교육 카탈로그
학습 종류:
액세스 수준:
Use Automatic Feature Regognition (AFR) to automatically extract the machinable features to be machined. Set options to define feature types to extract. Review the hole recognition and feature groups options. Review options to automatically generate operations and toolpaths. Extract machineable features and review the features in the CAM Feature Tree.
Lesson
2 년 전
ENG
Use the edit definition command to modify contouring (finish) operations. Review contour operation parameters. Review side parameters settings. Review feeds and speeds tab.
Lesson
2 년 전
ENG
Use the Edit Definition command to modify contouring operation leadin and leadout parameters. Modify leadin type. Modify leadin amount and overlap. Modify arc radius and arc angle.
Lesson
2 년 전
ENG
Use Interactive Feature Regognition (IFR) to manually create a machinable feature. Create a corner slot feature using the 2.5 axis feature command. Review geometry selection options to define the feature. Set the feature end condition. Modify the machining strategy for the feature.
Lesson
2 년 전
ENG
Use the Combine Operations and Link Operation commands to combine like operation types. Combine operations for all like rough and contour mill operations. Drag and drop a hole feature from one center drill operation to a like center drill operation. Link like contour mill operations between two different setups.
Lesson
2 년 전
ENG
Use the New Contain Area command on an operation to restrict toolpaths to a specific area. Copy the face mill operation containing the avoid areas and delete the avoid areas from the copy. Create contain areas on the copied face mill operation using the 2D sketches in the part. Generate a toolpath for the copied face mill operation. Examine the contain areas of the face mill operation.
Lesson
2 년 전
ENG
파트와 어셈블리를 업데이트하는 것은 흔한 일이지만 SOLIDWORKS Composer 파일에서는 커다란 설계 변경을 수행하는 것이 어렵습니다. 기본 SOLIDWORKS CAD 소프트웨어가 아니기 때문입니다. 하지만 SOLIDWORKS Composer 액터 및 어셈블리를 업데이트하는 것은 간단합니다. 부품을 선택한 후에 “업데이트”를 선택하기만 하면 됩니다. 따라서 SOLIDWORKS에서 모든 것을 외부에서 업데이트해야 하는 번거로움을 덜 수 있습니다. 이 레슨에서는 SOLIDWORKS Composer의 업데이트 기능을 보여 주기 위해 개별 액터는 물론 전체 어셈블리도 업데이트합니다.
Lesson
2 년 전
ENG
FRA
DEU
JPN
ESP
ITA
CHS
Get the models closer to the finished geometry by learning to modify, remove, combine, slice or replicate the 3D geometries. Use Boolean operations such as Union and Subtract. Reshape the edges of 3D geometries using Fillet Edges or Chamfer Edges with different options. Remove or split the material of 3D geometries using the Slice tool Replicate geometry in multiple instances throughout the design with Mirror 3D and Pattern 3D
Lesson
2 년 전
ENG
이 모듈은 3D로 모델을 정의하는 데 사용하는 DimXpert 도구를 소개합니다. DimXpertManager의 주석 구조를 다룹니다. 또한 자동 치수 구조 도구를 사용하여 모델에 빠르게 주석을 표시하는 방법을 살펴봅니다. DimXpertManager를 설명합니다. 자동 치수 구조 도구를 사용합니다. 다양한 주석 유형(데이텀, 기하 공차, 크기 치수 위치 치수, 패턴 피처 도구)을 사용하는 방법을 알아봅니다. 패턴 피처 도구를 사용하여 모음 패턴을 작성합니다.
Lesson
2 년 전
ENG
이 모듈에서는 고급 DimXpert 기법을 살펴봅니다. 여러 설정을 활용하여 제품 제조 공정 정보(PMI)를 활용하는 방법에 대해 알아봅니다. 교차 지오메트리를 이해합니다. 자동 치수 구조를 사용하여 극치수를 작성합니다. 구성된 PMI에 대한 여러 설정을 작성합니다. 구조 복사 도구를 사용하여 한 설정에서 다른 설정으로 PMI를 전달합니다. DimXpert 주석을 2D 도면으로 불러옵니다.
Lesson
2 년 전
ENG
이 모듈에서는 3D로 모델을 정의하는 데 사용하는 추가 제품 제조 공정 정보(PMI) 도구를 다룹니다. 참조 치수를 적용하고 피처 치수를 재사용합니다. 데이텀 타겟을 적용하고 사용자 정의합니다. 설계 라이브러리에서 기본 노트를 추가하고 3D 노트를 추가합니다. 재사용할 공차 스타일을 작성하고 저장합니다. 표면 거칠기와 용접구조물 기호를 추가합니다.
Lesson
2 년 전
ENG
이 모듈에서는 3D 뷰를 다룹니다. 파트: 평면 단면도를 작성합니다. 영역 단면도를 작성합니다. 어셈블리: 여러 표시 상태를 캡처합니다. 여러 설정을 캡처합니다.
