Training Catalog
Learning Type:
Access Level:
Discover how to analyze a structure under repeated loading conditions using the Fatigue module. Apply S-N curves to materials for repetitive loading analysis. Apply correction factors for more realistic results. View damage plots to analyze material life.
Lesson
3 months ago
This series introduces the concept of contact as well as bolts and remote loads. Analyze contacts within assemblies. Simplify the model by eliminating parts which can be represented using connectors and remote loads.
Lesson
3 months ago
This module introduces the Simulation user interface and walks through the setup process for a simple part. The simulation is then run and the results are analyzed. Learn the Simulation user interface. Apply fixtures, materials and loads. Run the simulation and analyze the model for stress and displacement.
Lesson
3 months ago
Explore the differences between solid and surface bodies and learn why surface modeling can be a solution to challenging modeling tasks. Understand the difference between a surface and solid body in SOLIDWORKS. Learn why surface modeling should be used.
Lesson
3 months ago
Learn how to set up the CFD analysis in FloXpress. Understand the four pages for setting up an analysis: Check Geometry, Fluids, Flow Inlet, and Flow Outlet.
Lesson
3 months ago
Discover FloXpress to perform a first pass fluid flow analysis on a model using computational fluid dynamics (CFD). Understand some of the assumptions when using FloXpress. Explore the interface of FloXpress. Walk through
Lesson
3 months ago
Discover DFMXpress and see how to check the manufacturability of parts for certain manufacturing processes. Set up geometric rule parameters for each type of part. Identify features that may inhibit a part's ability to be manufactured. Review machined, sheet metal, and molded parts.
Lesson
3 months ago
Understand how export settings impact the quality of the 3D printed model. Learn about the different file types supported by todays 3D printers. Learn how to change file settings in SOLIDWORKS for better print results.
Lesson
3 months ago
Learn how to prepare a model before 3D printing. Understand how to orient the part for the best printing results. Understand the implication of infill, wall thickness, shrinkage, and more on part strength and material usage.
Lesson
3 months ago
Understand the difference between starting a sketch on a plane or planar face. Create the first 2D sketch profile on a reference plane. Create additional 2D sketch profiles on planar model faces of the part.
Lesson
5 months ago
Extend sketch profiles to create extruded bosses to add material and extruded cuts to remove material. Use sketch relations and dimensions to define sketch profiles. Understand some of the options for extruded features. Add material with an extruded boss and remove material with an extruded cut.
Lesson
5 months ago
Create assemblies by adding and orienting existing parts in an assembly. Add mates to connect the components. Create a new assembly from a part. Introduce the assembly FeatureManager design tree. Insert components into the assembly. Move and rotate components. Add mates between components.
Lesson
5 months ago
Create reference planes in any orientation using existing reference and solid geometry. You use reference planes for sketching or as a reference for other features. Create reference planes in a variety of orientations from different reference selections. Create reference planes from one or more geometric references.
Lesson
5 months ago
Use the sketch tools Convert Entities and Offset Entities to reference sketch entities and model geometry to create new sketch entities. If the original geometry changes, then the converted and offset entities also change. Create converted entities into a new sketch. Create offset entities. Create a slot using offset entities.
Lesson
5 months ago
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Lesson
5 months ago
Insert driving dimensions into a sketch using the versatile Smart Dimension tool. With a single tool, you can create radial dimensions for arc, linear dimensions between two points, and more. The dimension that appears depends on the entities you select. Insert linear, angular, radial, and other dimensions. Modify dimensions. Move and reattach dimensions.
Lesson
5 months ago
Trim sketch entities to remove unwanted geometry. Trim sketch entities by their proximity and intersections with other sketch entities. Trim sketch entities using Power, Corner, Closest, and Inside and Outside options.
Lesson
5 months ago
Create a drawing from an existing part file, insert basic views, and insert and manipulate dimensions and callouts. Make a basic drawing of a part. Insert standard views. Import dimensions from a model into a drawing. Make a change to a dimension. Demonstrate the associativity between the model and its drawings.
Lesson
5 months ago
An introduction to the basics of SOLIDWORKS and the user interface. Explore the definition of SOLIDWORKS. Understand how Design Intent is used. Explore the SOLIDWORKS user interface. Access the SOLIDWORKS Options.
Lesson
5 months ago
The Hole Wizard feature creates standard-sized holes according to ANSI, ISO, and other international standards. Hole type, size, and placement location are input by the user. Create hole wizard holes. Learn the elements and options of a wizard hole. Create multiple holes in the same feature.
Lesson
5 months ago
Please Note in Presentation 1 (1:34): The automatic voucher redemption system is currently disabled, but our team can still help you manually. Just email certification@solidworks.com with the information below to receive access to your free vouchers. We will need: The email address you use for your certification account Your company name The SOLIDWORKS serial number on subscription that you are using (or the 3DEXPERIENCE role that you are using) The exams (up to 3) you would like to take this semester ------------------------------------------------------------------------------- Navigate the SOLIDWORKS Certification Center to view your completed certificates, review exam results, and much more. Explore the tools available in the SOLIDWORKS Certification Center. Review user settings. Search for certified users and certified resellers and training centers.
Lesson
6 months ago
Learn the basics of SOLIDWORKS design, and build a SOLIDWORKS feature-based, parametric, solid model using sketches and features. Create a new sketch. Sketch geometry like lines and circles. Add relations and dimensions. Revolve and extrude sketches to create features. Shell to create a thin walled model. Test the design with dimensional changes.
Lesson
8 months ago
Navigate through all the documents of your inspection project: Move between pages. Zoom In/Out. Hide or show extracted annotations.
Lesson
11 months ago
The Linear Structural Validation app is used to perform a linear static analysis on a simple part. The simulation is then run and the results are analyzed. Learn how to set up the linear static study. Apply fixtures, materials and loads. Run the simulation and analyze the model for stress and displacement. Generate and review the simulation report.
Lesson
11 months ago