Is there a way to have a predefined view in a template dwgthat will automatically grab the flat pattern view of a sheet metalpart? thanks.SolidworksDrawings And Detailing
15 年 前
They're not exactly identical. The volume is only 0.04 inches off in the mass properties. Is that a big deal? I did notice a few needed changes to my drawings from this.
6 年 前
Here's a gem. Made me look like an idiot in front of a few people. Thanks. Makes you think twice about just sending drawings, doesn't it?
13 年 前
Hi Everyone, Just a Simple question i have a solidworks premium and the eDrawings came free with it, Can I transfer my eDrawings Professional Licence to another system. I want to keep solidworks in the current system an eDrawings in the another system. Sumit Rana SolidworksDrawings And Detailing
5 年 前
hi, Although after making changes in setting in options which isavailable after save as *.dwg, my text style changes from RomanS tosldtxt. although this font is available in autocad too. In later case i have to individually select all the text andchange its text style from sldtxt to RomanS. how to avoid this activity and get direct results... PleasesuggestSolidworksDrawings And Detailing
14 年 前
Hi, Got annoyed that I couldn't easily draw arrows in a SW drawing so I converted my AutoCAD arrow blocks into SW ones. Figured other people might find them useful. They're originally for representing forces etc in hand calc figs so there are some odder blocks that might not be of the immediate use. SolidworksDrawings And Detailing
6 年 前
do you have to have a separate drawing template for landscapesheet formats?SolidworksDrawings And Detailing
15 年 前
why isn't pack and go not grabbing the lower level drawings when i pack and go from the top level drawing of an assembly? i have drawings made for the parts in this assembly, yet pack and go doesn't see them? anyone have this issue? SolidworksDrawings And Detailing
4 年 前
Hi, I need to show GD & T frame, below line. Can Anybody help me in doing this. Please refer the image attached. Thanks, Dushyant SW 2007 SP4.0 XP SP 2.0 SolidworksDrawings And Detailing
14 年 前
I created a drawing template. However, when I add the 2ndpage, the sheet format is not as the same as the 1st page. Anything wrong during my template creation or I need to manuallychange it? thanks.SolidworksDrawings And Detailing
14 年 前
Hello everyone, I am a new member so I apologize if this post is in a wrong place. So I am working on this part but I did something wrong and now it's reversed in terms of hollow and solid parts. Now if I use extrude boss it will extrude the hollow parts instead. How do I reverse it?
4 年 前
Hi folks, in Brazil, we have a standard demands the angle of dimensions arrow being 15º. Is there a way to change it without using trigonometry all the time I have to change its dimensions? SolidworksDrawings And Detailing
4 年 前
Once you're in autonumber, and it autonumbers the second line of your note which you don't want because you're just wrapping the text down a line, how do you start autonumbering again? SolidworksDrawings And Detailing
10 年 前
Hello, When I open an old drawing or I make a new one on SolidWorks 2020 I cannot see the number in the dimension nor the numbers in the information table in the bottom. When I print the doc in pdf it appears! I verified the layer and the display status without any result. I believe is a bug at some level...
3 年 前
If anyone is ever looking for something fun to model in their spare time, I just learned about this great repository of drawings of Apple products: https://developer.apple.com/resources/cases/ Enjoy! SolidworksDrawings And Detailing
12 年 前
Hi I want to place a series of anglar dims in a drawing, all will beconcentric, like anglar ordinate dims. How do I place the text sothat all is readable from the center of the pitch circle, not thebottom right of the sheet? Sw rotates the text after I get 90 deg around and flicks it backafter 270 deg all so it is readable from the bottom right. SolidworksDrawings And Detailing
15 年 前
I want to dimension from the end of the circle to the edge ofthe part, how can I do it. Currently it pick the dimension from thecenter of the circle to the edge. Any help will be appreciated BikSolidworksDrawings And Detailing
15 年 前
i am not able to access standard drawing sheets in sw09student. is it a problem with installation or something addition ineed to do?SolidworksDrawings And Detailing
14 年 前
Ladies and gentlemen, help a friend, please. I need to supress some not top level item just in a specific configurations I have created. I tried to do it selecting the items, going to Edit > Suppress > This configuration but when I will check the items its was supress in all configurations. I just could suppress items in this way when the item was top level items.
4 年 前
SolidWorks 2020 SP 4.0 Is anybody having an issue where the scale shown in a drawing view's properties is high by an order-of-magnitude? In the example below, the actual scale is 1:5. If I clear that 1:50 and enter 1:5, the scale does not change (meaning: the view on the sheet does not grow or shrink). Thanks for any help.
3 年 前
Quick question, how can I cut the tube in the picture shown below... SolidworksDrawings And Detailing
6 年 前
I am trying to add dimension to attached 3d model. As you can see in the snapshot, I cant access the dimXpert, it is not active, I am fairly new to Solidworks. SolidworksDrawings And Detailing
3 年 前
Is it possible to show hidden lines in a shaded view?SolidworksDrawings And Detailing
14 年 前
i using excel base boms in solidworks and i link the data to another excel file (fileA) (copy&paste link). once i reopen the fileA, it display like this and cannot be resolved. How to solve this. plz help me i using microsoft office 2019, solidworks 2019 SolidworksDrawings And Detailing
4 年 前
