Use the ConfigurationManager to add configurations to an assembly and show two versions of its components. Also, explore the advanced options of configuration properties. Use the ConfigurationManager to add configurations to an assembly. Use the advanced options of the configuration properties to control new components and mates. Create two versions of the assembly to represent different available components.
Lesson
5 months ago
Make changes to route geometry using 3D sketches. Edit routes by deleting, trimming, and adding sketch geometry. Delete existing fittings and add replacements fittings. Edit existing routes. Delete existing fittings. Add replacement fittings.
Lesson
1 year ago
Understand the characteristics of a large assembly, how SOLIDWORKS opens an assembly, and what can cause it to slow down. Also, a quick look at some possible solutions. Explore what makes a large assembly. Learn the sequence of steps SOLIDWORKS uses to open an assembly. Discover some common large assembly slowdowns.
Lesson
1 year ago
Animate an assembly from a first-person perspective. Create walkthrough animations. Position the camera throughout the animation sequence. Align the camera to a sketch path throughout the animation sequence. Save animations as AVI files.
Lesson
2 years ago
Use the Tooling Split command to create interlock surfaces around the perimeter of the parting surfaces to create mold tooling. Save mold bodies and create assemblies of molds. Create assembly files for mold from part files. Create exploded assembly view of mold. Create interlocking surfaces on molds using the tooling split command.
Lesson
2 years ago
Create exploded views in multibody parts using some of the same tools that you use to create an exploded view in an assembly. Toggle between exploded and collapsed states. Edit the explode steps. Create more than one exploded view per configuration.
Lesson
2 years ago
A SpeedPak configuration improves performance of large assemblies by simplifying the assembly without losing its file references. Create SpeedPak configurations. Use SpeedPak configurations in higher level assemblies. Understand the benefits and limitations of using a SpeedPak configuration.
Lesson
2 years ago
Use the Interference Detection tool to identify any overlap between parts in an assembly. Clearance between parts can also be detected using the Clearance Verification tool. Use the Interference Detection tool to identify interferences between assembly components. Explore the options available within the Interference Detection tool. Use the Clearance Verification tool to identify clearances between assembly components. Explore the options available with the Clearance Verification tool.
Lesson
5 months ago
Explore the various methods for moving and rotating components, including dragging, using the triad, and setting the options in the PropertyManager. Explore the options for detecting collisions between components. Calculate the minimum clearance distance between components. Move and rotate a component by dragging, using the triad, or using the options in the PropertyManager. Identify the clearance between options when moving components. Detect collisions between moving components and other components.
Lesson
5 months ago
Add fasteners from the Toolbox library to the hole wizard holes and cylindrical cuts on selected faces or to an entire assembly. Add a sensor to monitor property values. Set up an alert to notify you if the property value is outside acceptable limits. Automatically add fasteners to an assembly. Edit the settings for the default fasteners. Edit existing fasteners. Add washers and nuts to secure fasteners.
Lesson
1 year ago
Edit a pipe route relative to the pipe's geometry (either centerline or external surface). Coverings can also be added to pipes. Create a route relative to an existing surface. Add coverings to pipes. Change where dimensions are assigned relative to the pipe (centerline or external surface).
Lesson
2 years ago
Use bill of materials (BOM) tables to call out the components of an assembly. Bill of materials can be modified in many ways and new table templates can be generated to save customizations. Tabulated bill of materials can list information about multiple configurations within the same table. Create a bill of materials for an assembly. Modify a bill of materials table to add and reorder column. Save a bill of materials as a template. Create a tabulated bill of materials.
Lesson
5 months ago
Create a spring using a sweep feature defined in the context of an assembly. Then, animate the spring by adding a linear motor in MotionManager. Create an animation. Model a spring using an in-context sweep. Add a linear motor to stretch and compress the spring. Understand the impact of rebuild errors on animations.
Lesson
1 year ago
Identify interfering components and adjust mates to repair the assembly for the Certified SOLIDWORKS Professional sample exam. Find the center of mass of an assembly relative to a coordinate system. Insert and mate a new component. Use the Interference Detection tool to identify interferences between components.
Lesson
3 months ago
Add additional components to the assembly for the Certified SOLIDWORKS Professional sample exam. Download and insert components into the assembly. Add mates to position the components. Move the components using Collision Detection. Measure the angle between two edges.
Lesson
1 year ago
Edit the values of distance, angle, and limit mates. Add distance and angle mates according to the specifications in a drawing table. Edit the values of the distance and angle mates that you create.
Lesson
2 years ago
Move the components within a sub-assembly using flexible sub-assemblies. Modify the component properties of a sub-assembly to change it from rigid to flexible. Drag components of a flexible sub-assembly in the main assembly to observe their motion. Learn about the impact that flexible sub-assemblies have on overall assembly performance.
Lesson
2 years ago
Add each of the six mechanical mate types to control the degrees of freedom of components when designing mechanisms. Mate a cylinder, plane, or point to a series of tangent faces with a cam follower mate. Limit the rotational movement between two components with a hinge mate. Move one component linearly to move another component rotationally with a rack and pinion mate. Add a pitch relation between the rotation of one component and the translation of another with a screw mate. Rotate two components relative to one another with a gear mate or a universal joint mate.
Lesson
1 year ago
Constrain a point or a vertex of a component to a path in an assembly. Then, control the pitch, yaw, and roll of the component as it moves along the path. Specify the entities for a path mate. Edit a path mate to control pitch, yaw, and roll of the component.
Lesson
1 year ago
Center a component relative to two faces of a groove using a width mate. Add a width mate to center a component relative to two faces of another component. Understand the degrees of freedom that are constrained by a width mate.
Lesson
1 year ago
The Belt/Chain assembly feature links idlers, pulleys, or sprockets together to achieve the intended rotation of several components simultaneously. Optionally, you can create a belt or chain component part. Select edges of pulleys and idlers for a belt/chain assembly feature. Set the properties of a belt/chain assembly feature.
Lesson
1 year ago
Mirror Component creates opposite-hand, but otherwise identical, versions of parts or subassembies. Specify which components are mirrored and which are purely copied (i.e. fasteners, which should not be mirrored). The geometry of a mirrored component changes to create a truly mirrored version, known as an "opposite-hand" version. Mirror components about an assembly plane. Create mirrored versions of parts in an assembly. Create opposite-hand versions of parts.
Lesson
1 year ago
Blocks group sketch entities and dimensions together so that they move as one in a sketch. Together with a layout sketch, you can go directly from an assembly sketch to the full assembly. Create, edit and save blocks. Create a layout sketch of an assembly using blocks. Build assembly components based on the existing blocks.
Lesson
2 years ago
Create display states to control the visibility and display style of components. Display states can be linked to configurations of an assembly. Display states can control hide/show state, display mode, appearance, and transparency of components. Add display states to an assembly. Modify visual properties of components with display states. Explore component selection techniques. Use the display pane. Open an assembly to a specific configuration and display state. Link display states to configurations.
Lesson
2 years ago