This module introduces the Simulation user interface and walks through the setup process for a simple part. The simulation is then run and the results are analyzed. Learn the Simulation user interface. Apply fixtures, materials and loads. Run the simulation and analyze the model for stress and displacement.
Lesson
5 months ago
ENG
Use a boundary surface to fill in gaps between other surfaces. Understand some of the similarities between boundary surfaces, lofts, and filled surfaces. Delete some undesirable geometry from a surface model and fill the gap with a boundary surface.
Lesson
5 months ago
ENG
Use the Freeform feature to create organic features by adjusting the outward and inward shape of a face. Modify faces using control curves and control points to create curvilinear designs. Use the Freeform feature to create a shape with an organic feel. Create control curves and control points. Deform a face using control curves, control points, and the triad. Edit a sketch to make the freeform grid follow the shape of the face to be deformed.
Lesson
5 months ago
ENG
JPN
Use several direct editing techniques for working with imported geometry using surfacing tools. Explore the Delete Face tool, the Delete Hole command, and the Untrim Surface tool. Use the Delete Face tool to remove an unwanted imported geometry feature. Use Delete Hole and Untrim Surface to remove an unwanted imported geometry feature. Convert a surface body into a solid body using the Thicken command.
Lesson
5 months ago
ENG
JPN
Locate and diagnose problems in geometry imported from other CAD software. Then, use surface tools to repair the damaged geometry. Diagnose problems in a model with verification on rebuild, import diagnostics, and check entity. Heal faulty faces using the import diagnostics tool. Delete faulty faces and use various surface tools to re-create the geometry. Display curvature and check the minimum radius of curvature. Delete and replace fillets to create smoother blends. Extend, trim, and knit surfaces.
Lesson
5 months ago
ENG
JPN
Use extruded, revolved, and swept surfaces to create geometry. Trim, extend, knit, and thicken the surfaces to finish the thin-walled model. Extrude a sketch to create a surface. Revolve a sketch about an axis to create a surface. Trim a surface using a sketch or another surface as the trim tool. Sweep an open profile along a path to create a surface. Combine multiple surfaces into a single body using knit surfaces. Thicken a surface body to create a solid body.
Lesson
5 months ago
ENG
JPN
Use surface tools to create complex blends at the intersections of surfaces. The tools used in this module include trim surfaces, lofted surfaces, and fill surfaces. Trim surfaces using a sketch as the trim entity. Create a blend between surfaces using a lofted surface. Fill an area that is completely bounded by surfaces using the fill surface tool.
Lesson
5 months ago
ENG
JPN
Understand how to start routing and how the route subassembly organizes and stores the components of a route. Enable the Routing add-in. Locate the Piping, Tubing and Electrical menus. Understand a routing subassembly. Identify routing library components. Use the routing library manager to load settings.
Lesson
5 months ago
ENG
JPN
Create several types of derived drawing views and understand the unique characteristics of each view type. A derived drawing view is created by referencing an existing drawing view. Create a projected view by folding off an existing drawing view. Project a view normal to a selected edge to create an auxiliary view. Show a portion of a view at an enlarged scale using detail views. Create a drawing view relative to planes or planar faces in the model. Focus on a portion of a drawing view by cropping and hiding the unwanted entities. Shorten an existing drawing view using broken views.
Lesson
5 months ago
ENG
JPN
Discover FloXpress to perform a first pass fluid flow analysis on a model using computational fluid dynamics (CFD). Understand some of the assumptions when using FloXpress. Explore the interface of FloXpress. Walk through
Lesson
5 months ago
ENG
Insert annotations into existing drawing views, including custom notes, geometric tolerances, and blocks. Create annotations and symbols. Create blocks from geometry and notes. Save a block to a file. Insert a block into a drawing.
Lesson
5 months ago
ENG
JPN
Use bill of materials (BOM) tables to call out the components of an assembly. Bill of materials can be modified in many ways and new table templates can be generated to save customizations. Tabulated bill of materials can list information about multiple configurations within the same table. Create a bill of materials for an assembly. Modify a bill of materials table to add and reorder column. Save a bill of materials as a template. Create a tabulated bill of materials.
Lesson
5 months ago
ENG
JPN
Learn about the Certified SOLIDWORKS Professional Advanced Mold Tools exam. Understand some of the SOLIDWORKS skills you need to achieve certification. Review some of the questions from the sample exam.
Lesson
5 months ago
ENG
Learn about the Certified SOLIDWORKS Professional Advanced Mold Tools exam. Understand some of the SOLIDWORKS skills you need to achieve certification. Review some of the questions from the sample exam.
Lesson
5 months ago
ENG
Identify interfering components and adjust mates to repair the assembly for the Certified SOLIDWORKS Professional sample exam. Find the center of mass of an assembly relative to a coordinate system. Insert and mate a new component. Use the Interference Detection tool to identify interferences between components.
Lesson
5 months ago
ENG
Update the parameters that control the overall shape and size of the part for the Certified SOLIDWORKS Professional sample exam. Manual edit individual dimensions and globally change the values of variables. Rebuild the model to ensure that all features update correctly.
Lesson
5 months ago
ENG
Understand the prerequisites of the Certified SOLIDWORKS Professional exam. Learn what you can do to best prepare for the CSWP exam. Identify the areas of the SOLIDWORKS software that you should study.
Lesson
5 months ago
ENG
Learn about the segments that make up the Certified SOLIDWORKS Professional exam. Identify the three segments of the exam: Part Modeling, Configurations and Part Modifications, and Assembly Modeling. Understand that you can take each segment as many times as necessary, after a waiting period between attempts has elapsed.
Lesson
5 months ago
ENG
Explore the assembly modeling portion of the CSWA exam. Review the techniques used to insert components and add mates to build the assembly in the sample CSWA exam. Review the sample CSWA exam.
Lesson
5 months ago
ENG
Understand the Certified SOLIDWORKS Professional exam. Identify the benefits of becoming certified. Learn about some of the SOLIDWORKS skills you need to achieve certification.
Lesson
5 months ago
ENG
Explore the part modeling portion of the CSWA exam. Review the techniques used to model the part in the sample CSWA exam. Review the sample CSWA exam.
Lesson
5 months ago
ENG
Animations provide an extra visual representation of how an assembly can be put together, taken apart, and shows the order in which parts are added. Animations compliment exploded views incredibly well and help manufacturers and assemblers understand exactly how the components come together. Animations also serve as a great marketing tool, as they can show off the complexities of the design as well as how refined the final product is. In this lesson, an Animation will be created in SOLIDWORKS Composer by exploding additional components in this assembly.
Lesson
5 months ago
ENG
FRA
DEU
JPN
ESP
ITA
CHS
Being able to incorporate SOLIDWORKS Composer files into a Word document or a PDF gives more flexibility to share information with manufacturers and assemblers. Even if a user doesn’t have SOLIDWORKS Composer downloaded on their machine, incorporating an SMG file into a Word document or a PDF can be a way to communicate efficiently using Composer files. In this lesson, you will see how to link SOLIDWORKS Composer file into a Word Document and a PDF as well as show how different configurations can be loaded in the same document.
Lesson
5 months ago
ENG
FRA
DEU
JPN
ESP
ITA
CHS
Use both bottom-up and top-down assembly modeling design techniques to insert and modify components in an assembly. Insert components into an assembly using a bottom-up approach. Modify a component using a top-down approach. Create a new component using a top-down approach.
Lesson
5 months ago
ENG