Novedades de

Foro de usuarios de SOLIDWORKS

Donde los usuarios de SOLIDWORKS descubren, interactuan y comparten información sobre 3DEXPERIENCE Works y SOLIDWORKS para escritorio, con conexión a la nube o completamente en la nube.

Inicie sesión con el ID de 3DEXPERIENCE.

How do you split an existing edge in #SOLIDWORKS? This is a critical skill for surface modeling when working with imported geometry. This is one way to do it: https://youtu.be/XpMUFwki6XY What is your technique? step Surfacing Surfaces loft boundary
SOLIDWORKS User Forum
6 meses hace
Hi, I have a surface that I would like to thicken, however I need the thickness to be non uniform. Ideally i'm looking for a way of imposing a sort of grey scale map onto the surface and create a thickness using it. Is there a way to do this or another way that would achieve the same thing. The surface I need to thicken is a very organic shape to start with.
SOLIDWORKS User Forum
3 años hace
Hello, I am having a hard times modeling this case with a sharp line around the corners. I have been using the tool " boundary surface " with sketches in both directions. Let me know if that's something someone can help me with. Thanks in advance, Celia SolidworksSurfacing
SOLIDWORKS User Forum
3 años hace
Hi I'm not able to knit all surfaces together because of Boundary-Surface 53,54 and 55 and even the spoilers. Spoilers is overlapping the surface so that makes sense but I don't know whats wrong with 53,54 and 55. Everything else seems fine. Please help! SolidworksSurfacing
SOLIDWORKS User Forum
3 años hace
Hi How can I "extrude" the splitline in this model? (The split line feature is towards the end in feature manager bar) SolidworksSurfacing
SOLIDWORKS User Forum
3 años hace
I do the surface-loft them I do the cut with surface and it fails due to geometric condition. I did a similar model before and it worked so I dont know the reason its failing. Part2 worked fine Part3_3 did not work. SolidworksSurfacing
SOLIDWORKS User Forum
3 años hace
Hi all, I tried the like Measure, Section properties & Mass properties to find the surface area of the body. I couldn't able to get a one-click answer. So, later I calculated individually(or two surfaces) to find all areas of the surface. SolidworksSurfacing
SOLIDWORKS User Forum
4 años hace
Hello Gentlemen / Ladies question? has experience in surface modeling using POWER SURFACING overlays. Because I have some questions. Thank you in advance for your answer SolidworksSurfacing
SOLIDWORKS User Forum
4 años hace
Hi everyone, The surface body named Surface-Trim13 won't thicken to 2mm as needed - any suggestions would be great, thanks. File attached. SolidworksSurfacing
SOLIDWORKS User Forum
4 años hace
How to divide a sphere surface to 12 equal pentagonal ? SolidworksSurfacing
SOLIDWORKS User Forum
4 años hace
Hi! For my project I am attempting to design a plastic cover that could be injection molded. The issue I am having is adding a draft to the part. The neutral plane is at a weird angle - Using the drafting tool has not worked so far.
SOLIDWORKS User Forum
4 años hace
How to divide a sphere of equal parts? SolidworksSurfacing
SOLIDWORKS User Forum
4 años hace
Hello, I have this handle and I am trying to do an extruded cut, resulting in three cuts around the outside perimeter of it using this sketch. I should add they will only be a few millimeters deep and surround the entire handle. What method would I use to go about this? Thanks! SolidworksSurfacing
SOLIDWORKS User Forum
4 años hace
Hello, I am trying to make a simple, triangular, planar surface from the current sketch (Already done with the previous sketch). I know it's a closed sketch but the planar surface tool refuses to recognize the sketch as a feasible definition for it (aka the tool is unselectable/grayed out). Why is this happening? I attached the part file. SolidworksSurfacing
SOLIDWORKS User Forum
4 años hace
How to divide this surface area to 2 equal area like this ball model ? SolidworksSurfacing
SOLIDWORKS User Forum
4 años hace
Hi everyone! I'm Romain, new to this forum I would like to introduce you this SolidWorks tutorial I made. It aims at modeling an Aston Martin One-77. You can find it here : http://www.solidworks-aston-martin-one77.com/ This car tutorial is complete, available as PDF, you only need to know the basics of SolidWorks.
SOLIDWORKS User Forum
7 años hace
Just surfacing practice. SW2014 Files attached SolidworksSurfacing
SOLIDWORKS User Forum
8 años hace
I'm not quite sure what direction to go to complete this model the problem is this variable radius transitions that make the geometry diffucult to create. I'm close but need a little help. I may need to do some surfacing to finish it. Unfinished model attached along with dwg and jpegs of the cast part.
SOLIDWORKS User Forum
9 años hace
It has come to my attention that Mark has left SolidWorks. I advice we don't turn this into a guessing game of "why" but simply wish him the best in his future endeavours! It goes without saying that he will be missed in the SolidWorks community. Mark, maybe you'll swing by every now and then? SolidworksSurfacing
SOLIDWORKS User Forum
10 años hace
This is encouraging, it would be very handy to have an option for G2 with edge blends. Face blends to achieve this is just a hassle! http://www.tenlinks.com/news/PR/siemens_plm/100213_parasolid.htm SolidworksSurfacing
SOLIDWORKS User Forum
10 años hace
Hi, is somebody sees why extending Surface-Offset B is possible, when trying to do the same with Surface-Offset H is not ? Tx for your lighting. SolidworksSurfacing
SOLIDWORKS User Forum
11 años hace
SolidworksSurfacing
SOLIDWORKS User Forum
11 años hace
b SolidworksSurfacing
SOLIDWORKS User Forum
11 años hace
Bad News Bears. http://news.autodesk.com/news/autodesk/20111222005259/en/Autodesk-Acquires-T-Splines-Modeling-Technology-Assets I am very disappointed to hear this. We were set to purchase tsElements + T-Splines in January. Now I'm not seeing this as a good business move. SolidworksSurfacing
SOLIDWORKS User Forum
12 años hace