i have a prolem with render in PV360. when i render image in Photoview360, shadow is good, i render anmation in photoview360, shadow's not good.Please help me !!! tks all .
SOLIDWORKS Forums
3 ч назад
On some of my harnesses I need just one connector and stripped ends on the other end. Is there is a recommended way to do this? On this example, I manually added extrusions to the ends:
SOLIDWORKS Forums
5 ч назад
There is a 26 year old rendering software called POV-RAY and it can render volumetric laser light... Here is a link to the example rendered image:http://guido.vonrudorff.de/wp-content/uploads/2013/01/final.png
SOLIDWORKS Forums
13 ч назад
Thicken curve Hi guys I cant get my curve to thicken wondering if anybody could help
SOLIDWORKS Forums
19 ч назад
I need to copy the ANSI Inch standard in Hole Wizard so that I can modify it and add part numbers, a description, etc. When I am using my personal Toolbox, this feature works fine. However, when I switch to my PDM Toolbox, it does not work even with the sufficient permissions. I can click the double folder for copying and it loads for a bit but a new standard is never created.
SOLIDWORKS Forums
21 ч назад
Hi has anyone come across this problem. I have a chassis plate assembly which is configured in SW Electrical I then opened the 3D assembly fro within SW Electrical and all is fine there is association with the components within SW Assembly. After a period of time of updating things closing the project etc.
SOLIDWORKS Forums
21 ч назад
When we use connectors that are a housing with their terminals sold separately, we need to track those two items separately in inventory. Other than manually entering additional lines in my BOM list in the drawing, I can't figure out a good way to include my contacts as separate line items. Does anyone else have a good system for including the contacts for each connector in their BOM?
SOLIDWORKS Forums
22 ч назад
I am currently somewhat stuck with what I think is an issue with my current setup. I have a case which contains two different parts (both are defined as routing parts through the wizard and have the appropriate connection points). Now I would like to create an assembly of those three parts.
SOLIDWORKS Forums
22 ч назад
I'm having issues with getting this concept to work. So someone can create a part, but the only time the serial number will be generated is when the part is changed to the assign state. My add-in then checks to see if there is a serial number in the data card and creates a pop up window for the user to specify the part type. I've gotten it to pull up the window on any state change, but can't isolate it to the "assign-to" state change and pull the information on the part from the database so that
SOLIDWORKS Forums
22 ч назад
Are there any terminals in the symbol library that use the wire number as the terminal number? This is where the propagate command comes into play. You can number the terminals, then the wires (or vice versa) then choose to propagate the wire number to the terminal or terminal number to the wire...
SOLIDWORKS Forums
23 ч назад
Hello everyone please i need some help.. I am facing a problem with my cnc milling machine , when i finish a sketch of spline and circles and then save the Drawing as dxf file , after copying the file to the machine i find that every curve spline and circle are not shown instead the machine shows a single straight line !!
SOLIDWORKS Forums
1 день назад
I have two the same parts with confuguration in my assembly. I want to switch configurations with rules in this parts separatly. Is it possible? In captured assembly structure it is showed as one part and I don't know how to separate them to make two separate rules.
SOLIDWORKS Forums
1 день назад
When looking at the reports in the report manager there are row numbers. Those row numbers do not appear on the drawing when you generate them. I'd like them to.
SOLIDWORKS Forums
1 день назад
Unarchiving problem with file downloaded from Electrical Data Portal I wouldn't think the file from the portal would be corrupt. Can someone please check this particular file?
SOLIDWORKS Forums
2 дн. назад
Good Afternoon All, I believe that I already know the answer to this is "NO", but this is my final effort before starting the process.
SOLIDWORKS Forums
3 дн. назад
I made a new part and saved it to my desktop, I am not trying to check it into pdm standard vault and it will not let me. Does anyone know why? Evan Leftwick wrote:
SOLIDWORKS Forums
3 дн. назад
When rendering the part below I get a horizontal whitish 'stripe' through the middle of it. I can't figure out why. The .sldprt file I'm using is attached.Anybody willing to take a look? If there's something else you need, I'll provide it.
SOLIDWORKS Forums
3 дн. назад
I am using different grade and material fasteners. For example I have both a .250-20UNCx1" grade 5 bolt and a stainless .250-20UNCx1" bolt and a .250-20x1" grade 8 bolt. They are used on different projects but they all share the same toolbox. How can I assign different part numbers to them even though they are the same configuration of the toolbox component?
SOLIDWORKS Forums
3 дн. назад
Task Scheduler problem I have a problem in with Task Scheduler . When I convert solidwork drawing file to DWG file using solidwork task scheduler.
SOLIDWORKS Forums
4 дн. назад
I have unarchived Allen Bradley's drive library but when I use the wizard to process the symbols, and part numbers the Manufacturer parts are not processed. When I look for the AB part numbers in the database all I see is Kinnetix and no PowerFlex. I get this report saying 1035 Manufacturer partsNot processed.
SOLIDWORKS Forums
4 дн. назад
I am using solidworks electrical for Aerospace harnessing. What I am trying to do is to create a specific report that I will use with an automated cable tester, such as a Cirris cable tester. For this application, I need a report which has columns for: [origin mark, destination mark]
SOLIDWORKS Forums
4 дн. назад
I don't see it in the available post processors. Is there a way to add a Tormach post processors to the list or a plan on adding it in the future? I don't know about Tormach but I have a Brother TC-S2A and was in the same boat.
SOLIDWORKS Forums
5 дн. назад
I create one add-in in SW2015 by vb.net,but it can not work on SW2017. Jive Software Version: 2016.3.8.1, revision: 20171004112525.b7233dc.nomerge_2016.3.8.1
SOLIDWORKS Forums
5 дн. назад
I'm trying to do visualizations using PhotoView 360, and have noticed that the SolidWorks add-ins > PhotoView 360 selection is reset after restarting SolidWorks. Is this normal? How can I make it persistent?
SOLIDWORKS Forums
5 дн. назад