Korzystasz z przeglądarki sieci Web lub przeglądarki w wersji nieobsługiwanej przez tę stronę internetową! Oznacza to, że niektóre funkcje mogą nie działać zgodnie z oczekiwaniami.
Aby w pełni skorzystać z tej witryny, zastosuj lub uaktualnij/zainstaluj jedną z następujących przeglądarek
Use the New Contain Area command on an operation to restrict toolpaths to a specific area. Copy the face mill operation containing the avoid areas and delete the avoid areas from the copy. Create contain areas on the copied face mill operation using the 2D sketches in the part. Generate a toolpath for the copied face mill operation. Examine the contain areas of the face mill operation.
Lesson
2 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?
Use the Combine Operations and Link Operation commands to combine like operation types. Combine operations for all like rough and contour mill operations. Drag and drop a hole feature from one center drill operation to a like center drill operation. Link like contour mill operations between two different setups.
Lesson
2 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?
Use Interactive Feature Regognition (IFR) to manually create a machinable feature. Create a corner slot feature using the 2.5 axis feature command. Review geometry selection options to define the feature. Set the feature end condition. Modify the machining strategy for the feature.
Lesson
2 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?
Use the Edit Definition command to modify contouring operation leadin and leadout parameters. Modify leadin type. Modify leadin amount and overlap. Modify arc radius and arc angle.
Lesson
2 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?
Use the edit definition command to modify contouring (finish) operations. Review contour operation parameters. Review side parameters settings. Review feeds and speeds tab.
Lesson
2 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?
Use the Post Process command to generate NC code from the parts toolpath and operation information. Select the post processor within the machine dialog. Run the Post Process command and set a file name and location for saving. Generate the NC code and select the option to Open G-Code in the SOLIDWORKS CAM NC Editor. Review the NC code within the SOLIDWORKS CAM NC Editor.
Lesson
2 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?
Use the Edit Definition command to optimize a roughing operation to increase toolpath efficiency and reduce machine cycle time. Modify the optimization of a rough mill operation. Set optimization method to shortest path. Set start point options. Simulate the toolpath to examine results.
Lesson
4 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?
Reorder operations manually to optimize the machining workflow. Perform manual operation reordering via drag and drop. Reorder multiple features using multiselect.
Lesson
4 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?
Create operation plans to define the tools and operations for machining the parts features. Generate operation plans for all machinable features. Review the operations in the CAM Operation Tree. Examine an individual operation strategy, tool selection and operation information. Review and resolve operation warnings.
Lesson
4 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?
Create operation plans to define the tools and operations for machining the parts features. Generate operation plans for all machinable features. Review the operations in the CAM Operation Tree. Examine an individual operation strategy, tool selection and operation information. Review and resolve operation warnings.
Lesson
4 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?
Use the New Avoid Area command on an operation to designate an area not to be machined. Create avoid areas on a face mill operation using the 2D sketches in the part. Examine the avoid areas by expanding the face mill operation.
Lesson
4 lata temu
Usuń lekcję
Czy na pewno chcesz usunąć tę lekcję?
Usuń ścieżkę nauki
Czy na pewno chcesz usunąć tę ścieżkę nauki?
Usuń kurs internetowy eCourse
Czy na pewno chcesz usunąć ten kurs internetowy eCourse?