교육 카탈로그
학습 종류:
액세스 수준:
Product/Role:
정렬:
버전:
정렬:
언어:
카테고리:
정렬:
피로 해석 모듈을 사용하여 반복되는 하중 조건에서 구조를 해석하는 방법을 탐색합니다. 반복 하중 해석을 위해 재질에 S-N 곡선을 적용합니다. 더욱 사실적인 결과를 위해 상관 계수를 적용합니다. 재질 수명을 해석하기 위해 손상 플롯을 봅니다.
3 년 전
Review the basic functionality of the SOLIDWORKS Dynamics module. Show activation of SOLIDWORKS Simulation Add-In. Review the available modules for specific dynamic load times.
3 년 전
Setup initial dynamic simulation, solve and postprocess the results. Understand the importance of natural frequencies in dynamic simulations. Compare the dynamic and static results. Setup, run and postprocess a basic transient study Calculate a sufficient number of natural frequencies Use the mass participation factor to estimate a sufficient number of natural frequencies Run dynamic simulation for slow and fast forces, and compare their results
3 년 전
Setup, run and postprocess a dynamic simulation with the base motion shock excitation. Understand the optimum mesh design, and get more familiar with the estimation of the minimum number of natural frequencies. Understand the basics of damping. Setup, run and postprocess a transient study Define base excitation shock load Use the mass participation factor to select a sufficient number of natural frequencies Optimize the finite element mesh for dynamic simulation Define structural damping Calculate the maximum time step Use remote mass to simplify the model
3 년 전
Setup, run and postprocess a harmonic simulation. Understand and practice the frequency domain excitation definition. Practice postprocessing results from the harmonic study. Setup, run and postprocess a harmonic study Use the mass participation factor to select a sufficient number of natural frequencies Optimize the finite element mesh for dynamic simulation Define the harmonic load in the frequency domain Postprocess results from the harmonic study
3 년 전
Review the basic functionality of the SOLIDWORKS Nonlinear module. Show activation of SOLIDWORKS Simulation Add-In. Learn three basic nonlinear phenomena in engineering calculations. Review of control methods available in the module. Review of basic material models available in the module.
3 년 전
Review the difference between small displacement linear, and large displacement nonlinear analyses. Introduce the concept of time curves, and discuss basic options. Solve small displacement linear analysis to demonstrate inaccurate solution. Define a nonlinear simulation study. Use time curves to control variation of the nonlinear loading. Use fixed increment stepping, and autostepping stepping procedures to solve the nonlinear problem. Postprocess results of the nonlinear simulation. Compare results from nonlinear studies with various setup parameters.
3 년 전
Introduction to the force control and displacement control methods in nonlinear module. Experience and resolve solution instabilities when solving nonlinear problems. Define nonlinear study boundary conditions and loads. Stabilize force control method to arrive to a final solution. Solve the problem using the displacement control method. Adjust boundary conditions for the displacement control method. Compare nonlinear results from the force control, and the displacement control methods.
3 년 전
Introduction to the material nonlinearity, namely metal plasticity. Effect of mesh quality on the quality of the numerical stress results. Solve problem with linear small displacement solution and identify a need for the nonlinear solution due to high stress. Define nonlinear study boundary conditions and loads. Define nonlinear material model with von Mises plasticity. Use simplified bi-linear plasticity material model. Review the stress and displacement results at various times. Study effect of mesh quality on the quality of the stress results. Use the mesh sectioning feature to review stress distribution within the bodies.
3 년 전
모델 치수를 변경하여 모델 무게를 줄이는 설계 최적화 방법에 대해 학습합니다. 파라미터와 구속조건을 적용하여 목표에 맞게 설계를 최적화합니다. Simulation에서 설계 스터디를 사용하는 방법을 학습합니다.
2 년 전
Generate a cam profile based on an input follower displacement from a data set. Define a motion of a follower using Data Points. Generate a cam profile using Trace Path. Verify the generated cam profile.
2 년 전
Simulate a mechanism placing an object into a box and a cover on the box. Apply servo motors. Add proximity sensors. Create and run event based motion study.
2 년 전
SOLIDWORKS Simulation 제품군의 모든 모듈을 살펴봅니다. SOLIDWORKS Flow를 사용하여 열 전달 및 유체 유동을 해석합니다. Sustainability를 사용하여 설계가 환경에 미치는 영향을 최소화합니다. SOLIDWORKS Simulation을 사용하여 응력-변형 해석을 살펴봅니다. SOLIDWORKS Motion을 사용하여 강체 역학을 해석합니다. SOLIDWORKS Plastics를 사용하여 플라스틱 사출 파트의 채우기 패턴을 봅니다.
1 년 전
하중 케이스 관리자를 사용하여 서로 다른 설정의 하중을 결합하는 방법을 학습합니다. 서로 다른 하중 조건의 결합 효과가 설계에 미치는 영향을 알아봅니다. 해석에 적재 하중과 자중을 결합합니다. 편리한 하중 결합을 위해 방정식을 사용합니다.
1 년 전
복사, 전도, 대류를 고려하면서 열전달 해석을 수행하는 방법을 학습합니다. 전도, 대류, 복사의 효과를 고려하여 정확한 열전달 결과를 얻습니다. 온도와 열 유속을 측정합니다.
1 년 전
Learn about SOLIDWORKS Flow Simulation software. View sample applications from the real world. View sample real world examples where the software was used.
1 년 전
Prepare SOLIDWORKS geometry for Flow Simulation analysis. Create lids manually. Create lids using the Lid Creation tool. Check if the geometry is water tight for internal flow analysis. Detect leaks in improperly sealed geometry.
1 년 전
Build the SOLIDWORKS Flow Simulation project. Use Wizard to define Flow Simulation project. Define boundary conditions. Define goals. Mesh the model geometry.
1 년 전
Run SOLIDWORKS Flow simulation and monitor it. Postprocess Flow simulation results. Launch the SOLIDWORKS Flow simulation and monitor it in the solver window. Monitor execution of the simulation in the solver window. Postprocess results using cut plots, surface plots, flow trajectories. Create 2D graphs from the calculated results, extract results on desired geometrical entities.
1 년 전
Mesh the Flow Simulation geometry using automated meshing approach. Understand the Basic mesh, and Initial mesh concepts. Control the Global Initial mesh refinement level. Analyze the Minimum Gap Size feature value as the project settings change. Plot mesh on cut plots.
1 년 전
Mesh the Flow Simulation geometry using manual meshing approach. Control Basic mesh settings. Apply manual mesh setting and options. Define control planes. Define and apply local mesh controls. Plot mesh on cut plots.
1 년 전
SOLIDWORKS Motion is a virtual prototyping tool for engineers and designers interested in understanding the performance of their assemblies. Perform a basic motion analysis using SOLIDWORKS Motion. Simulate the weight of a vehicle on the jack. Determine toque and power required to lift it.
1 년 전
Examine the motion of a catapult as it is loaded and throws a projectile. Add solid bodies contact, add a spring and apply friction. Determine torque required to rotate the crank and load the catapult. Determine the displacement of the loading spring. Study the effect of contact friction on the motion of the projectile.
1 년 전
이 모듈에서는 Simulation 사용자 인터페이스를 소개하고 단순 파트에 이 설정 프로세스를 차례로 보여줍니다. 그런 다음 시뮬레이션을 실행하고 결과를 해석합니다. Simulation 사용자 인터페이스를 학습합니다. 구속, 재질, 하중을 적용합니다. 시물레이션을 실행하고 모델의 응력과 변위를 해석합니다.
1 년 전