Use sketch relations to fully define a sketch and capture design intent. Learn about automatic sketch relations and sketch relations that you add manually. Add relations between two lines to understand common sketch relations. Add relations between circles and arcs to observe additional sketch relations.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create rounded or beveled edges using fillets or chamfers, respectively. Understand general filleting rules to facilitate better modeling practices. Create and understand some of the options for constant radius fillets. Create and understand some of the options for chamfer features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Move a sketch profile along a path to create a swept feature. Use sketch relations to create a sketch path relative to other sketches in the part. Understand some of the basic options for swept features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Revolve sketch profiles about an axis to add or remove material. Create sketches, with the proper entities, relations, and dimensions that facilitate revolved features. Understand some of the options for revolved features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Extend sketch profiles to create extruded bosses to add material and extruded cuts to remove material. Use sketch relations and dimensions to define sketch profiles. Understand some of the options for extruded features. Add material with an extruded boss and remove material with an extruded cut.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create assemblies by adding and orienting existing parts in an assembly. Add mates to connect the components. Create a new assembly from a part. Introduce the assembly FeatureManager design tree. Insert components into the assembly. Move and rotate components. Add mates between components.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the Interference Detection tool to identify any overlap between parts in an assembly. Clearance between parts can also be detected using the Clearance Verification tool. Use the Interference Detection tool to identify interferences between assembly components. Explore the options available within the Interference Detection tool. Use the Clearance Verification tool to identify clearances between assembly components. Explore the options available with the Clearance Verification tool.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create reference planes in any orientation using existing reference and solid geometry. You use reference planes for sketching or as a reference for other features. Create reference planes in a variety of orientations from different reference selections. Create reference planes from one or more geometric references.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Contour selection options allow individual contours to be selected within a sketch. By making use of contour selection techniques, a single sketch can be used to produce multiple features. Use the Contour Select Tool to pre-select contours for a feature. Use the Selected Contours options for a feature to define areas of a sketch to use. Use a single sketch to generate multiple features. Understand the icons displayed when using selected contours and sharing sketches.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the sketch tools Convert Entities and Offset Entities to reference sketch entities and model geometry to create new sketch entities. If the original geometry changes, then the converted and offset entities also change. Create converted entities into a new sketch. Create offset entities. Create a slot using offset entities.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Mirror existing sketch entities with the Mirror Entities tool or by adding symmetric relations. Or, dynamically mirror sketch entities as you create them. Mirror sketch entities that you previously created. Dynamically mirror sketch entities as you create them. Add symmetric relations to sketch entities to mirror the entities.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the ConfigurationManager to add configurations to an assembly and show two versions of its components. Also, explore the advanced options of configuration properties. Use the ConfigurationManager to add configurations to an assembly. Use the advanced options of the configuration properties to control new components and mates. Create two versions of the assembly to represent different available components.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Global variables declare a named value that dimensions can be set equal to or that can be used in equations. Equations are mathematical expressions that can define dimension values as well as relate dimensions to each other. Create global variables. Use global variables to set fillet features to be equal radii. Use global variables in equations. Use equations to control dimension values.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Insert driving dimensions into a sketch using the versatile Smart Dimension tool. With a single tool, you can create radial dimensions for arc, linear dimensions between two points, and more. The dimension that appears depends on the entities you select. Insert linear, angular, radial, and other dimensions. Modify dimensions. Move and reattach dimensions.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Trim sketch entities to remove unwanted geometry. Trim sketch entities by their proximity and intersections with other sketch entities. Trim sketch entities using Power, Corner, Closest, and Inside and Outside options.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a drawing from an existing part file, insert basic views, and insert and manipulate dimensions and callouts. Make a basic drawing of a part. Insert standard views. Import dimensions from a model into a drawing. Make a change to a dimension. Demonstrate the associativity between the model and its drawings.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Explore the various methods for moving and rotating components, including dragging, using the triad, and setting the options in the PropertyManager. Explore the options for detecting collisions between components. Calculate the minimum clearance distance between components. Move and rotate a component by dragging, using the triad, or using the options in the PropertyManager. Identify the clearance between options when moving components. Detect collisions between moving components and other components.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use bill of materials (BOM) tables to call out the components of an assembly. Bill of materials can be modified in many ways and new table templates can be generated to save customizations. Tabulated bill of materials can list information about multiple configurations within the same table. Create a bill of materials for an assembly. Modify a bill of materials table to add and reorder column. Save a bill of materials as a template. Create a tabulated bill of materials.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create points, axes, and coordinate systems to aid in the creation of features and helps with the use of measurement tools. Explore the options to create reference points, axes, and coordinate systems based on one or more model entities.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Review the various end condition options for extruded features. Examine the end conditions defined by distance from the sketch: Blind, Through All, and Midplane. Examine the end conditions defined by existing 3D geometry: Up to Next, Up to Vertex, Up to Surface, Offset from Surface, and Up to Body. Identify geometry differences based on the selected end condition.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a sketch driven pattern, table driven pattern, curve driven pattern, and a fill pattern. These patterns allow you to pattern features in non-linear or non-circular directions. Use sketch points to define a sketch driven pattern. Specify coordinates for a table driven pattern. Convert entities to create a sketch for a curve driven pattern. Distribute features within a boundary using a fill pattern.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Diagnose and repair issues with sketches including extraneous geometry, dangling dimensions, and dangling relations. Diagnose problems in a part. Repair sketch geometry problems. Repair dangling relations and dimensions. Use the What\'s Wrong dialog. Edit the plane used by a sketch.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Interrogate a part using rollback to understand how it was created. Change the sequence of features and edit features, sketches, and sketch planes. Roll forward through an existing part. Reorder a feature in the FeatureManager design tree. Understand parent/child relationships. Edit sketches and features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS