Per gestire il sito Web, renderlo più facile da usare e tenere traccia delle visite vengono utilizzati i cookie. Utilizzando questo sito Web, acconsenti all'uso dei cookie.
Ulteriori informazioni |
trying to fill that hole with a surface so I was just going to loft it but that does not seem to work out well boundary surface I could not get to work at all along with filled surface so any help I would be thankful. Hi I am still pretty new to solidworks so just a couple of quick questions. First how do I make a spline off part data? Fit spline does not fallow the line true.
SOLIDWORKS Forums
16 ore fa
What is a good program to open and critique/mark up 2D architectural drawings? I know this is a SW site and all but I've just never come around toDraftsightwhich would also be an option ...
SOLIDWORKS Forums
16 ore fa
Is there a way to read folder id and full file path of selected file in EPDM vault I am trying below code but not works for me
SOLIDWORKS Forums
16 ore fa
I’m trying to check out a part or assembly and set variable value getVarSuccess = EnumVarObj.GetVar("Number", "@", attrObj)
SOLIDWORKS Forums
17 ore fa
I found a Discussion (Dimension arrow missing its tail?) that addresses the same problem, without a solution. I seem to remember another Discussion in the last month or two where it was fixed, but I can't find it. Am I imagining things, or does anyone have any ideas?
SOLIDWORKS Forums
17 ore fa
If I right click on a file in PDM and select Notify a colleague it does not include a hyperlink to the file location in the message. Is there a way to auto-generate this hyperlink when I create the notification? I thought this was working at one time... maybe I'm going crazy and it never has. Any thoughts?
SOLIDWORKS Forums
18 ore fa
Many years ago a collegue managed to add a general table into our sheet format. (for tolerance ect.) Now i would like to make an new update for all our templates. With a table for materials, quality, changes of the drawing ect. The collegue has left the company before i even joined. I cant manage to add a general table to the sheet format.
SOLIDWORKS Forums
18 ore fa
What is the advantage in having your part developed centered on the point of origin? . Do you always extrude from Mid-Plane?
SOLIDWORKS Forums
18 ore fa
(This may have been asked before, if so, if you kindly led me to a pertinent discussion I would appreciate it. I have read several threads that didn't particularly go where I wanted.) I am working on a part (or components) that consists of 4 pieces, and doing top-down methods for the first time.
SOLIDWORKS Forums
19 ore fa
I have just created my first assembly that is placed in the design library. It is a gear reducer that will have an adjustable motor mount. This will be used in multiple future assemblies, but the motor mount will be in different locations. Other than using configurations, is there another way that I could modify the distance mating condition each time I add this assembly into a different design?
SOLIDWORKS Forums
19 ore fa
Do you use the Measure Tool in SOLIDWORKS? If yes, I want to gather a little input on the tool from you. Can you please share some information on few queries below:
SOLIDWORKS Forums
19 ore fa
I am working with high strength steel grade S700MC and I would like to know if somebody here work with it and which parameters you use in SW for it. I think the K factor should be between 0.4 and 0.5 but difficult to have something accurate with our trial a 0.05 change a lot in fact. Or press brake software use the same rule for unfold S355 and S700MC for me that is wrong but I need your help for find out.
SOLIDWORKS Forums
19 ore fa
I have a macro that needs to update a concentric mate. In the image below there is a pattern of the part "1400-015-035-0", I update the pattern using the macro to change the number of parts from 15 to 20, then I need to update this mate to attach to the 20th instance of this part. Can I do this within a macro? I am writing all of this in VBA.
SOLIDWORKS Forums
19 ore fa
I want to mirror green colour feature to opposite site about top plane. Different result is obtained when Geometry Pattern is check marked and not check marked. Please explain the difference about two different results.
SOLIDWORKS Forums
19 ore fa
I am new to FEA and I am trying to figure out how to do a simulation on threads to see if they will hold the desired weight without shearing or pulling out. I feel like the threads need to be touching to do this but I can't figure out how to mate them together or maybe there is another way? I'm not sure if this can be done by the expression version.
SOLIDWORKS Forums
20 ore fa
I want to save library feature parts in a Dropbox folder so that I can access them from different workstations at different work locations. If I do this, the feature doesn't appear in the selection list, e.g. weldment profiles.
SOLIDWORKS Forums
20 ore fa
I have a question about MathTransforms. I'm trying to construct a MathTransform that I would otherwise
SOLIDWORKS Forums
20 ore fa
I want to add decal in cylindrical face, but it appears at the back face of the cylinder, also. How to delete the back decal part. Guiping,.. change your Mapping to "Label" (image attached)
SOLIDWORKS Forums
20 ore fa
I have a part that is a sweep following a helix path. I want to convert it to sheet metal so that I can flatten the part to CNC it. that doesn't sound like the kind of shape that will convert well.
SOLIDWORKS Forums
20 ore fa
I have a problem when sketching. I am using solidworks 2016 education edition.
SOLIDWORKS Forums
22 ore fa
toolbaox size issue When we insert a part from toolbox like washer or a bolt. When I open assembly in a different PC the size is increased.
SOLIDWORKS Forums
22 ore fa
We have certain parts that get used rather often. Unfortunately there wasn't really a set manner to name them but all of them have "start" it them. E.g.: startflens_PP , startflens_RVS , HDPE_start , PVC_start, etc.
SOLIDWORKS Forums
23 ore fa
Issues when using Flow Simulation I am trying to test the efficency of a Propeller I have modeled up using Flow Simulation. I have watched a few youtube videos (both in a langugae I do not speak) and tried to just follow the visuals.
SOLIDWORKS Forums
23 ore fa