了解如何使用子建模来分析大型装配体的一部分以节省时间并获得更准确的结果。 从父算例创建子模型算例。 了解载荷如何自动转移到子模型算例中。 节省时间和计算资源的同时保持准确的结果。 使用 eDrawings 来保存结果。
Lesson
2 月 前
Setup, run and postprocess a harmonic simulation. Understand and practice the frequency domain excitation definition. Practice postprocessing results from the harmonic study. Setup, run and postprocess a harmonic study Use the mass participation factor to select a sufficient number of natural frequencies Optimize the finite element mesh for dynamic simulation Define the harmonic load in the frequency domain Postprocess results from the harmonic study
Lesson
3 月 前
Setup, run and postprocess a dynamic simulation with the base motion shock excitation. Understand the optimum mesh design, and get more familiar with the estimation of the minimum number of natural frequencies. Understand the basics of damping. Setup, run and postprocess a transient study Define base excitation shock load Use the mass participation factor to select a sufficient number of natural frequencies Optimize the finite element mesh for dynamic simulation Define structural damping Calculate the maximum time step Use remote mass to simplify the model
Lesson
3 月 前
Setup initial dynamic simulation, solve and postprocess the results. Understand the importance of natural frequencies in dynamic simulations. Compare the dynamic and static results. Setup, run and postprocess a basic transient study Calculate a sufficient number of natural frequencies Use the mass participation factor to estimate a sufficient number of natural frequencies Run dynamic simulation for slow and fast forces, and compare their results
Lesson
3 月 前
Review the basic functionality of the SOLIDWORKS Dynamics module. Show activation of SOLIDWORKS Simulation Add-In. Review the available modules for specific dynamic load times.
Lesson
3 月 前
了解如何在考虑辐射、传导和对流的同时进行热分析。 通过考虑传导、对流和辐射的影响来获得准确的热结果。 测量温度和热通量。
Lesson
3 月 前
了解如何使用负载案例管理器组合不同配置中的荷载。 了解不同载荷条件的组合效果如何影响您的设计。 将动载和恒载组合到您的分析中。 使用方程式可以方便地组合载荷。
Lesson
3 月 前
本系列介绍接触层次结构、引脚连接器和弹簧连接器。 将材料应用到引脚连接器以分析强度。 使用预载创建弹簧以考虑弹簧张力。 使用接触层次结构来控制接触。
Lesson
3 月 前
本模块通过观察元素大小如何影响应力、应变和位移介绍网格收敛的概念。 了解更改全局元素大小将如何影响结果。 了解如何在指定位置应用网格控制。 观察锐圆角如何产生应力集中。
Lesson
3 月 前
了解如何使用疲劳模块在反复的载荷条件下分析结构。 将 S-N 曲线应用到材料以进行反复的载荷分析。 应用修正因子以获得更切合实际的结果。 查看损坏图解以分析材料寿命。
Lesson
3 月 前
本系列介绍接触、螺栓和远程载荷的概念。 分析装配体内的接触。 通过排除可以使用连接器和远程载荷表示的零件来简化模型。
Lesson
3 月 前
本模块介绍 Simulation 用户界面并指导您完成简单零件的设置流程。然后,将运行模拟并分析结果。 了解 Simulation 用户界面。 应用夹具、材料和载荷。 运行模拟并分析模型的应力和位移。
Lesson
3 月 前
了解在分析装配体结构的固有振动时如何使用接触。 分析装配体结构的固有频率形状和模式。 测试各种接触条件以分析结构刚度。
Lesson
1 年 前
了解如何使用壳体来对薄壁结构建模。 使用壳体管理器在薄壁结构上创建壳体。 应用对称夹具以减少计算工作量。
Lesson
1 年 前
Examine the motion of a catapult as it is loaded and throws a projectile. Add solid bodies contact, add a spring and apply friction. Determine torque required to rotate the crank and load the catapult. Determine the displacement of the loading spring. Study the effect of contact friction on the motion of the projectile.
Lesson
2 年 前
SOLIDWORKS Motion is a virtual prototyping tool for engineers and designers interested in understanding the performance of their assemblies. Perform a basic motion analysis using SOLIDWORKS Motion. Simulate the weight of a vehicle on the jack. Determine toque and power required to lift it.
Lesson
2 年 前
Mesh the Flow Simulation geometry using manual meshing approach. Control Basic mesh settings. Apply manual mesh setting and options. Define control planes. Define and apply local mesh controls. Plot mesh on cut plots.
Lesson
2 年 前
Mesh the Flow Simulation geometry using automated meshing approach. Understand the Basic mesh, and Initial mesh concepts. Control the Global Initial mesh refinement level. Analyze the Minimum Gap Size feature value as the project settings change. Plot mesh on cut plots.
Lesson
2 年 前
Run SOLIDWORKS Flow simulation and monitor it. Postprocess Flow simulation results. Launch the SOLIDWORKS Flow simulation and monitor it in the solver window. Monitor execution of the simulation in the solver window. Postprocess results using cut plots, surface plots, flow trajectories. Create 2D graphs from the calculated results, extract results on desired geometrical entities.
Lesson
2 年 前
Build the SOLIDWORKS Flow Simulation project. Use Wizard to define Flow Simulation project. Define boundary conditions. Define goals. Mesh the model geometry.
Lesson
2 年 前
Prepare SOLIDWORKS geometry for Flow Simulation analysis. Create lids manually. Create lids using the Lid Creation tool. Check if the geometry is water tight for internal flow analysis. Detect leaks in improperly sealed geometry.
Lesson
2 年 前
Learn about SOLIDWORKS Flow Simulation software. View sample applications from the real world. View sample real world examples where the software was used.
Lesson
2 年 前
通过浏览所有模块了解 SOLIDWORKS Simulation 产品套件。 使用 SOLIDWORKS Flow 分析热传递和流体流动。 使用 Sustainability 减小设计的环境影响。 使用 SOLIDWORKS Simulation 了解应力-应变分析。 使用 SOLIDWORKS Motion 分析刚性几何体动力学。 使用 SOLIDWORKS Plastics 查看注塑零件的填充阵列。
Lesson
2 年 前
Simulate a mechanism placing an object into a box and a cover on the box. Apply servo motors. Add proximity sensors. Create and run event based motion study.
Lesson
2 年 前