Novidades no

Fórum de usuários do SOLIDWORKS

Onde usuários do SOLIDWORKS aprendem, interagem e compartilham informações sobre o 3DEXPERIENCE Works - SOLIDWORKS para desktop, conectado à nuvem e totalmente na nuvem.

Faça login com o ID da 3DEXPERIENCE.

Categorias:
Ordenar:
Hi all I am having a problem searching for parts and drawingsin Explorer. Yesterday it was searching just fine now. Itssearching but only in my local c: drive. How do i change this topermanitly search from our server drive?
SOLIDWORKS User Forum
15 anos atrás
I am modeling an assembly in Simulation 2009 and I havenoticed that the mesh seems to be incompatible between the solidsand the shells, regardless of whether they're touching or I createcontact sets or I create split lines on the shell. I'm concernedthat the parts are not connected in the model, which they aresupposed to be.SolidworksSimulation
SOLIDWORKS User Forum
15 anos atrás
I need some help with getting a flat pattern of this cone. I've not done any sheet metal in SW so I'm at a complete lost as towhere to start. I've look in this forum and tried several things to no avail. Any help would be appreciated.
SOLIDWORKS User Forum
15 anos atrás
I am working on a stair assembly with a hinged handrail. thehandrail sub-assy has an angular limit mate on the hinge. I haveinserted it into the top assembly, made it flexible. It worksgreat... but then I save the assy with the handrail in the uprightposition and next time I pull it up the handrails are down. Anyideas?
SOLIDWORKS User Forum
15 anos atrás
Hi I have about 15 different configs of a part but I want to put eachone in a seperate drawing file using the config name as the drawingfile name and drawing number. Is it possible to do this and havethe configs link to the relevant drawing file when I want to openor find it. I don't want to use multiple sheets if I can help it. regards DSolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 anos atrás
hi i want to add restraints as a torsional spring in betweentwo plates which is connected in the middle with a cylinder. i wantto restrict the motion of cylinder with the help of torsionalspring. how to do this... bcoz in connectors i can only find compression & tensionspring... please help..?SolidworksSimulation
SOLIDWORKS User Forum
15 anos atrás
is there any separate study for analysis of car crashdynamics...or we can do it through drop test... please suggest where i can find the solution for this?SolidworksSimulation
SOLIDWORKS User Forum
15 anos atrás
hello ive drawn a cabinet that needs company logos down each side i put the logos on to the cabinet in photoworks which in turn putthe logo on the model and in the drawing ,but what i would like todo is print the drawing with the logo and existing dimensions butwhen i print the drawing the logo disapears johnSolidworksPhotoworks
SOLIDWORKS User Forum
15 anos atrás
Hello, Can someone tell me how to save/record an animation? I am usingPremium version 2007. I am under the configurations tab in myassembly then I right click on the "ExplView1" and the click"Animate Collapse". A dialog box appears and I can animate myassembly but the record button is always grayed out.
SOLIDWORKS User Forum
15 anos atrás
Hi all, I was wondering if anyone uses the PDM M-Files to manage theirSolidWorks data. If you have/do, how does the history feature workwith drawing/model parametrics in SolidWorks. For example, if Iwere to rev a drawing by changing some dimension, will the historyshow what that dimension was before the rev? Any input isappreciated.
SOLIDWORKS User Forum
15 anos atrás
This is possibly a cross-thread of other questions asked. Can you get SW explorer to search sub-directories? It seems as though you can tell it which folder to look and that'sas far as it will go. I have common plates and want to do a where used through the systembut it will only search in the specified locations.
SOLIDWORKS User Forum
15 anos atrás
I was provided a rile containing a few thousand XYZ pointsfor a system center line. I was able to create an XYZ curve as apart. Now that I have this, I am looking for a way to identify allof the different radii along this curve. A would also like todetermine the arc length of each radii.SolidworksApi macros
SOLIDWORKS User Forum
15 anos atrás
Hi ALL, Please help. I would like SW to open my second page drawing template when Iselect ADD SHEET on the bottom tab. I had this set up before so I know it is possible but I can'tfigure out how to do it. Thanks!
SOLIDWORKS User Forum
15 anos atrás
I am working on an application in VB .net 2008 which worksfine aside from this issue. If I have an assembly or part open,Realview on, the part needs saving (*), and I save the fileSolidWorks crashes. I can catch the FileSaveNotify events but bythat point it is too late and SW crashes anway. Anyone see anythinglike this?
SOLIDWORKS User Forum
15 anos atrás
I have a BOM with more than 26 columns when I go to save theBom as an excel BOM it errors out is there a fix for thisproblem?SolidworksEdrawings
SOLIDWORKS User Forum
15 anos atrás
How can I change the spacing around the detail view letter(on the circle of the parent view) so it isn't so close to thearrows? I can't seem to find it anywhere... Thanks! SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 anos atrás
I'd like to see the weld detail box come up in some differentfashion so it doesn't block out most of your screen while it'sopen.SolidworksUser Interface
SOLIDWORKS User Forum
15 anos atrás
Is there a list of other variables you can use with equationsbesides dimensions. I saw an equations where someone was able tocontrol the number of instances in a linear pattern with anequation. I can't find a list of all the other things that can be controlledwith equations and what the proper syntax is for each of thedifferent variable types.SolidworksAssemblies
SOLIDWORKS User Forum
15 anos atrás
Hi I want to place a series of anglar dims in a drawing, all will beconcentric, like anglar ordinate dims. How do I place the text sothat all is readable from the center of the pitch circle, not thebottom right of the sheet? Sw rotates the text after I get 90 deg around and flicks it backafter 270 deg all so it is readable from the bottom right. SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 anos atrás
I have Problem With SW 2009 is Very Slow in Performace AndTake Time for Zoming In and Out and it has many craching. If any one have any solution for this probledm Ahmed samy Design Engineer SW 2009 Sp0 X 64 Edition AMD Phenom 5Gb Of Ram ATI Radeon 2600 WINDOWS VISTA Ultimate X64 SolidworksAdministration
SOLIDWORKS User Forum
15 anos atrás
could someone do a macro to save a pdf of a solidworksdrawing every time i save? this is to save the "save as option"? i normally save the pdf,s in the same location as the solidworksdrawing. is this possible? thanks in advance.SolidworksApi macros
SOLIDWORKS User Forum
15 anos atrás
Did anybody notice that default appearances are not saving inthe part templates. I've tried numerous times to change the defaultappearance to carbon steel, even by specifying the material, but myfeature appearances keep turning back to plastic. My VAR said there is an SPR out on it. But it is a majorpain.SolidworksParts And Features
SOLIDWORKS User Forum
15 anos atrás
Is it possible to put in a mitred cut angle column on a weldment cut list, i.e. structural members that are mitred would have a column that specifies what angle they are mitred at.SolidworksWeldments
SOLIDWORKS User Forum
15 anos atrás
Yeah, I've read a lot of very interesting discussiosn ondrawing practices, and I know this is a SW forum, so I waswondering if there's a more approprate forum for asking GD&Trelated quesitons? (one that doens't require paying for amembership also) Thanks, BM SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 anos atrás