Mirror existing sketch entities with the Mirror Entities tool or by adding symmetric relations. Or, dynamically mirror sketch entities as you create them. Mirror sketch entities that you previously created. Dynamically mirror sketch entities as you create them. Add symmetric relations to sketch entities to mirror the entities.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the ConfigurationManager to add configurations to an assembly and show two versions of its components. Also, explore the advanced options of configuration properties. Use the ConfigurationManager to add configurations to an assembly. Use the advanced options of the configuration properties to control new components and mates. Create two versions of the assembly to represent different available components.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Global variables declare a named value that dimensions can be set equal to or that can be used in equations. Equations are mathematical expressions that can define dimension values as well as relate dimensions to each other. Create global variables. Use global variables to set fillet features to be equal radii. Use global variables in equations. Use equations to control dimension values.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Explore the various methods for moving and rotating components, including dragging, using the triad, and setting the options in the PropertyManager. Explore the options for detecting collisions between components. Calculate the minimum clearance distance between components. Move and rotate a component by dragging, using the triad, or using the options in the PropertyManager. Identify the clearance between options when moving components. Detect collisions between moving components and other components.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use bill of materials (BOM) tables to call out the components of an assembly. Bill of materials can be modified in many ways and new table templates can be generated to save customizations. Tabulated bill of materials can list information about multiple configurations within the same table. Create a bill of materials for an assembly. Modify a bill of materials table to add and reorder column. Save a bill of materials as a template. Create a tabulated bill of materials.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create points, axes, and coordinate systems to aid in the creation of features and helps with the use of measurement tools. Explore the options to create reference points, axes, and coordinate systems based on one or more model entities.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Review the various end condition options for extruded features. Examine the end conditions defined by distance from the sketch: Blind, Through All, and Midplane. Examine the end conditions defined by existing 3D geometry: Up to Next, Up to Vertex, Up to Surface, Offset from Surface, and Up to Body. Identify geometry differences based on the selected end condition.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a sketch driven pattern, table driven pattern, curve driven pattern, and a fill pattern. These patterns allow you to pattern features in non-linear or non-circular directions. Use sketch points to define a sketch driven pattern. Specify coordinates for a table driven pattern. Convert entities to create a sketch for a curve driven pattern. Distribute features within a boundary using a fill pattern.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Diagnose and repair issues with sketches including extraneous geometry, dangling dimensions, and dangling relations. Diagnose problems in a part. Repair sketch geometry problems. Repair dangling relations and dimensions. Use the What\'s Wrong dialog. Edit the plane used by a sketch.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Interrogate a part using rollback to understand how it was created. Change the sequence of features and edit features, sketches, and sketch planes. Roll forward through an existing part. Reorder a feature in the FeatureManager design tree. Understand parent/child relationships. Edit sketches and features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Copy instances of one or more features or bodies by mirroring them across a reference plane or planar face. The resultant copy is reversed, as if seen in a mirror, maintaining symmetry. Create mirror patterns of features and bodies. Control results with geometry pattern option.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a pattern of one or more features or bodies in one or two circular directions. The circular direction is based on a cylindrical or conical face, a circular or linear edge, centerline or axis. Spacing of instances can be controlled in different ways. Create circular patterns of existing features. Vary spacing and range.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a pattern of one or more features or bodies in one or two linear directions. Unwanted instances can be left out of the pattern, and spacing and other dimensions may be varied. Create bi-directional linear patterns of existing features. Skip instances in a pattern. Vary parameters of pattern instances.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create fillets and chamfers to modify geometry in a sketch. Set the size and options for the sketch fillets and sketch chamfers. Create fillets and chamfers in a sketch. Understand the options for creating sketch fillets and sketch chamfers.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use design tables to quickly create many configurations that change the values of dimensions and the suppression states of features. Set up a model to effectively use design tables. Understand the options when creating a design table. Add columns to a design table for additional dimensions and features to control. Add rows to a design table for additional configurations to create.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a named BOM, derived from a computed BOM. Modify and add new items into a table. Check the new named BOM into a vault. Compare to an original computed BOM.
Lesson
10 months ago
ENG
Learn how SOLIDWORKS PDM displays BOM types in the Windows Explorer interface.
Lesson
10 months ago
ENG
Demonstrate how to copy all CAD and non-CAD files from one folder, into a new folder. Distinguish between the copied files and the original file. Demonstrate how to move one file into another file, while preserving their references.
Lesson
10 months ago
ENG
Demonstrate how to clear the local cache for individual files as well as entire folders in a vault.
Lesson
10 months ago
ENG
Learn the search functions found in the tool, which are not available in the Windows Explorer Integrated search. Modifying search favorites Exporting search results into MS Excel Search for users within a vault
Lesson
10 months ago
ENG
Demonstrate how to create a search favorite related to finding documents are checked out by a certain user. Demonstrate how to let other users see the favorite search. Use the search favorite when logged in as another user.
Lesson
10 months ago
ENG
Demonstrate the use of the SOLIDWORKS PDM Search tools. Discuss the three search tools: Quick Search, Embedded Search and the Search Tool. Quickly find files using Quick Search. Understand how to use the embedded search tool.
Lesson
10 months ago
ENG
Demonstrate the creation of a reference between a newly created MS Word file and an assembly. Remove the reference using the custom references functionality.
Lesson
10 months ago
ENG
Learn the file history tool. Access an early version of a part. Access the latest version of a part.
Lesson
10 months ago
ENG