大きなアセンブリの一部を解析することで時間を節約し、サブモデリングにより正確な結果を得る方法を学びます。 親スタディからサブモデル スタディを作成する。 負荷が自動的にサブモデル スタディに伝わるようすを確認する。 時間と処理リソースを節約しながら、正確な結果を得る。 eDrawings を使用して結果を保存する。
Lesson
3 月 前
Setup, run and postprocess a harmonic simulation. Understand and practice the frequency domain excitation definition. Practice postprocessing results from the harmonic study. Setup, run and postprocess a harmonic study Use the mass participation factor to select a sufficient number of natural frequencies Optimize the finite element mesh for dynamic simulation Define the harmonic load in the frequency domain Postprocess results from the harmonic study
Lesson
3 月 前
Setup, run and postprocess a dynamic simulation with the base motion shock excitation. Understand the optimum mesh design, and get more familiar with the estimation of the minimum number of natural frequencies. Understand the basics of damping. Setup, run and postprocess a transient study Define base excitation shock load Use the mass participation factor to select a sufficient number of natural frequencies Optimize the finite element mesh for dynamic simulation Define structural damping Calculate the maximum time step Use remote mass to simplify the model
Lesson
3 月 前
Setup initial dynamic simulation, solve and postprocess the results. Understand the importance of natural frequencies in dynamic simulations. Compare the dynamic and static results. Setup, run and postprocess a basic transient study Calculate a sufficient number of natural frequencies Use the mass participation factor to estimate a sufficient number of natural frequencies Run dynamic simulation for slow and fast forces, and compare their results
Lesson
3 月 前
Review the basic functionality of the SOLIDWORKS Dynamics module. Show activation of SOLIDWORKS Simulation Add-In. Review the available modules for specific dynamic load times.
Lesson
3 月 前
このモジュールでは、要素のサイズによる応力、ひずみや変位への影響を確認して、メッシュ収束の概念を学びます。 グローバル要素サイズの変更が結果にどのように影響するかを学ぶ。 指定の位置にメッシュ コントロールを適用する方法を学ぶ。 シャープ コーナーが応力の集中を生むようすを確認する。
Lesson
3 月 前
このモジュールでは、Simulation のユーザー インターフェースと、単純な部品のセットアップ プロセスを紹介します。それからシミュレーションを実行して、結果を解析します。 Simulation のユーザー インターフェースについて学ぶ。 拘束、材料、荷重を適用する。 シミュレーションを実行して、モデルの応力と変位を解析する。
Lesson
3 月 前
薄厚構造のモデルにシェルを使用する方法を学びます。 シェル マネージャーを使用して、薄厚構造にシェルを作成する。 処理の負荷を軽減するため、対称拘束を適用する。
Lesson
1 年 前
Examine the motion of a catapult as it is loaded and throws a projectile. Add solid bodies contact, add a spring and apply friction. Determine torque required to rotate the crank and load the catapult. Determine the displacement of the loading spring. Study the effect of contact friction on the motion of the projectile.
Lesson
2 年 前
SOLIDWORKS Simulation 製品について、すべてのモジュールを学習します。 SOLIDWORKS Flow を使用して熱伝導と流体フローを解析する。 Sustainability を使用して設計の環境に与える影響を軽減する。 SOLIDWORKS Simulation を使用した応力/ひずみ解析を学ぶ。 SOLIDWORKS Motion を使用してリジッド ボディ ダイナミクスを解析する。 SOLIDWORKS Plastics を使用したプラスチック射出パーツのフィル パターンを見る。
Lesson
2 年 前
Simulate a mechanism placing an object into a box and a cover on the box. Apply servo motors. Add proximity sensors. Create and run event based motion study.
Lesson
2 年 前
Generate a cam profile based on an input follower displacement from a data set. Define a motion of a follower using Data Points. Generate a cam profile using Trace Path. Verify the generated cam profile.
Lesson
2 年 前
設計を最適化し、モデル寸法を変更してモデル重量を減らす方法を学びます。 パラメーターと拘束を適用して、目標に合わせて設計を最適化する。 シミュレーションでのデザイン スタディの使用方法を学ぶ。
Lesson
3 年 前
Introduction to the material nonlinearity, namely metal plasticity. Effect of mesh quality on the quality of the numerical stress results. Solve problem with linear small displacement solution and identify a need for the nonlinear solution due to high stress. Define nonlinear study boundary conditions and loads. Define nonlinear material model with von Mises plasticity. Use simplified bi-linear plasticity material model. Review the stress and displacement results at various times. Study effect of mesh quality on the quality of the stress results. Use the mesh sectioning feature to review stress distribution within the bodies.
Lesson
3 年 前
Introduction to the force control and displacement control methods in nonlinear module. Experience and resolve solution instabilities when solving nonlinear problems. Define nonlinear study boundary conditions and loads. Stabilize force control method to arrive to a final solution. Solve the problem using the displacement control method. Adjust boundary conditions for the displacement control method. Compare nonlinear results from the force control, and the displacement control methods.
Lesson
3 年 前
Review the difference between small displacement linear, and large displacement nonlinear analyses. Introduce the concept of time curves, and discuss basic options. Solve small displacement linear analysis to demonstrate inaccurate solution. Define a nonlinear simulation study. Use time curves to control variation of the nonlinear loading. Use fixed increment stepping, and autostepping stepping procedures to solve the nonlinear problem. Postprocess results of the nonlinear simulation. Compare results from nonlinear studies with various setup parameters.
Lesson
3 年 前
Review the basic functionality of the SOLIDWORKS Nonlinear module. Show activation of SOLIDWORKS Simulation Add-In. Learn three basic nonlinear phenomena in engineering calculations. Review of control methods available in the module. Review of basic material models available in the module.
Lesson
3 年 前