基本的な整列断面図、オフセット断面図、部分断面図、半断面図を作成します。これには、スコープと拡張プロパティが含まれます。 図面に複数のタイプの断面図を追加する。 断面図のプロパティを定義する。 断面図を修正する。
Lesson
1 年 前
既存のビューに、ユーザー定義の注記、幾何公差、ブロックなどのアノテート アイテムを追加します。 アノテート アイテムとシンボルを作成する。 ジオメトリと注記からブロックを作成する。 ブロックをファイルに保存する。 ブロックを図面に挿入する。
Lesson
1 年 前
アセンブリ モデルの操作で使用する図面ビュー コマンドを使用します。部分断面、代替位置ビュー、分解図などのコマンドがあります。 アセンブリ構成を表す図面ビューのプロパティを使用する。 部分断面図を作成して、アセンブリの内部構成部品を表示する。 既存のコンフィギュレーションや新しいコンフィギュレーションを使用して、代替位置ビューを作成する。 分解したアセンブリ図面ビューを作成する。
Lesson
2 年 前
Review a variety of 3D solid modeling tools exclusively for DraftSight Premium. Learn to use some common 3D tools to create simple primitive shapes and complex custom 3D geometries. Create 3D basic geometric forms such as Box, Wedge, Cylinder, Sphere, and Torus. Generate sketch-based or complex 3D shapes using Extrude, Revolve, Sweep, PolySolid, Push and Pull, and Loft.
Lesson
2 年 前
Get the models closer to the finished geometry by learning to modify, remove, combine, slice or replicate the 3D geometries. Use Boolean operations such as Union and Subtract. Reshape the edges of 3D geometries using Fillet Edges or Chamfer Edges with different options. Remove or split the material of 3D geometries using the Slice tool Replicate geometry in multiple instances throughout the design with Mirror 3D and Pattern 3D
Lesson
2 年 前
各ビデオの 日本語 テキストを表示するには、レッスン画面の左下隅にある字幕を有効にします。 これは、レッスンごとに行う必要があります。 SOLIDWORKS 図面の基本を学習し、図面ビュー、BOM テーブル、バルーンを追加します。 このレッスンでは、以下のことを行います。 ビュー パレットを使用して図面ビューを追加する。 断面図と部分拡大図を作成する。 部品からモデル寸法を挿入する。 部品表テーブルを追加する。 バルーンを自動的に作成する。
Lesson
1 年 前
Define an accurate 2D profile or sketch using Geometric and/or Dimensional Constraints. Geometric Constraints create and uphold relationships between sketch entities while Dimensional Constraints specify distances or angles between the sketch entities. Assign Geometric Constraints such as Horizontal, Vertical, Coincident, Perpendicular, Parallel, Tangent, etc. Create Dimensional Constraints with numeric values with labels. Manage Dimensional Constraints for edit, delete and create user-defined parameters.
Lesson
2 年 前
Manipulate the 3D Model view properly to work on the geometry as intended. Use a variety of tools to enable rotating the model freely, updating the model view type and to add custom coordinates systems to get the right location and angle. View the 3D model at different angles such as Top, Bottom, Left and various isometric angles. Use the computer mouse or orbit command to freely pan, zoom and rotate the 3D model. Learn to view with different view types such as Wireframe, Hidden, Gouraud, Flat with Edges, etc. Setup custom coordinates systems with CCS defining based on a view or entity.
Lesson
2 年 前
既存の図面ビューに寸法を挿入して操作します。 モデルから寸法をインポートして、ユーザー定義の駆動寸法を作成して、ビューの間で寸法を移動します。 駆動寸法を追加して操作する。 駆動寸法を作成する。 寸法のプロパティを編集する。
Lesson
1 年 前
Create some very complex 3D surfaces or geometries by defining a mesh with custom contours and numerous editable points for better control and design. Create basic primitive mesh shapes as a starting point to the design. Generate individual mesh faces using 3D Face tool. Control a network of mesh points by defining an outer perimeter with the Edge Mesh tool to fill it in. Use the 3D Mesh command allowing to define the location of every point in a mesh.
Lesson
2 年 前
既存の部品ファイルから図面を作成し、基本ビューを追加して、寸法や吹き出しを追加/操作します。 部品の基本図面を作成する。 標準を挿入する。 モデルから図面に寸法をインポートする。 寸法を修正する。 モデルと図面の間の関連性を示す。
Lesson
5 月 前