瞭解如何以建立子模型的方式分析較大組合件中的一部分,以節省時間並取得較精確的結果。 從父系研究中產生子模型研究。 探索如何將負載自動轉移至子模型研究。 節省時間和計算資源,同時保持精確的結果。 使用 eDrawings 儲存結果。
Lesson
2 月 前
Setup, run and postprocess a harmonic simulation. Understand and practice the frequency domain excitation definition. Practice postprocessing results from the harmonic study. Setup, run and postprocess a harmonic study Use the mass participation factor to select a sufficient number of natural frequencies Optimize the finite element mesh for dynamic simulation Define the harmonic load in the frequency domain Postprocess results from the harmonic study
Lesson
2 月 前
Setup, run and postprocess a dynamic simulation with the base motion shock excitation. Understand the optimum mesh design, and get more familiar with the estimation of the minimum number of natural frequencies. Understand the basics of damping. Setup, run and postprocess a transient study Define base excitation shock load Use the mass participation factor to select a sufficient number of natural frequencies Optimize the finite element mesh for dynamic simulation Define structural damping Calculate the maximum time step Use remote mass to simplify the model
Lesson
2 月 前
Setup initial dynamic simulation, solve and postprocess the results. Understand the importance of natural frequencies in dynamic simulations. Compare the dynamic and static results. Setup, run and postprocess a basic transient study Calculate a sufficient number of natural frequencies Use the mass participation factor to estimate a sufficient number of natural frequencies Run dynamic simulation for slow and fast forces, and compare their results
Lesson
2 月 前
Review the basic functionality of the SOLIDWORKS Dynamics module. Show activation of SOLIDWORKS Simulation Add-In. Review the available modules for specific dynamic load times.
Lesson
2 月 前
瞭解如何執行熱分析,同時考量到輻射、傳導和對流。 考量傳導、對流和輻射的影響,來取得精確的熱結果。 測量溫度和熱通量。
Lesson
2 月 前
瞭解如何使用「負載情況管理員」合併不同模型組態中的負載。 探索不同負載條件的結合效果會如何影響您的設計。 將動負載和靜負載結合至分析。 使用數學關係式經鬆結合負載。
Lesson
2 月 前
此系列涵蓋接觸階層、銷連接器和彈簧連接器。 套用材質到銷連接器以分析強度。 產生含預載的彈簧以考量彈簧張力。 使用接觸階層以控制接觸。
Lesson
2 月 前
此單元可讓使用者觀察元素大小對應力、應變及位移的影響,以瞭解網格收斂的概念。 瞭解變更整體元素大小對結果有何影響。 探索如何在特定位置上套用網格控制。 查看尖銳角落如何產生應力集中。
Lesson
2 月 前
瞭解如何使用「疲勞」模組在重複的負載條件下分析結構。 套用 S-N 曲線至材質,以進行重複的負載分析。 套用修正係數以取得更貼近現實情況的結果。 檢視損害繪圖以分析材質壽命。
Lesson
2 月 前
此系列簡介接觸以及螺栓和遠端負載的概念。 分析組合件中的接觸。 免除可使用連接器和遠端負載表示的零件,從而簡化模型。
Lesson
2 月 前
此單元簡介 Simulation 使用者介面,並逐步引導簡單零件的設定程序。隨後執行模擬及分析結果。 瞭解 Simulation 使用者介面。 套用固定物、材質和負載。 執行模擬並分析應力和位移的模型。
Lesson
2 月 前
瞭解在分析組合件結構的自然振動時,可如何使用接觸。 分析組合件中,與共振頻率對應的模式形狀。 測試各種接觸條件以分析結構勁度。
Lesson
1 年 前
瞭解如何使用薄殼來建構薄型結構的模型。 使用薄殼管理員,在薄結構上產生薄殼。 套用對稱固定物以減少計算工作。
Lesson
1 年 前
Examine the motion of a catapult as it is loaded and throws a projectile. Add solid bodies contact, add a spring and apply friction. Determine torque required to rotate the crank and load the catapult. Determine the displacement of the loading spring. Study the effect of contact friction on the motion of the projectile.
Lesson
1 年 前
SOLIDWORKS Motion is a virtual prototyping tool for engineers and designers interested in understanding the performance of their assemblies. Perform a basic motion analysis using SOLIDWORKS Motion. Simulate the weight of a vehicle on the jack. Determine toque and power required to lift it.
Lesson
1 年 前
Mesh the Flow Simulation geometry using manual meshing approach. Control Basic mesh settings. Apply manual mesh setting and options. Define control planes. Define and apply local mesh controls. Plot mesh on cut plots.
Lesson
2 年 前
Mesh the Flow Simulation geometry using automated meshing approach. Understand the Basic mesh, and Initial mesh concepts. Control the Global Initial mesh refinement level. Analyze the Minimum Gap Size feature value as the project settings change. Plot mesh on cut plots.
Lesson
2 年 前
Run SOLIDWORKS Flow simulation and monitor it. Postprocess Flow simulation results. Launch the SOLIDWORKS Flow simulation and monitor it in the solver window. Monitor execution of the simulation in the solver window. Postprocess results using cut plots, surface plots, flow trajectories. Create 2D graphs from the calculated results, extract results on desired geometrical entities.
Lesson
2 年 前
Build the SOLIDWORKS Flow Simulation project. Use Wizard to define Flow Simulation project. Define boundary conditions. Define goals. Mesh the model geometry.
Lesson
2 年 前
Prepare SOLIDWORKS geometry for Flow Simulation analysis. Create lids manually. Create lids using the Lid Creation tool. Check if the geometry is water tight for internal flow analysis. Detect leaks in improperly sealed geometry.
Lesson
2 年 前
Learn about SOLIDWORKS Flow Simulation software. View sample applications from the real world. View sample real world examples where the software was used.
Lesson
2 年 前
探索所有模組以瞭解 SOLIDWORKS Simulation 產品套件。 使用 SOLIDWORKS Flow 分析熱傳遞和流體流動。 使用 Sustainability 減少設計對環境的影響。 使用 SOLIDWORKS Simulation 探索應力-應變分析。 使用 SOLIDWORKS Motion 分析剛性本體動態。 使用 SOLIDWORKS Plastics 檢視塑膠射出零件的填補複製排列。
Lesson
2 年 前
Simulate a mechanism placing an object into a box and a cover on the box. Apply servo motors. Add proximity sensors. Create and run event based motion study.
Lesson
2 年 前