Define default tolerance values to ensure manufactured product falls within specification as drawings often don't have explicit tolerance values associated with them: Manually edit tolerance value. Set default tolerances.
Lesson
4 Jahre Vor
Use the New Avoid Area command on an operation to designate an area not to be machined. Create avoid areas on a face mill operation using the 2D sketches in the part. Examine the avoid areas by expanding the face mill operation.
Lesson
4 Jahre Vor
Create operation plans to define the tools and operations for machining the parts features. Generate operation plans for all machinable features. Review the operations in the CAM Operation Tree. Examine an individual operation strategy, tool selection and operation information. Review and resolve operation warnings.
Lesson
4 Jahre Vor
Create operation plans to define the tools and operations for machining the parts features. Generate operation plans for all machinable features. Review the operations in the CAM Operation Tree. Examine an individual operation strategy, tool selection and operation information. Review and resolve operation warnings.
Lesson
4 Jahre Vor
Run a toolpath simulation to examine material removal. Run a toolpath simulation. Control the toolpath simulation. Utilize display options.
Lesson
4 Jahre Vor
Reorder operations manually to optimize the machining workflow. Perform manual operation reordering via drag and drop. Reorder multiple features using multiselect.
Lesson
4 Jahre Vor
Use the Sort Operations command to automatically reorder operations. Examine sort operations process options. Set sort by order for operation type.
Lesson
4 Jahre Vor
Use the Edit Definition command to modify roughing operations. Change pocketing pattern. Set side parameters. Set depth parameters.
Lesson
4 Jahre Vor
Duplicate dimensions are often grouped together on a drawing but might need to be inspected separately: Extract and identify the quantity. Change the quantity. List characteristics separately.
Lesson
4 Jahre Vor
It is important, when creating an inspection report, that the items are ballooned in the correct order. Also numbering schemes can help quickly identify characteristics: Change the order of the characteristics. Define balloon sequences. Manually change a balloon number.
Lesson
4 Jahre Vor
Use the Edit Definition command to optimize a roughing operation to increase toolpath efficiency and reduce machine cycle time. Modify the optimization of a rough mill operation. Set optimization method to shortest path. Set start point options. Simulate the toolpath to examine results.
Lesson
4 Jahre Vor
SustainabilityXpress schätzt den Kohlenstoff-Fußabdruck eines Modells, die während seiner Lebensdauer verbrauchte Energie, die Luftansäuerung und die Überdüngung von Gewässern. Informationen wie das verwendete Material, der Fertigungsprozess, die Herstellungsregion, das Verwendungsgebiet und das Ende der Lebensdauer werden analysiert. Erfahren Sie, wie sich unterschiedliche Materialien und Fertigungsprozesse auf die Umweltverträglichkeit einer Konstruktion auswirken. Geben Sie Informationen zur Produktverwendung an, um die Werte für den Transport und des Ende der Lebensdauer zu bestimmen. Erfahren Sie mehr über die Informationen, die in den Diagrammen zur Umweltverträglichkeit angezeigt werden. Erfahren Sie, wie Sie einen Bezugswert für die Umweltverträglichkeit festlegen, mit dem Änderungen verglichen werden können. Erstellen Sie einen Bericht zur Sustainability Ausgabe.
Lesson
3 Jahre Vor
Erstellen, bearbeiten und speichern Sie benutzerdefinierte Vorlagen für Leitungsführungsbaugruppen unter Verwendung einer vorhandenen Vorlage für Leitungsführungsbaugruppen. Erstellen und speichern Sie eine benutzerdefinierte Vorlage für Leitungsführungsbaugruppen. Geben Sie verschiedene Entwurfsnormen, Einheiten und andere Dokumenteigenschaften als Standardwerte an, die verwendet werden, wenn Sie eine neue Leitung mit der benutzerdefinierten Vorlage erstellen.
