they move as one in a sketch. Together with a layout sketch, you can go directly from an assembly sketch to the full assembly. Create, edit and save blocks. Create a layout sketch of an assembly using blocks. Build assembly components based on the existing blocks.
Lesson
8 months ago
ENG
JPN
Mirror Component creates opposite-hand, but otherwise identical, versions of parts or subassembies. Specify which components are mirrored and which are purely copied (i.e. fasteners, which should not be mirrored). The geometry of a mirrored component changes to create a truly mirrored version, known as an \"opposite-hand\" version. Mirror components about an assembly plane. Create mirrored versions of parts in an assembly. Create opposite-hand versions of parts.
Lesson
8 months ago
ENG
JPN
Model parts in the context of an assembly, using references to other components to complete the design. The design intent for new parts (sizes of features, placement of components in the assembly, etc.) comes from other components in the assembly. Build a virtual part in the context of an assembly by employing Top-Down assembly modeling techniques. Create features in the assembly context by referencing geometry in mating parts. Understand InPlace mates and external references. Identify external references in the FeatureManager design tree.
Lesson
8 months ago
ENG
JPN
Automatically create a piping route between connections. You choose from one of many possible routes. You can specify that the route goes around model geometry or through reference geometry. Drag and drop flanges. Create a new piping route. Create route geometry using auto-route. View multiple route solutions. Evaluate route solutions.
Lesson
8 months ago
ENG
JPN
Edit a pipe route relative to the pipe\'s geometry (either centerline or external surface). Coverings can also be added to pipes. Create a route relative to an existing surface. Add coverings to pipes. Change where dimensions are assigned relative to the pipe (centerline or external surface).
Lesson
8 months ago
ENG
JPN
Make changes to route geometry using 3D sketches. Edit routes by deleting, trimming, and adding sketch geometry. Delete existing fittings and add replacements fittings. Edit existing routes. Delete existing fittings. Add replacement fittings.
Lesson
8 months ago
ENG
JPN
Create flexible tubing routes between existing components in an assembly. Edit tubing routes to accomodate tubing clips and cylindrical envelopes. Use the Repair Route command and the Re-route Spline option to resolve any errors. Create flexible tube routes. Edit routes using tubing clips and envelopes.
Lesson
8 months ago
ENG
JPN
Explore the user interface of SOLIDWORKS Treehouse, an assembly structure planning tool for managers and designers alike. Tour the user interface to explore how to use SOLIDWORKS Treehouse. Build the structure for a new assembly complete with parts and drawings.
Lesson
8 months ago
ENG
Explore the basic concepts of creating an animation in SOLIDWORKS. Use the Animation Wizard and MotionManager to create animations that rotate, explode, and collapse an assembly. Create an animation. Explore the MotionManager pane. Use the Animation Wizard to rotate, explode, and collapse an assembly.
Lesson
6 months ago
ENG
JPN
Create exploded views in multibody parts using some of the same tools that you use to create an exploded view in an assembly. Toggle between exploded and collapsed states. Edit the explode steps. Create more than one exploded view per configuration.
Lesson
6 months ago
ENG
JPN
Use selection tools to select one or more components in an assembly. Selection tools simplify the selection of components with similar properties or components in proximity to one another. Select components by dragging a box. Select components using a volume. Isolate components. Select components using conditions such as hidden, mated, or internal.
Lesson
6 months ago
ENG
JPN
Create display states to control the visibility and display style of components. Display states can be linked to configurations of an assembly. Display states can control hide/show state, display mode, appearance, and transparency of components. Add display states to an assembly. Modify visual properties of components with display states. Explore component selection techniques. Use the display pane. Open an assembly to a specific configuration and display state. Link display states to configurations.
Lesson
6 months ago
ENG
JPN
The Hole Series feature adds holes to multiple components in an assembly. Unlike a typical assembly feature, the Hole Series adds part-level features to the individual components. Create a Hole Series feature in an assembly. Create a Hole Series feature from an existing hole feature. Understand the difference between the Hole Series feature and a typical assembly feature.
Lesson
6 months ago
ENG
JPN
Smart Mates can be used to automate mates while adding a component to an assembly as well as for mating existing components. Different mate relations can be created based on the geometry that is specified for the Smart Mate. Automate mates while adding a component to an assembly. Use Smart Mates to mate existing components. Use Smart Mates with circular edges to generate multiple mates simultaneously.
Lesson
6 months ago
ENG
JPN
Apply color, material and texture appearances to components, part features, or faces in an assembly. Control how those appearances propagate through the model. Appearances applied at the assembly component level do not affect the individual part file. Apply an appearance to several componets in an assembly. Apply a material appearance and change how it is displayed. Understand the hierarchy of appearance application in an assembly.
Lesson
6 months ago
ENG
JPN
The Belt/Chain assembly feature links idlers, pulleys, or sprockets together to achieve the intended rotation of several components simultaneously. Optionally, you can create a belt or chain component part. Select edges of pulleys and idlers for a belt/chain assembly feature. Set the properties of a belt/chain assembly feature.
Lesson
6 months ago
ENG
JPN