Select features or elements of a particular type so that they may be acted upon in one operation. Operations include appearance changes, suppression changes, and more. Bulk-select by feature type. Understand the options and search criteria of the Power Select tool.
Check for sharp edges, sliver faces, discontinuous geometry and more. This affords you the opportunity to fix these issues before finalizing a design. Check a model for insignificant geometry, sliver faces, sharp edges, and discontinuous geometry. Specify search criteria.
Specify, identify, and locate features based on selection criteria so you can modify all of the features, simplify the model by suppressing the features, and create a simplified configuration. Locate and identify features based on specified criteria. Modify selected features in one operation. Create a simplified configuration.
Compare the geometry of two parts to find face and volumetric differences. It is particularly useful for comparisons to imported geometry. Find differences in the geometry of similar parts. Find differences in the volumes of similar parts.
Use this tool to find the differences between two bill of materials (BOM) tables. Differences include changes in quantity, part number, etc.. Find differences between similar BOMs. Set options of the Compare BOM tool. Interpret the output of the Compare BOM tool to identify the differences between BOMs.
Create a side core with draft from sketches on molds with trapped molding areas. Use feature freeze bar to exclude features from being rebuilt. Create side cores on molds. Exclude features from being rebuilt.
Use the Tooling Split command to create interlock surfaces around the perimeter of the parting surfaces to create mold tooling. Save mold bodies and create assemblies of molds. Create assembly files for mold from part files. Create exploded assembly view of mold. Create interlocking surfaces on molds using the tooling split command.
Create parting surfaces using parting lines by separating mold cavity faces from mold core faces using the parting surfaces tool. Create parting surfaces at the parting line that are perpendicular to the direction of pull. Explore the options of a parting surface.
Use the Shut-off surfaces tool to close open molding areas in a part to cut the tooling block into two pieces. Identify open molding areas in the part. Utilize the Shut-off Surfaces tool to close open molding areas. Understand when shut-off surfaces are required.
Use the Undercut Analysis tool to display regions of a part which are undercut or trapped, and would not be able to be released from a mold in the primary direction of pull. Learn to identify undercut or trapped regions of a part. Display or hide different portions of a part, depending on whether or not they are undercut or trapped.
Determine if proper draft exists in a part to be molded. Without proper draft, the part may fail to successfully eject from the mold. Evaluate draft on a molded part. Examine the different classes of drafted faces.
Create and use hole tables and general tables to display different types of data, such as alternate part configurations, on a drawing. Create a hole table to display hole sizes and locations on a drawing. Use a general table to display any custom data. Resize and edit existing tables.
Create a note with text that is linked to existing dimensions and custom properties. Link a note to a dimension. Edit the title block of a drawing to add notes linked to a model's properties. Add drawing property information to populate a title block.
Create several types of derived drawing views and understand the unique characteristics of each view type. A derived drawing view is created by referencing an existing drawing view. Create a projected view by folding off an existing drawing view. Project a view normal to a selected edge to create an auxiliary view. Show a portion of a view at an enlarged scale using detail views. Create a drawing view relative to planes or planar faces in the model. Focus on a portion of a drawing view by cropping and hiding the unwanted entities. Shorten an existing drawing view using broken views.
A SpeedPak configuration improves performance of large assemblies by simplifying the assembly without losing its file references. Create SpeedPak configurations. Use SpeedPak configurations in higher level assemblies. Understand the benefits and limitations of using a SpeedPak configuration.
Use global variables and equations in assemblies to control dimensions of components or values of mates. Set dimension names. Define global variables. Add equations that link dimension values of one component to values in another component.
Constrain two similar entities (points, edges, faces, etc) to be symmetric about a plane or planar face. A symmetry mate does not force the components to be symmetric, just the entities you select. Understand the acceptable selections for a symmetry mate. Constrain two planar faces to be symmetric about a reference plane.
Use limit mates to restrict the movement of components within a specified range of linear or angular values. Add coincident and limit mates to restrict the degrees of freedom of a component. Set the starting, minimum, and maximum values for a limit mate.
Use multiple mate mode within the Mate command as a shortcut to create many mate relations to one common reference. Create multiple mates to a common reference using multiple mate mode. Toggle alignment of mates. Explore different techniques to edit mate features.
Apply color, material and texture appearances to components, part features, or faces in an assembly. Control how those appearances propagate through the model. Appearances applied at the assembly component level do not affect the individual part file. Apply an appearance to several componets in an assembly. Apply a material appearance and change how it is displayed. Understand the hierarchy of appearance application in an assembly.
Smart Mates can be used to automate mates while adding a component to an assembly as well as for mating existing components. Different mate relations can be created based on the geometry that is specified for the Smart Mate. Automate mates while adding a component to an assembly. Use Smart Mates to mate existing components. Use Smart Mates with circular edges to generate multiple mates simultaneously.
Create display states to control the visibility and display style of components. Display states can be linked to configurations of an assembly. Display states can control hide/show state, display mode, appearance, and transparency of components. Add display states to an assembly. Modify visual properties of components with display states. Explore component selection techniques. Use the display pane. Open an assembly to a specific configuration and display state. Link display states to configurations.
Use the Move Face and Delete Face tools to modify non-parametric, imported geometry. Increase the size of a model by moving faces of the body. Remove and patch filleted faces of a model by deleting the faces. Increase the diameter of a cylindrical boss by offsetting the cylindrical face.
By looking at the transitions between spiral surfaces and adjacent surfaces, you can understand the three types of continuity present in CAD systems. Identify C0 (contact), C1 (tangent), and C2 (curvature) continuity.