Lesson
3 Jahre Vor
Fügen Sie ein Reduzier-T-Stück für den Auslass in eine vorhandene Leitung ein und richten Sie es mithilfe von Tastenkombinationen und einer Triade aus. Verbinden Sie die aus dem zusätzlichen Feature resultierenden Rohre mithilfe des Werkzeugs „Automatische Leitungserstellung“. Fügen Sie in den vorhandenen Leitungen Inline-Rohrverbindungen hinzu. Verwenden Sie Tastenkombinationen und die Triade für die Ausrichtung und Positionierung einer Inline-Rohrverbindung.
Lesson
3 Jahre Vor
Verbinden Sie vorhandene Komponenten mithilfe von orthogonalen Leitungen und Standardverbindungen aus der Bibliothek. Verwenden Sie das Feature für die automatische Leitungserstellung, um Leitungen automatisch zu erzeugen. Fügen Sie den Baugruppen Standardverbindungen hinzu. Erstellen Sie orthogonale Leitungen zwischen Features.
Lesson
3 Jahre Vor
Review the difference between small displacement linear, and large displacement nonlinear analyses. Introduce the concept of time curves, and discuss basic options. Solve small displacement linear analysis to demonstrate inaccurate solution. Define a nonlinear simulation study. Use time curves to control variation of the nonlinear loading. Use fixed increment stepping, and autostepping stepping procedures to solve the nonlinear problem. Postprocess results of the nonlinear simulation. Compare results from nonlinear studies with various setup parameters.
Lesson
3 Jahre Vor
Introduction to the force control and displacement control methods in nonlinear module. Experience and resolve solution instabilities when solving nonlinear problems. Define nonlinear study boundary conditions and loads. Stabilize force control method to arrive to a final solution. Solve the problem using the displacement control method. Adjust boundary conditions for the displacement control method. Compare nonlinear results from the force control, and the displacement control methods.
Lesson
3 Jahre Vor
Introduction to the material nonlinearity, namely metal plasticity. Effect of mesh quality on the quality of the numerical stress results. Solve problem with linear small displacement solution and identify a need for the nonlinear solution due to high stress. Define nonlinear study boundary conditions and loads. Define nonlinear material model with von Mises plasticity. Use simplified bi-linear plasticity material model. Review the stress and displacement results at various times. Study effect of mesh quality on the quality of the stress results. Use the mesh sectioning feature to review stress distribution within the bodies.
Lesson
3 Jahre Vor
Use the Post Process command to generate NC code from the parts toolpath and operation information. Select the post processor within the machine dialog. Run the Post Process command and set a file name and location for saving. Generate the NC code and select the option to Open G-Code in the SOLIDWORKS CAM NC Editor. Review the NC code within the SOLIDWORKS CAM NC Editor.
Lesson
2 Jahre Vor
Blöcke fassen Skizzenelemente und Bemaßungen zusammen, damit sie in einer Skizze als Einheit verschoben werden. Zusammen mit einer Layout-Skizze können Sie direkt von einer Baugruppenskizze zu einer vollständigen Baugruppe gehen. Erstellen, Bearbeiten und Speichern von Blöcken Erstellen Sie eine Layout-Skizze einer Baugruppe mithilfe von Blöcken. Erstellen Sie Baugruppenkomponenten auf Basis der vorhandenen Blöcke.
Lesson
2 Jahre Vor
Use the edit definition command to modify contouring (finish) operations. Review contour operation parameters. Review side parameters settings. Review feeds and speeds tab.
Lesson
2 Jahre Vor
Use the Edit Definition command to modify contouring operation leadin and leadout parameters. Modify leadin type. Modify leadin amount and overlap. Modify arc radius and arc angle.
Lesson
2 Jahre Vor
Use Interactive Feature Regognition (IFR) to manually create a machinable feature. Create a corner slot feature using the 2.5 axis feature command. Review geometry selection options to define the feature. Set the feature end condition. Modify the machining strategy for the feature.
Lesson
2 Jahre Vor
Use the Combine Operations and Link Operation commands to combine like operation types. Combine operations for all like rough and contour mill operations. Drag and drop a hole feature from one center drill operation to a like center drill operation. Link like contour mill operations between two different setups.
Lesson
2 Jahre Vor