Frequently Asked Forum Questions(see attached PDF) has 25 topics, and I think that's enough without it getting too difficult to navigate, so I'm starting a new one. To avoid confusion I'll start here with #26. I'll add to and edit this periodically, and if you see a mistake or have a suggestion please send me a Private Message. I really hate typos.
SOLIDWORKS Forums
15 時間 前
I've designed a dozen or so brackets that need to have some text machined on them. We're using EZ-Cam on the shop floor. If I make an extruded cut with font, EZ Cam creates a pocket.
SOLIDWORKS Forums
15 時間 前
I work with assembly's that have multiple pem nuts in them. Is their a way when I make configurations that I can suppress the pem nuts that are not mated to the part without picking them individually or group selecting them. You can do a box select on the screen or use the CTRL key and select them from the feature manager tree.
SOLIDWORKS Forums
16 時間 前
Even though Circular Sketch Pattern and origin point is used to develop this model. Why sketch is not symmetry? I do know whetherCircular Sketch Pattern will bringsymmetry.
SOLIDWORKS Forums
16 時間 前
Benutzerdefinierte eigenschaften sp 3 bei solidworks seit der Installation funtzt die benutzerdefinierte Eigenschaften nicht mehr?
SOLIDWORKS Forums
16 時間 前
I have been having issues with my model not showing correctly when opened from a parent assembly. It looks like the attachment and then you can see the part correctly when rotated (second screen shot). Then when opened again I get the screenshots with the prefix part1.
SOLIDWORKS Forums
16 時間 前
Shell elements contact I am trying to make a static simulation for the following assembly. The tow suspension bars and the three plates are modeled as shells.
SOLIDWORKS Forums
16 時間 前
I don't know if anyone else is seeing this issue or not but here's what i experienced. I started up my computer this morning and windows started updating, i let it do its work because its usually necessary and non detrimental. I could not use or create any drawings, my program was highly unstable, and my support representative actually crashed SW with the escape key. needless to say i reverted back to the older version of windows (which is apparently only an option for 10 days after the update)
SOLIDWORKS Forums
17 時間 前
I feel stupid for asking because Ive used SW for along time and have seen this message before but after doing so research on the Internet and my SW Bible I have yet to get the answer Im looking for. I opened an assembly that has an assembly in it and I had errors that told me to edit definition in the assembly that is referenced in this assembly. I opened that assembly and there are no errors. I checked all the parts and there are no error's.
SOLIDWORKS Forums
17 時間 前
I'm in the process to invest in a VDI solution and want some advise which NVidia card to buy. The M60 or the P40. At the moment I have two suppliers and one is telling me the M60 is better for SolidWorks and the other is advertising with the P40.
SOLIDWORKS Forums
18 時間 前
I want to use information from the "Modify Configurations" table for my macro. For example the value 100 mm from the cell (Standard/D1) is needed. Unfortunately I found only examples how to read configuration specific values from the "Summary Information" window which are not the ones I need.
SOLIDWORKS Forums
18 時間 前
document Manager getting assembly components. I can get components of assembly file after open it in solidworks as below
SOLIDWORKS Forums
18 時間 前
Is there any person/company that would want to write a Macro for SolidWorks (paid, of course)? I would like to send my requirements and receive a price quote.
SOLIDWORKS Forums
18 時間 前
I have been a Solidworks user since 2001 and have not had to model a mechanism like this until now. I need to model a mechanism similar to the one shown in this video. (pretty cool motion)
SOLIDWORKS Forums
19 時間 前
Parting Surface Sheets Wont Knit? I've been working on a mold for a part for quite a while and I've been stuck since it keeps giving me the same rebuild error (cant knit sheets) when I try to make the tooling split. I've made some molds before but I have never run into this problem and I would appreciate some help.
SOLIDWORKS Forums
19 時間 前
I am looking for a macro to create a midsurface using Solidworks for solidworks simulation Jive Software Version: 2016.3.8.1, revision: 20171004112525.b7233dc.nomerge_2016.3.8.1
SOLIDWORKS Forums
19 時間 前
I am trying to create a macro that will delete a note off of a current drawing sheet format. The note is standard on the template but is only needed on certain drawings.
SOLIDWORKS Forums
19 時間 前
I for a long time had DraftSight free version installed on a laptop. I have lost the use of the laptop and wanted to install DS on my desktop Windows 8.1 Pro system.
SOLIDWORKS Forums
19 時間 前
I need to construct this particular corrugation in solid works. It has zig zags along two axes. For visualisation, look up Miura Map Fold. The Unit Cell geometry for each parallelogram should be 120, 60 degree angles.
SOLIDWORKS Forums
19 時間 前
Hello, I have a sketch with a spline and several planes intersecting it. Is there a way to get the points where the reference planes intersect the spline programmatically? Maybe using 3D sketches?
SOLIDWORKS Forums
19 時間 前
I have a following code which is not allowing me to save file to PDF. I was wondering if someone can help me with it. This code, checks if a folder exists and if not it creates the folder, add revision number to the file name.
SOLIDWORKS Forums
20 時間 前
I am trying to see flows through some openings, and I want to visualize the amount of flow through each opening/surface. Is there a way we can visualize volume flow? Tags:none(add)volume_flow_rate
SOLIDWORKS Forums
20 時間 前
Hello, I need some help to find the right commands for the following (I hope there are some...) Attached is an assembly "demo.sldasm" (all parts included) and a drawing template "Spannskizze.drwdot".
SOLIDWORKS Forums
20 時間 前