Utilize functions of the Costing Task Pane and CostingManager tab to analyze the cost of manufacturing a sheet metal part. Use the Costing Task Pane to evaluate materials costs. Learn how to customize material options for material and blank size. Use the Costing Manager to evaluate manufacturing costs. Learn how to customize cost values for manufacturing. Understand the values displayed in the Estimated Cost Per Part. Generate a cost analysis report.
Lesson
2 years ago
ENG
JPN
Verify that a model is symmetric. This is helpful for splitting a part into the smallest symmetrical body for simulation analysis. Evaluate a model for symmetry. Understand the options and results within the Symmetry Check tool. Split a part into the smallest symmetrical body for use in simulation analysis.
Lesson
2 years ago
ENG
JPN
Select features or elements of a particular type so that they may be acted upon in one operation. Operations include appearance changes, suppression changes, and more. Bulk-select by feature type. Understand the options and search criteria of the Power Select tool.
Lesson
2 years ago
ENG
JPN
Check for sharp edges, sliver faces, discontinuous geometry and more. This affords you the opportunity to fix these issues before finalizing a design. Check a model for insignificant geometry, sliver faces, sharp edges, and discontinuous geometry. Specify search criteria.
Lesson
2 years ago
ENG
JPN
Specify, identify, and locate features based on selection criteria so you can modify all of the features, simplify the model by suppressing the features, and create a simplified configuration. Locate and identify features based on specified criteria. Modify selected features in one operation. Create a simplified configuration.
Lesson
2 years ago
ENG
JPN
Create a side core with draft from sketches on molds with trapped molding areas. Use feature freeze bar to exclude features from being rebuilt. Create side cores on molds. Exclude features from being rebuilt.
Lesson
2 years ago
ENG
JPN
Create parting surfaces using parting lines by separating mold cavity faces from mold core faces using the parting surfaces tool. Create parting surfaces at the parting line that are perpendicular to the direction of pull. Explore the options of a parting surface.
Lesson
2 years ago
ENG
JPN
Use the Shut-off surfaces tool to close open molding areas in a part to cut the tooling block into two pieces. Identify open molding areas in the part. Utilize the Shut-off Surfaces tool to close open molding areas. Understand when shut-off surfaces are required.
Lesson
2 years ago
ENG
JPN
Determine if proper draft exists in a part to be molded. Without proper draft, the part may fail to successfully eject from the mold. Evaluate draft on a molded part. Examine the different classes of drafted faces.
Lesson
2 years ago
ENG
JPN
Use drawing view commands that are specific to working with assembly models including broken out section views, alternate position views, and exploded views. Use drawing view properties to represent assembly configurations. Create a broken-out section view to show internal components of the assembly. Create an alternate position view using an existing or a new configuration. Create an exploded assembly drawing view.
Lesson
2 years ago
ENG
JPN
Modify sketches and reorder features in the sample part provided for the Certified SOLIDWORKS Professional sample exam. Modify sketches to change the profile of an extruded boss. Reorder features while respecting parent/child relations. Obtain the mass properties of the part.
Lesson
2 years ago
ENG
Create display states to control the visibility and display style of components. Display states can be linked to configurations of an assembly. Display states can control hide/show state, display mode, appearance, and transparency of components. Add display states to an assembly. Modify visual properties of components with display states. Explore component selection techniques. Use the display pane. Open an assembly to a specific configuration and display state. Link display states to configurations.
Lesson
2 years ago
ENG
JPN
By looking at the transitions between spiral surfaces and adjacent surfaces, you can understand the three types of continuity present in CAD systems. Identify C0 (contact), C1 (tangent), and C2 (curvature) continuity.
Lesson
2 years ago
ENG
JPN
SOLIDWORKS includes many tools for evaluating part geometry. By analyzing the curvature of a parts curves and surfaces, you can evaluate the quality of transitions between features and the surfaces themselves. Understand what curvature is. Display Curvature to use colors to evaluate the surfaces of a model. Use Curvature Combs to evaluate sketch curves. Learn how to display the minimum radius and inflection points of a curve. Use zebra stripes to simulate reflections on faces of a model. Understand how to use evaluate tools to recognize tangency and curvature continuous conditions.
Lesson
2 years ago
ENG
JPN
When the internal cut features of a model are of most importance in a design, one approach is to create solid features that represent the negative space of a part. Once the negative space is complete, the Combine command can be used to subtract the volume from another solid body. Use solid geometry representing the interior space of a manifold to create the negative space of the part. Create a separate solid body surrounding the geometry as the main body of the manifold. Combine the solid bodies in the part using a subtract operation.
Lesson
2 years ago
ENG
JPN
When edges of a part are too close to allow for fillets to be created properly, often making use of separate solid bodies can help. Separate features into separate solid bodies. Apply fillets to the individual bodies. Use the Combine command to add the bodies back together. Apply an additional fillet to the part to complete the model.
Lesson
2 years ago
ENG
JPN
Learn to use modeling techniques that allow for efficient transition between part design and delivery of the finished castings. Create a motorcycle gear case by designing the production tooling for the part. Start by designing the core, or the negative space, of the gear case. Design the pattern, or outside faces, of the gear case as a separate solid body. Save the tooling bodies as new part files. Combine the solid bodies, subtracting the core from the pattern. Apply machining features to finish the model.
Lesson
2 years ago
ENG
JPN
Wrap a flat sketch around a cylindrical or conical surface. A wrap feature can be an embossing type, which adds material, a debossing type, which removes material, or a scribing type, which splits the faces. Locate the sketch plane for a wrap feature. Define the length of a sketch using an equation. Remove material using the deboss option of the wrap feature.
Lesson
2 years ago
ENG
JPN
Create 2D or 3D curves defined by mathematical equations. The curve can be explicit where y is a function of x, or parametric where x, y, and z are functions of t. Create a 3D spline using a parametric mathematical equation. Create a sweep feature using one 3D spline as the path and another as the guide curve.
Lesson
2 years ago
ENG
JPN
Create a curve through a series of X, Y, and Z points that you type into a dialog box or import from an ASCII text file. Create a curve by typing X, Y, and Z coordinates for the curve\'s through points. Import a set of X, Y, and Z points for a curve\'s through points. Convert a curve into sketch entities.
Lesson
2 years ago
ENG
JPN
Set the options of a sweep feature to control the orientation and twist of the profile along the path. Use curvature combs to evaluate the curvature of paths and guide curves. Control the twist of the profile along the path of a sweep.
Lesson
2 years ago
ENG
JPN
Learn about the sweep options that control the orientation and twist of the sweep profile along the sweep path. Set the orientation/twist options to control the sweep profile. Understand the difference between "follow path" and "keep normal constant." Use curvature combs to observe the twist in the sweep profile.
Lesson
2 years ago
ENG
JPN
Learn the best practices for creating sweep profile sketches. Add relationships between the profile sketch entities and the guide curves. Create sketch relations that ensure the correct shape of the profile along the entire path. Set up the path and guide curves before creating the profile sketch. Add pierce relations between the guide curves and the profile sketch. Create a sweep feature with guide curves. Use perpendicular and parallel relations to define the sweep profile.
Lesson
2 years ago
ENG
JPN
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
Lesson
2 years ago
ENG
JPN