Copy instances of one or more features or bodies by mirroring them across a reference plane or planar face. The resultant copy is reversed, as if seen in a mirror, maintaining symmetry. Create mirror patterns of features and bodies. Control results with geometry pattern option.
Lesson
7 months ago
ENG
JPN
Create a pattern of one or more features or bodies in one or two circular directions. The circular direction is based on a cylindrical or conical face, a circular or linear edge, centerline or axis. Spacing of instances can be controlled in different ways. Create circular patterns of existing features. Vary spacing and range.
Lesson
7 months ago
ENG
JPN
Create a pattern of one or more features or bodies in one or two linear directions. Unwanted instances can be left out of the pattern, and spacing and other dimensions may be varied. Create bi-directional linear patterns of existing features. Skip instances in a pattern. Vary parameters of pattern instances.
Lesson
7 months ago
ENG
JPN
The Hole Wizard feature creates standard-sized holes according to ANSI, ISO, and other international standards. Hole type, size, and placement location are input by the user. Create hole wizard holes. Learn the elements and options of a wizard hole. Create multiple holes in the same feature.
Lesson
7 months ago
ENG
JPN
Create reference planes in any orientation using existing reference and solid geometry. You use reference planes for sketching or as a reference for other features. Create reference planes in a variety of orientations from different reference selections. Create reference planes from one or more geometric references.
Lesson
7 months ago
ENG
JPN
Contour selection options allow individual contours to be selected within a sketch. By making use of contour selection techniques, a single sketch can be used to produce multiple features. Use the Contour Select Tool to pre-select contours for a feature. Use the Selected Contours options for a feature to define areas of a sketch to use. Use a single sketch to generate multiple features. Understand the icons displayed when using selected contours and sharing sketches.
Lesson
7 months ago
ENG
JPN
Use the sketch tools Convert Entities and Offset Entities to reference sketch entities and model geometry to create new sketch entities. If the original geometry changes, then the converted and offset entities also change. Create converted entities into a new sketch. Create offset entities. Create a slot using offset entities.
Lesson
7 months ago
ENG
JPN
Mirror existing sketch entities with the Mirror Entities tool or by adding symmetric relations. Or, dynamically mirror sketch entities as you create them. Mirror sketch entities that you previously created. Dynamically mirror sketch entities as you create them. Add symmetric relations to sketch entities to mirror the entities.
Lesson
7 months ago
ENG
JPN
Use design tables to quickly create many configurations that change the suppression states of components, mates, and assembly features. Also, you can use design tables to configure the dimensions of mates and assembly features. Understand the options when creating a design table. Use data validation to restrict values entered in the design table. Set configuration properties to control new mates and components. Change the configuration of components in the assembly design table.
Lesson
7 months ago
ENG
JPN
Use design tables to quickly create many configurations that change the values of dimensions and the suppression states of features. Set up a model to effectively use design tables. Understand the options when creating a design table. Add columns to a design table for additional dimensions and features to control. Add rows to a design table for additional configurations to create.
Lesson
7 months ago
ENG
JPN
Use the ConfigurationManager to add configurations to an assembly and show two versions of its components. Also, explore the advanced options of configuration properties. Use the ConfigurationManager to add configurations to an assembly. Use the advanced options of the configuration properties to control new components and mates. Create two versions of the assembly to represent different available components.
Lesson
7 months ago
ENG
JPN
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Lesson
7 months ago
ENG
JPN
Global variables declare a named value that dimensions can be set equal to or that can be used in equations. Equations are mathematical expressions that can define dimension values as well as relate dimensions to each other. Create global variables. Use global variables to set fillet features to be equal radii. Use global variables in equations. Use equations to control dimension values.
Lesson
7 months ago
ENG
JPN
Insert driving dimensions into a sketch using the versatile Smart Dimension tool. With a single tool, you can create radial dimensions for arc, linear dimensions between two points, and more. The dimension that appears depends on the entities you select. Insert linear, angular, radial, and other dimensions. Modify dimensions. Move and reattach dimensions.
Lesson
7 months ago
ENG
JPN
Trim sketch entities to remove unwanted geometry. Trim sketch entities by their proximity and intersections with other sketch entities. Trim sketch entities using Power, Corner, Closest, and Inside and Outside options.
Lesson
7 months ago
ENG
JPN
Create fillets and chamfers to modify geometry in a sketch. Set the size and options for the sketch fillets and sketch chamfers. Create fillets and chamfers in a sketch. Understand the options for creating sketch fillets and sketch chamfers.
Lesson
7 months ago
ENG
JPN
Create a drawing from an existing part file, insert basic views, and insert and manipulate dimensions and callouts. Make a basic drawing of a part. Insert standard views. Import dimensions from a model into a drawing. Make a change to a dimension. Demonstrate the associativity between the model and its drawings.
Lesson
7 months ago
ENG
JPN
Explore the various methods for moving and rotating components, including dragging, using the triad, and setting the options in the PropertyManager. Explore the options for detecting collisions between components. Calculate the minimum clearance distance between components. Move and rotate a component by dragging, using the triad, or using the options in the PropertyManager. Identify the clearance between options when moving components. Detect collisions between moving components and other components.
Lesson
7 months ago
ENG
JPN
Create a named BOM, derived from a computed BOM. Modify and add new items into a table. Check the new named BOM into a vault. Compare to an original computed BOM.
Lesson
7 months ago
ENG
Learn how SOLIDWORKS PDM displays BOM types in the Windows Explorer interface.
Lesson
7 months ago
ENG
Demonstrate how to copy all CAD and non-CAD files from one folder, into a new folder. Distinguish between the copied files and the original file. Demonstrate how to move one file into another file, while preserving their references.
Lesson
7 months ago
ENG
Demonstrate how to clear the local cache for individual files as well as entire folders in a vault.
Lesson
7 months ago
ENG
Demonstrate how to submit a document for approval. Sending through a workflow from the Under Change state to Change Pending Approval. Demonstrate how to send a notification to a specific approver with comments included. Log into the vault as an approver and demonstrate how to approve a document.
Lesson
7 months ago
ENG
Learn the search functions found in the tool, which are not available in the Windows Explorer Integrated search. Modifying search favorites Exporting search results into MS Excel Search for users within a vault
Lesson
7 months ago
ENG