A From-To List is an Excel spreadsheet that defines electrical connection data for each wire routed in a cable assembly and components, such as connectors, terminal blocks, and ring terminals, to which the wires connect. From-To Lists allow the import of connection and component data into a route subassembly. Create a component library using the Component Library Wizard. Create a cable wire library using the Cable Wire Library Wizard. Use a component library and a cable wire library to create a From-To List with the From-To List Wizard. Place connectors to start routing. Use the \"Guidelines\" routing mode to create geometry for a route. Use the \"Re-route spline\" routing mode to modify a route to pass through pre-defined clips.
Learn to create tube drawings with appropriate dimensioning, a bill of materials, and multiple orthographic views and projections. Create a tube drawing from an existing part. Add additional views and a bill of materials to the drawing. Create centerlines and driven dimensions on the additional views of the part.
Create flexible tubing routes between existing components in an assembly. Edit tubing routes to accomodate tubing clips and cylindrical envelopes. Use the Repair Route command and the Re-route Spline option to resolve any errors. Create flexible tube routes. Edit routes using tubing clips and envelopes.
Create piping drawings with orthographic views, bills of materials, detailed views, and annotations by using the piping drawing and standard drawing tools. Add annotations and dimensions to drawings. Create piping drawings. Add bill of materials to drawing.
Import a Piping and Instrumentation Diagram file, which describes the routes, lines, descriptions, and connections of a piping system in text format. Create equipment and routing from the imported file. Learn the basic format and content of a P & ID file. Insert equipment from an imported P & ID file. Create a guideline spline for a piping system, and a route that fits the spline.
Make changes to route geometry using 3D sketches. Edit routes by deleting, trimming, and adding sketch geometry. Delete existing fittings and add replacements fittings. Edit existing routes. Delete existing fittings. Add replacement fittings.
Use the Split Route tool to add junction points to existing routes. Create geometry at the J-point to orient an in-line fitting. Use the Split Route tool to add a junction point to an existing route. Create 3D geometry at a junction point. Use 3D geometry to orient an in-line fitting.
Manually create a 3D-sketched route using angled guides, lines, elbows, and the merge command for a case where Auto Route is ineffective. Use angled guides, lines, elbows, and the merge command to create a 3D sketch. Use a 3D sketch to manually create a route.
Create a pipe coupling using the Routing Component Wizard. Create a fitting with the Routing Component Wizard. Select and create C-points and R-points. Use design tables to configure fittings. Save created fittings to the Design Library.
Search for, manage and view exisiting reports created by SolidWorks Utilities. Export reports to a briefcase or delete reports. Search for, manage, and view SolidWorks Utilities reports. Export and delete reports.
Compare the features of two parts and classify the differences into two categories: unique features that exist in only one part and modified features that exist in both parts. Find differences between the features of similar parts. Classify the features as unique or modified.
Improve system and graphical performance of drawings. Use lightweight models, large assembly mode, detached drawings, and more to reduce the required system resources. Use lightweight models and large assembly mode to improve performance. Open drawings without the model files in memory using detached drawings. Fix assembly interference issues to correct display issues.
Create sheet formats and templates. Sheet formats specify the appearance of the drawing sheet, including sheet size, title block, and more. A drawing template is the starting point for all drawings, including drawing properties, pre-defined views, and more. Understand the difference between a sheet format and a drawing template. Create a custom drawing template. Customize and save a standard sheet format. Insert an OLE object, such as a logo, into the sheet format. Link annotations to custom properties of the drawing or the model referenced by the drawing.
Create basic, aligned, offset, and partial or half-section views, including scope and advanced properties. Add several types of section views to a drawing. Define section view properties. Modify section views.
Insert annotations into existing drawing views, including custom notes, geometric tolerances, and blocks. Create annotations and symbols. Create blocks from geometry and notes. Save a block to a file. Insert a block into a drawing.
Select components according to their position relative to assembly envelopes and hide, suppress, or delete the selected components. Utilize assembly envelopes as reference components that are ignored by bills of materials and mass property calculations. Convert components to assembly envelopes. Select components based on their position relative to an assembly envelope. Hide or show components selected using an assembly envelope.
Create smart components by selecting components and features in a defining assembly. Then, insert smart components into an assembly to add the components and create the features. Create smart components in a defining assembly. Insert smart components into an assembly to create components and features. Select reference faces for the features of a smart component.
Large Design Review mode offers faster performance and enhanced visual features while limiting access to details of constituent parts and subassemblies. Large Design Review mode is ideal for visual presentations, rough measurements, and section views. Open an assembly in Large Design Review mode. Review the available tools and features in Large Design Review mode. Explore the limitations of Large Design Review mode.
Use the Assembly Visualization tool to display, sort, and select components by property. Navigate the assembly visualization pane to sort or group components. Change the color of components to improve visualization in the graphics area. Add custom columns to the assembly visualization pane. Export the information in the assembly visualization pane.
Add each of the six mechanical mate types to control the degrees of freedom of components when designing mechanisms. Mate a cylinder, plane, or point to a series of tangent faces with a cam follower mate. Limit the rotational movement between two components with a hinge mate. Move one component linearly to move another component rotationally with a rack and pinion mate. Add a pitch relation between the rotation of one component and the translation of another with a screw mate. Rotate two components relative to one another with a gear mate or a universal joint mate.
The linear coupler mate links the translation of one component to the translation of another component. The translation occurs along an axis you define relative to the assembly origin or a reference component. Select the faces and reference components to define a linear coupler mate. Set the ratio of motion of one component relative to another.
Constrain a point or a vertex of a component to a path in an assembly. Then, control the pitch, yaw, and roll of the component as it moves along the path. Specify the entities for a path mate. Edit a path mate to control pitch, yaw, and roll of the component.
Center a component relative to two faces of a groove using a width mate. Add a width mate to center a component relative to two faces of another component. Understand the degrees of freedom that are constrained by a width mate.