Lesson
2 년 전
ENG
이 모듈에서는 3D PDF 및 eDrawings 파일을 게시하고 사용하는 방법을 다룹니다. 사용자 정의 속성과 텍스트 필드를 추가합니다. 파트를 3D PDF로 게시합니다. 어셈블리를 3D PDF 및 eDrawings로 게시합니다. 3D PDF로 게시하기 전에 DimXpert 주석의 크기를 조절합니다. 3D PDF 및 eDrawings를 검토합니다.
Lesson
2 년 전
ENG
이 모듈은 자동 치수 구조를 사용하는 방법을 설명합니다. 일반 파트와 선삭 파트를 정의합니다. 자동 치수 구조를 사용하여 가감 공차를 적용합니다. 자동 치수 구조를 사용하여 기하 공차를 적용합니다. 제품 제조 공정 정보(PMI)를 새 주석 보기에 재지정합니다.
Lesson
2 년 전
ENG
SOLIDWORKS를 설치하지 않은 다운스트림 생산 부문에도 명확히 3D 설계 의도를 전달할 수 있도록 더욱 향상된 고급 3D PDF 기능을 학습합니다. 무료 Adobe Reader를 사용하여 SOLIDWORKS 또는 STEP 파일을 3D PDF로 첨부합니다. 여러 시트를 삽입합니다. 여러 뷰포트를 삽입합니다. 여러 테이블을 삽입합니다. 실선 윤곽선과 일러스트레이션 모드를 표시합니다. 화면 평면 노트와 테이블을 표시합니다. 무료 Adobe Reader를 사용하여 파일을 3D PDF로 첨부합니다.
Lesson
2 년 전
ENG
Routing Library Manager를 활용하여 사용자 정의 배관 스팩 템플릿을 작성하고 사용합니다. 파이프 관의 크기와 일정을 지정합니다. 파이핑 및 튜빙 데이터베이스에서 파이프와 엘보를 선택합니다. 배관 스팩 템플릿과 함께 배관 부품을 삽입합니다.
Lesson
2 년 전
ENG
JPN
파이프의 지오메트리(중심선 또는 바깥쪽 곡면)를 기반으로 파이프 배관을 편집합니다. 파이프에 피복을 추가할 수도 있습니다. 기존 곡면을 기반으로 배관을 작성합니다. 파이프에 피복을 추가합니다. 파이프와 관련해 치수가 지정된 위치(중심선 또는 바깥쪽 곡면)를 변경합니다.
Lesson
2 년 전
ENG
JPN
SOLIDWORKS Simulation 제품군의 모든 모듈을 살펴봅니다. SOLIDWORKS Flow를 사용하여 열 전달 및 유체 유동을 해석합니다. Sustainability를 사용하여 설계가 환경에 미치는 영향을 최소화합니다. SOLIDWORKS Simulation을 사용하여 응력-변형 해석을 살펴봅니다. SOLIDWORKS Motion을 사용하여 강체 역학을 해석합니다. SOLIDWORKS Plastics를 사용하여 플라스틱 사출 파트의 채우기 패턴을 봅니다.
Lesson
2 년 전
ENG
Understand the components of SOLIDWORKS PDM Standard, the role of each component, and how the components interact with each other. These components include: Microsoft® SQL Server® Express. SOLIDWORKS PDM Database Server. SOLIDWORKS PDM Archive Server. The three SOLIDWORKS PDM Client types.
Lesson
2 년 전
ENG
Learn how to a create SOLIDWORKS PDM Standard vault and setup a local client view. Create and configure a SOLIDWORKS PDM Standard vault. Setup a local client view connection to the newly created vault.
Lesson
2 년 전
ENG
Understand how to validate a newly created PDM vault by performing standard PDM operations. Add and share files and folders via the Windows Explorer vault view. Version a SOLIDWORKS part file and transition through a workflow to release.
Lesson
2 년 전
ENG
Understand the steps to perform as complete backup of PDM. Use Microsoft® SQL Server® Management Studio to backup PDM vault databases. Use the SOLIDWORKS PDM Archive Server configuration tool to backup vault user credentials. Locate and backup the vaults file archives.
Lesson
2 년 전
ENG
Understand how to install and configure the components of SOLIDWORKS PDM Standard. Install and configure Microsoft® SQL Server® Express. Install Microsoft® SQL Server® Management Studio. Install the SOLIDWORKS PDM Database Server. Install the SOLIDWORKS PDM Archive Server. Install the SOLIDWORKS PDM CAD Editor client.
Lesson
2 년 전
ENG
This lesson contains exercises so you can improve your proficiency with Sketching before taking the Certified SOLIDWORKS Associate (CSWA) exam.
Lesson
2 년 전
ENG