Training Catalog
Access Level:
This module introduces the concept of mesh convergence by seeing how the size of elements affects stresses, strains and displacements. Learn how changing the global element size affects the results. Discover how to apply mesh controls at specific locations. See how sharp corners can produce stress concentrations.
Lesson
3 months ago
ENG
Discover how to analyze a structure under repeated loading conditions using the Fatigue module. Apply S-N curves to materials for repetitive loading analysis. Apply correction factors for more realistic results. View damage plots to analyze material life.
Lesson
3 months ago
ENG
This series introduces the concept of contact as well as bolts and remote loads. Analyze contacts within assemblies. Simplify the model by eliminating parts which can be represented using connectors and remote loads.
Lesson
3 months ago
ENG
This module introduces the Simulation user interface and walks through the setup process for a simple part. The simulation is then run and the results are analyzed. Learn the Simulation user interface. Apply fixtures, materials and loads. Run the simulation and analyze the model for stress and displacement.
Lesson
3 months ago
ENG
Explore the differences between solid and surface bodies and learn why surface modeling can be a solution to challenging modeling tasks. Understand the difference between a surface and solid body in SOLIDWORKS. Learn why surface modeling should be used.
Lesson
3 months ago
ENG
JPN
Learn how to set up the CFD analysis in FloXpress. Understand the four pages for setting up an analysis: Check Geometry, Fluids, Flow Inlet, and Flow Outlet.
Lesson
3 months ago
ENG
Discover FloXpress to perform a first pass fluid flow analysis on a model using computational fluid dynamics (CFD). Understand some of the assumptions when using FloXpress. Explore the interface of FloXpress. Walk through
Lesson
3 months ago
ENG
Discover DFMXpress and see how to check the manufacturability of parts for certain manufacturing processes. Set up geometric rule parameters for each type of part. Identify features that may inhibit a part's ability to be manufactured. Review machined, sheet metal, and molded parts.
Lesson
3 months ago
ENG
Understand how export settings impact the quality of the 3D printed model. Learn about the different file types supported by todays 3D printers. Learn how to change file settings in SOLIDWORKS for better print results.
Lesson
3 months ago
ENG
Learn how to prepare a model before 3D printing. Understand how to orient the part for the best printing results. Understand the implication of infill, wall thickness, shrinkage, and more on part strength and material usage.
Lesson
3 months ago
ENG
In this module, you will learn how to configure the 3DEXPERIENCE platform on cloud to set a scalable environment and well-organized applications.
Learning Path
4 months ago
In this module, you will learn how to collaborate across disciplines with full flexibility and traceability to define and develop innovative products.
Learning Path
4 months ago
In this module, you will learn how to collaboratively innovate through flexible team-based project planning and execution.
Learning Path
4 months ago
Understand the difference between starting a sketch on a plane or planar face. Create the first 2D sketch profile on a reference plane. Create additional 2D sketch profiles on planar model faces of the part.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Extend sketch profiles to create extruded bosses to add material and extruded cuts to remove material. Use sketch relations and dimensions to define sketch profiles. Understand some of the options for extruded features. Add material with an extruded boss and remove material with an extruded cut.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create assemblies by adding and orienting existing parts in an assembly. Add mates to connect the components. Create a new assembly from a part. Introduce the assembly FeatureManager design tree. Insert components into the assembly. Move and rotate components. Add mates between components.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create reference planes in any orientation using existing reference and solid geometry. You use reference planes for sketching or as a reference for other features. Create reference planes in a variety of orientations from different reference selections. Create reference planes from one or more geometric references.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the sketch tools Convert Entities and Offset Entities to reference sketch entities and model geometry to create new sketch entities. If the original geometry changes, then the converted and offset entities also change. Create converted entities into a new sketch. Create offset entities. Create a slot using offset entities.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Insert driving dimensions into a sketch using the versatile Smart Dimension tool. With a single tool, you can create radial dimensions for arc, linear dimensions between two points, and more. The dimension that appears depends on the entities you select. Insert linear, angular, radial, and other dimensions. Modify dimensions. Move and reattach dimensions.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Trim sketch entities to remove unwanted geometry. Trim sketch entities by their proximity and intersections with other sketch entities. Trim sketch entities using Power, Corner, Closest, and Inside and Outside options.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a drawing from an existing part file, insert basic views, and insert and manipulate dimensions and callouts. Make a basic drawing of a part. Insert standard views. Import dimensions from a model into a drawing. Make a change to a dimension. Demonstrate the associativity between the model and its drawings.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
An introduction to the basics of SOLIDWORKS and the user interface. Explore the definition of SOLIDWORKS. Understand how Design Intent is used. Explore the SOLIDWORKS user interface. Access the SOLIDWORKS Options.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
The Hole Wizard feature creates standard-sized holes according to ANSI, ISO, and other international standards. Hole type, size, and placement location are input by the user. Create hole wizard holes. Learn the elements and options of a wizard hole. Create multiple holes in the same feature.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS