Mirror existing sketch entities with the Mirror Entities tool or by adding symmetric relations. Or, dynamically mirror sketch entities as you create them. Mirror sketch entities that you previously created. Dynamically mirror sketch entities as you create them. Add symmetric relations to sketch entities to mirror the entities.
6 months ago
Use the ConfigurationManager to add configurations to an assembly and show two versions of its components. Also, explore the advanced options of configuration properties. Use the ConfigurationManager to add configurations to an assembly. Use the advanced options of the configuration properties to control new components and mates. Create two versions of the assembly to represent different available components.
6 months ago
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
6 months ago
Global variables declare a named value that dimensions can be set equal to or that can be used in equations. Equations are mathematical expressions that can define dimension values as well as relate dimensions to each other. Create global variables. Use global variables to set fillet features to be equal radii. Use global variables in equations. Use equations to control dimension values.
6 months ago
Insert driving dimensions into a sketch using the versatile Smart Dimension tool. With a single tool, you can create radial dimensions for arc, linear dimensions between two points, and more. The dimension that appears depends on the entities you select. Insert linear, angular, radial, and other dimensions. Modify dimensions. Move and reattach dimensions.
6 months ago
Trim sketch entities to remove unwanted geometry. Trim sketch entities by their proximity and intersections with other sketch entities. Trim sketch entities using Power, Corner, Closest, and Inside and Outside options.
6 months ago
Create a drawing from an existing part file, insert basic views, and insert and manipulate dimensions and callouts. Make a basic drawing of a part. Insert standard views. Import dimensions from a model into a drawing. Make a change to a dimension. Demonstrate the associativity between the model and its drawings.
6 months ago
Explore the various methods for moving and rotating components, including dragging, using the triad, and setting the options in the PropertyManager. Explore the options for detecting collisions between components. Calculate the minimum clearance distance between components. Move and rotate a component by dragging, using the triad, or using the options in the PropertyManager. Identify the clearance between options when moving components. Detect collisions between moving components and other components.
6 months ago
Use bill of materials (BOM) tables to call out the components of an assembly. Bill of materials can be modified in many ways and new table templates can be generated to save customizations. Tabulated bill of materials can list information about multiple configurations within the same table. Create a bill of materials for an assembly. Modify a bill of materials table to add and reorder column. Save a bill of materials as a template. Create a tabulated bill of materials.
6 months ago
Create points, axes, and coordinate systems to aid in the creation of features and helps with the use of measurement tools. Explore the options to create reference points, axes, and coordinate systems based on one or more model entities.
6 months ago
Review the various end condition options for extruded features. Examine the end conditions defined by distance from the sketch: Blind, Through All, and Midplane. Examine the end conditions defined by existing 3D geometry: Up to Next, Up to Vertex, Up to Surface, Offset from Surface, and Up to Body. Identify geometry differences based on the selected end condition.
6 months ago
Create a sketch driven pattern, table driven pattern, curve driven pattern, and a fill pattern. These patterns allow you to pattern features in non-linear or non-circular directions. Use sketch points to define a sketch driven pattern. Specify coordinates for a table driven pattern. Convert entities to create a sketch for a curve driven pattern. Distribute features within a boundary using a fill pattern.
6 months ago
An introduction to the basics of SOLIDWORKS and the user interface. Explore the definition of SOLIDWORKS. Understand how Design Intent is used. Explore the SOLIDWORKS user interface. Access the SOLIDWORKS Options.
6 months ago
Diagnose and repair issues with sketches including extraneous geometry, dangling dimensions, and dangling relations. Diagnose problems in a part. Repair sketch geometry problems. Repair dangling relations and dimensions. Use the What's Wrong dialog. Edit the plane used by a sketch.
6 months ago
Interrogate a part using rollback to understand how it was created. Change the sequence of features and edit features, sketches, and sketch planes. Roll forward through an existing part. Reorder a feature in the FeatureManager design tree. Understand parent/child relationships. Edit sketches and features.
6 months ago
Copy instances of one or more features or bodies by mirroring them across a reference plane or planar face. The resultant copy is reversed, as if seen in a mirror, maintaining symmetry. Create mirror patterns of features and bodies. Control results with geometry pattern option.
6 months ago
Create a pattern of one or more features or bodies in one or two circular directions. The circular direction is based on a cylindrical or conical face, a circular or linear edge, centerline or axis. Spacing of instances can be controlled in different ways. Create circular patterns of existing features. Vary spacing and range.
6 months ago
Create a pattern of one or more features or bodies in one or two linear directions. Unwanted instances can be left out of the pattern, and spacing and other dimensions may be varied. Create bi-directional linear patterns of existing features. Skip instances in a pattern. Vary parameters of pattern instances.
6 months ago
The Hole Wizard feature creates standard-sized holes according to ANSI, ISO, and other international standards. Hole type, size, and placement location are input by the user. Create hole wizard holes. Learn the elements and options of a wizard hole. Create multiple holes in the same feature.
6 months ago
Create fillets and chamfers to modify geometry in a sketch. Set the size and options for the sketch fillets and sketch chamfers. Create fillets and chamfers in a sketch. Understand the options for creating sketch fillets and sketch chamfers.
6 months ago
Use design tables to quickly create many configurations that change the values of dimensions and the suppression states of features. Set up a model to effectively use design tables. Understand the options when creating a design table. Add columns to a design table for additional dimensions and features to control. Add rows to a design table for additional configurations to create.
6 months ago
Easily manage your data and product lifecycle in the cloud, helping you to increase business agility and bring innovative products to market faster.
6 months ago
Please Note in Presentation 1 (1:34): The automatic voucher redemption system is currently disabled, but our team can still help you manually. Just email certification@solidworks.com with the information below to receive access to your free vouchers. We will need: The email address you use for your certification account Your company name The SOLIDWORKS serial number on subscription that you are using (or the 3DEXPERIENCE role that you are using) The exams (up to 3) you would like to take this semester ------------------------------------------------------------------------------- Navigate the SOLIDWORKS Certification Center to view your completed certificates, review exam results, and much more. Explore the tools available in the SOLIDWORKS Certification Center. Review user settings. Search for certified users and certified resellers and training centers.
7 months ago
Get started with the 3D Creator role. Understand the basics of the xDesign app and create a simple part and assembly.
7 months ago