Understand the steps to perform as complete backup of PDM. Use Microsoft® SQL Server® Management Studio to backup PDM vault databases. Use the SOLIDWORKS PDM Archive Server configuration tool to backup vault user credentials. Locate and backup the vaults file archives.
Use the edit definition command to modify contouring (finish) operations. Review contour operation parameters. Review side parameters settings. Review feeds and speeds tab.
Learn how to a create SOLIDWORKS PDM Standard vault and setup a local client view. Create and configure a SOLIDWORKS PDM Standard vault. Setup a local client view connection to the newly created vault.
텍스처 맵은 현실감 있는 표현을 추가할 수 있는 유용한 도구입니다. 이 단원에서는 텍스처 맵을 소개하고 이 맵을 정확히 제어하여 누구나 텍스처 전문가가 될 수 있는 방법을 보여줍니다. Visualize에서 사용 가능한 네 가지 텍스처 매핑 유형 즉, 색상, 알파, 반사, 범프를 능숙하게 다룰 수 있도록 합니다. 텍스처 맵을 추가하고 여러 텍스처 매핑 모드를 사용하여 이러한 맵을 조작하는 방법을 학습합니다. 인터페이스 내에 통합된 Visualize Cloud Library에서 무료로 제공하는 전문가 수준의 미리 작성된 텍스처 표현을 다운로드하여 Visualize 프로젝트에 추가합니다.
Prepare SOLIDWORKS geometry for Flow Simulation analysis. Create lids manually. Create lids using the Lid Creation tool. Check if the geometry is water tight for internal flow analysis. Detect leaks in improperly sealed geometry.
Use the Combine Operations and Link Operation commands to combine like operation types. Combine operations for all like rough and contour mill operations. Drag and drop a hole feature from one center drill operation to a like center drill operation. Link like contour mill operations between two different setups.
원본에 구속된 도면뷰의 여러 유형을 작성하고 각 뷰 유형의 고유 특성을 이해합니다. 원본에 구속된 도면뷰는 기존 도면뷰를 참조하여 작성됩니다. 기존 도면뷰를 "투영"하여 투상도를 작성합니다. 선택한 모서리에 수직으로 뷰를 투영하여 보조도를 작성합니다. 상세도를 사용하여 뷰의 일부를 확대된 배율로 표시합니다. 모델의 평면 또는 평면 면을 기반으로 도면뷰를 작성합니다. 원하지 않는 요소를 자르고 숨겨서 도면뷰의 일부에 초점을 맞춥니다. 파단도를 사용하여 기존 도면뷰 길이를 줄입니다.
Learn how to define cables, create reusable macros, indicate the continuity of wires across multiple drawings, and depict custom components as simple black boxes. Define the cables to be used within a project and assign cable cores to specific component pins. Create macros for reusing specific parts of circuits or entire drawings. Depict the continuation of wires and equipotentials across drawings. Create black boxes for showing custom components with logical connectivity.
요소 대칭 복사 도구를 사용하거나 대칭 구속조건을 추가하여 기존 스케치 요소를 대칭 복사합니다. 또는 스케치 요소를 작성하면서 동적으로 이러한 요소를 대칭 복사합니다. 이전에 작성한 스케치 요소를 대칭 복사합니다. 스케치 요소를 작성하면서 동적으로 이러한 요소를 대칭 복사합니다. 스케치 요소에 대칭 구속조건을 추가하여 이러한 요소를 대칭 복사합니다.
벨트/체인 어셈블리 피처는 아이들러, 풀리, 스프라켓을 함께 링크하여 여러 부품을 동시에 의도한 대로 회전할 수 있습니다. 선택적으로, 벨트 또는 체인 부품 파트를 작성할 수 있습니다. 벨트/체인 어셈블리 피처에 대한 풀리와 아이들러의 모서리를 선택합니다. 벨트/체인 어셈블리 피처의 속성을 설정합니다.
부분 단면도, 보조 위치도, 분해도 등 어셈블리 모델 작업과 관련한 도면뷰 명령을 사용합니다. 어셈블리 설정을 나타내는 도면뷰 속성을 사용합니다. 어셈블리의 내부 부품을 나타내는 부분 단면도를 작성합니다. 기존 또는 새로운 설정을 사용하여 보조 위치도를 만듭니다. 어셈블리 분해도를 작성합니다.