Add end caps to close openings at the ends of structural members. Create an end cap in a weldment part file. Set the offset values and shape of the end cap.
Lesson
1 year ago
Create a weldment frame from a series of layout sketches. The weldment environment uses standard weldment profiles to define the type of structural members in the weldment. Members of the same type and size are created in one feature. Create a weldment frame. Insert structural members. Relocate the profile sketch. Change corner treatments.
Lesson
1 year ago
Explore the Miter Flange feature, including sketching the profile, edge selection, and other pertinent options. Create a miter flange. Learn and understand the different options for miter flange.
Lesson
1 year ago
Create a sheet metal part of constant wall thickness using sheet metal features. Explore the fundamentals of creating sheet metal parts using the flange method. Create a base flange in a sheet metal part. Understand the use of gauge tables and sheet metal options. Flatten a sheet metal part.
Lesson
1 year ago
Use several direct editing techniques for working with imported geometry using surfacing tools. Explore the Delete Face tool, the Delete Hole command, and the Untrim Surface tool. Use the Delete Face tool to remove an unwanted imported geometry feature. Use Delete Hole and Untrim Surface to remove an unwanted imported geometry feature. Convert a surface body into a solid body using the Thicken command.
Lesson
1 year ago
Use extruded, revolved, and swept surfaces to create geometry. Trim, extend, knit, and thicken the surfaces to finish the thin-walled model. Extrude a sketch to create a surface. Revolve a sketch about an axis to create a surface. Trim a surface using a sketch or another surface as the trim tool. Sweep an open profile along a path to create a surface. Combine multiple surfaces into a single body using knit surfaces. Thicken a surface body to create a solid body.
Lesson
1 year ago
Create basic, aligned, offset, and partial or half-section views, including scope and advanced properties. Add several types of section views to a drawing. Define section view properties. Modify section views.
Lesson
1 year ago
Insert annotations into existing drawing views, including custom notes, geometric tolerances, and blocks. Create annotations and symbols. Create blocks from geometry and notes. Save a block to a file. Insert a block into a drawing.
Lesson
1 year ago
Replace one component with another in an assembly. Replace selected instances of a component in an assembly with a new part. Optionally, re-attach mates to simplify the insertion of the replacement component.
Lesson
1 year ago
Insert features in an assembly that exist only in the assembly and not the individual part files. Add a Hole Wizard assembly feature. Create an assembly feature cut to act as a section view. Modify the feature scope to determine which parts are affected by the assembly feature.
Lesson
1 year ago
Add each of the six mechanical mate types to control the degrees of freedom of components when designing mechanisms. Mate a cylinder, plane, or point to a series of tangent faces with a cam follower mate. Limit the rotational movement between two components with a hinge mate. Move one component linearly to move another component rotationally with a rack and pinion mate. Add a pitch relation between the rotation of one component and the translation of another with a screw mate. Rotate two components relative to one another with a gear mate or a universal joint mate.
Lesson
1 year ago
Bend a sheet metal part by using a line sketched on a flat portion of the sheet metal body. Bend a sheet metal part in two locations using separate sketches. Sketch bend lines.
Lesson
2 years ago
Create an edge flange along a combination of linear and non-linear edges. Create edge flanges along curved edges. Understand how the flange position must be chosen relative to other geometry to prevent sharp edges.
Lesson
2 years ago
Sketch and loft between two sketch profiles to create a sheet metal part. Understand the requirements for the sketch profiles and the loft feature. Sketch the profiles for a lofted sheet metal part. Understand the requirements for a lofted sheet metal part. Set the thickness and bend line options.
Lesson
2 years ago
Explore the Edge Flange feature, including edge selection, bend direction, and other pertinent options. Create an edge flange. Learn and understand the different options for edge flange.
Lesson
2 years ago
Locate and diagnose problems in geometry imported from other CAD software. Then, use surface tools to repair the damaged geometry. Diagnose problems in a model with verification on rebuild, import diagnostics, and check entity. Heal faulty faces using the import diagnostics tool. Delete faulty faces and use various surface tools to re-create the geometry. Display curvature and check the minimum radius of curvature. Delete and replace fillets to create smoother blends. Extend, trim, and knit surfaces.
Lesson
2 years ago
Use surface tools to create complex blends at the intersections of surfaces. The tools used in this module include trim surfaces, lofted surfaces, and fill surfaces. Trim surfaces using a sketch as the trim entity. Create a blend between surfaces using a lofted surface. Fill an area that is completely bounded by surfaces using the fill surface tool.
Lesson
2 years ago
Create several types of derived drawing views and understand the unique characteristics of each view type. A derived drawing view is created by referencing an existing drawing view. Create a projected view by folding off an existing drawing view. Project a view normal to a selected edge to create an auxiliary view. Show a portion of a view at an enlarged scale using detail views. Create a drawing view relative to planes or planar faces in the model. Focus on a portion of a drawing view by cropping and hiding the unwanted entities. Shorten an existing drawing view using broken views.
Lesson
2 years ago
Update the parameters that control the overall shape and size of the part for the Certified SOLIDWORKS Professional sample exam. Manual edit individual dimensions and globally change the values of variables. Rebuild the model to ensure that all features update correctly.
Lesson
2 years ago
Understand the prerequisites of the Certified SOLIDWORKS Professional exam. Learn what you can do to best prepare for the CSWP exam. Identify the areas of the SOLIDWORKS software that you should study.
Lesson
2 years ago
Learn about the segments that make up the Certified SOLIDWORKS Professional exam. Identify the three segments of the exam: Part Modeling, Configurations and Part Modifications, and Assembly Modeling. Understand that you can take each segment as many times as necessary, after a waiting period between attempts has elapsed.
Lesson
2 years ago
Understand the Certified SOLIDWORKS Professional exam. Identify the benefits of becoming certified. Learn about some of the SOLIDWORKS skills you need to achieve certification.
Lesson
2 years ago
Use both bottom-up and top-down assembly modeling design techniques to insert and modify components in an assembly. Insert components into an assembly using a bottom-up approach. Modify a component using a top-down approach. Create a new component using a top-down approach.
Lesson
2 years ago
Move the components within a sub-assembly using flexible sub-assemblies. Modify the component properties of a sub-assembly to change it from rigid to flexible. Drag components of a flexible sub-assembly in the main assembly to observe their motion. Learn about the impact that flexible sub-assemblies have on overall assembly performance.
Lesson
2 years ago