Узнайте, что обсуждают пользователи SOLIDWORKS.
Категории:
Сортировать:
As I just set these two simpler components to describe my question. ↓This is the starting point of the motion.
1 ч назад
dynamic motion analysis can anyone pls tell me how to conduct dynamic motion analysis in solidworks?
9 ч назад
hello all animation guru's. I was wondering if users of Solidworks would be willing to post simple animation movies here of work they have done? Just for general interest.
1 день назад
I have to blocks settled on each other, and I would like to know the force that could push them off each other. If I add mates to make them on top of each other, the force would move both of them. How can I tell solidworks that they are different bodies but attached to each other, so I could find the force to separate them?
1 день назад
I am currently working on a university assignment that involves doing a motion analysis on a Whitworth quick return mechanism that is used in a shaping machine, I have done mathematical analysis in order to obtain plots of the reciprocating rams displacement, velocity and acceleration, now I am looking to verify these results with a SolidWorks motion analysis study. I have created the simplified model pictured below and set up a motion analysis study in order to drive the system at a constant
1 день назад
I can't understand how the design study receives such an angle? Instead of 30 degrees it shows 1900 degrees! How?!
1 день назад
I'm finding it difficult to place a key on a whole or half number.. before it would snap to 23.5, or 11.2 etc.... Is there a setting I got off? I
7 дн. назад
I am using screw mate between nut and lead screw. screw is rotating and and nut is translating linearly on screw. but, when I am running motion study it is not starting motion from the point I want to start. So, can you please tell me how I can start motion of nut from a point I want. pull the timebar to the start of the animation.
10 дн. назад
The scissor lift raises very fast for the first half then very slow on the last half. I need the platform on top to raise at an even speed the duration of the animation. Any suggestions would be amazing!
10 дн. назад
Hey all, I'm having a problem where I cannot seem to figure out how to only have gravity in a motion analysis affect certain parts. How can I single out parts that are effected by gravity? Thanks!
16 дн. назад
Can a solidworks standard 2017 perform analysis of rotational force applied on a flywheel model? Not used it but I'd have thought the centrifugal load would be relevant to you:
22 дн. назад
I have a ring that rotates about an axis (See .gif image). The motion profile is symmetric (same acceleration and deceleration). It simply accelerates to 360 deg/s and then decelerate back to 0 deg/s over the same time period. Screenshot1 shows power consumption results that make sense.
26 дн. назад
I made this quick model to try something in motion studies. I have this bowl, and i have its axis constrained to front and right planes, and the bottom coincident to the top plane. I positioned the three balls above the bowl in the first animation frame. I have all of their materials set to plain carbon steel.
28 дн. назад
Case: From the attached image it is observed that there is a link attached to a reference body by a pin on one of its end which acts as a revolute pair. The other end of the link is free.
29 дн. назад
Torsional spring preload possibility Hi! I know that for line springs preload is calculated by diffrence between two-point size on model and spring free length.
1 мес. назад
I'm new to Solidworks and learning how to make the animation. This is my assembly consist of different materials and colors.
1 мес. назад
Are there keyboard assignments in Motion Manager for things like play, stop, etc.? Since there is not menu for these buttons I do not think that you can have keyboard shortcuts for them. But macros can be made for these buttons which can be triggered via keyboard buttons
1 мес. назад
I just wanted to make sure I'm spending time with a product for which SolidWorks has a vision. With Motion, it is difficult to get help and if you look at the forum entries many of them go un-answered. It seems to change very little, with the exception of becoming chromatically challenged in 2016 to match the rest of the SolidWorks software group.
1 мес. назад
I'm looking for advanced tutorials in motion analysis study, Have you checked any of these out?
1 мес. назад
It is my first time to meet the motion mates with special sign on it when I run the motion. And the Motion collapsed when I run this motion Could you tell me how to recovery the mates to the normal state?
1 мес. назад
the gear and the plate are not concentric. there is a teeth on the plate which will move the gear to rotate. The effect to simulate is that the plate will rotate in a constant speed. when the teeth touch the gear, it will push the gear to rotate. when the teeth is departed with the gear, the gear should stop rotating. I set up the contact between the gear and the plate. But the strange thing is, although the gear will start to rotate when the teeth touch it, but it will not stop rotating when
1 мес. назад
As shown in Figure, I want to calculate the torque at a shaft parallel to the motor shaft. Both shafts are attached through 2 pulleys and belts as shown in Figure. For maintaining a similarity between my application* and solid works model, I have attached an imaginary motor to smaller pulley A..
2 мес. назад
I'm setting up a motion analysis and I have an example where I want to study the coasting down from full speed to zero as the power is turned off. The rotor of the electric motor has some inertia, but most of the friction (that slows down the machine) comes from the internal components. I want to link the rotor axis to the internal moving parts, so as to simulate the coasting down from full speed to zero, and then the internal components will act as a "brake" that slows down the motor. To
2 мес. назад
Hello guys, hope some of you can answer this, cause i am quite stuck in there... I want the little piece of metal from the black plastic bracket to bend whenever i screw in or out from the slot. I respectively named the 3 files to open : Open_this_one1 Open_this_One2, Open_this_One3
3 мес. назад