Walk through the process of starting an electrical route by dragging and dropping electrical routing components into an assembly. Take advantage of auto-routing to connect components. Construct a wire route using the "Start By Drag/Drop" command. Create a route between the endpoints of stub lines with the "Auto-Route" routing mode. Use the "Edit Wires" command to add electrical attributes to a route.
Create and modify splines using spline points, relations, control polygons, and spline handles. Splines can have multiple spline points or as few as two spline points. Sketch with splines. Edit the number of spline points. Modify the shape of splines with relations, control polygons, and spline handles.
Create and edit rigid conduit and wiring routes to connect two electrical receptacle boxes. Understand that the center line of conduit defines the electrical conduit route. Understand that electrical routing components require hybrid components containing CPoints. Use the Auto Route feature to generate route lines. Edit existing route to add desired components.
Create folded hems on sheet metal parts to strengthen parts and eliminate sharp edges. Use the hem tool to edit the size, type, direction, and length of hems. Add folded hems on sheet metal parts. Practice creating hems and editing the type and dimensions.
Use the Tooling Split command to create interlock surfaces around the perimeter of the parting surfaces to create mold tooling. Save mold bodies and create assemblies of molds. Create assembly files for mold from part files. Create exploded assembly view of mold. Create interlocking surfaces on molds using the tooling split command.
The Design Library contains a number of sample forming tools, including embosses, extruded flanges, lances, louvers, and ribs. Learn to use these standard tools, as well as to create your own simple custom tools, to meet design needs. Drag and drop standard forming tools from the Design Library to form a sheet metal part. Edit a standard forming tool, customizing it to meet individual design needs. Set the stopping face and faces to remove within a part to be used as a custom forming tool.
Create exploded views in multibody parts using some of the same tools that you use to create an exploded view in an assembly. Toggle between exploded and collapsed states. Edit the explode steps. Create more than one exploded view per configuration.
A SpeedPak configuration improves performance of large assemblies by simplifying the assembly without losing its file references. Create SpeedPak configurations. Use SpeedPak configurations in higher level assemblies. Understand the benefits and limitations of using a SpeedPak configuration.
Utilize sheet metal and weldment features in one part using a multibody part. Use fillet and weld beads on sheet metal parts. Create a sheet metal fixture on a weldments part. Use filllet beads and weld beads on a sheet metal part.
Model parts in the context of an assembly, using references to other components to complete the design. The design intent for new parts (sizes of features, placement of components in the assembly, etc.) comes from other components in the assembly. Build a virtual part in the context of an assembly by employing Top-Down assembly modeling techniques. Create features in the assembly context by referencing geometry in mating parts. Understand InPlace mates and external references. Identify external references in the FeatureManager design tree.
Use the Undercut Analysis tool to display regions of a part which are undercut or trapped, and would not be able to be released from a mold in the primary direction of pull. Learn to identify undercut or trapped regions of a part. Display or hide different portions of a part, depending on whether or not they are undercut or trapped.
Detail a weldments model using a cut list table and import weld information from the model into a drawing view. Add and modify a cut list table. Import weld information from a model into a drawing view.
Edit a pipe route relative to the pipe\'s geometry (either centerline or external surface). Coverings can also be added to pipes. Create a route relative to an existing surface. Add coverings to pipes. Change where dimensions are assigned relative to the pipe (centerline or external surface).
Apply options to constant radius fillets to modify adjacent features, faces, and edges. Use options to control geometry in a constant radius fillet. Keep or eliminate features contained within the fillet region. Set the overflow type to determine how fillets behave when they are larger than the available space. Smooth corners where two fillets edges meet.
Create a side core with draft from sketches on molds with trapped molding areas. Use feature freeze bar to exclude features from being rebuilt. Create side cores on molds. Exclude features from being rebuilt.
The Combine command makes use of separate solid bodies within a part. By using this tool, solid bodies volumes can be added together, subtracted, or produce a solid from the common volume between bodies. The Combine command makes use of separate solid bodies within a part. By using this tool, solid bodies volumes can be added together, subtracted, or produce a solid from the common volume between bodies. Use the Subtract option within the Combine tool to subtract one solid body from another. Use the Common option within the Combine tool to result in a solid produced from the intersection of solid bodies.
Check for sharp edges, sliver faces, discontinuous geometry and more. This affords you the opportunity to fix these issues before finalizing a design. Check a model for insignificant geometry, sliver faces, sharp edges, and discontinuous geometry. Specify search criteria.
Copy and derive a sketch to use the original sketch more than once. A copied sketch is not related to the original, whereas a derived sketch changes if the original sketch every changes. Create a derived sketch that retains the same shape as the original sketch. Copy a sketch. Modify the position and dimensions of a sketch. Create a loft through three profile sketches.
Learn to create tube drawings with appropriate dimensioning, a bill of materials, and multiple orthographic views and projections. Create a tube drawing from an existing part. Add additional views and a bill of materials to the drawing. Create centerlines and driven dimensions on the additional views of the part.
Use a familiar find and replace tool to search and change the text for various types of annotations on a drawing sheet. Find and replace text in drawing annotations.
Create fillet beads and weld beads in a part. Learn the advantages of and differences between both features. Understand when to use each kind of weld. Create fillet beads and weld beads. Understand the advantages and disadvantages of each feature as well as when to use them. Use intermittent and staggered welds.
Improve system and graphical performance of drawings. Use lightweight models, large assembly mode, detached drawings, and more to reduce the required system resources. Use lightweight models and large assembly mode to improve performance. Open drawings without the model files in memory using detached drawings. Fix assembly interference issues to correct display issues.
Create several types of derived drawing views and understand the unique characteristics of each view type. A derived drawing view is created by referencing an existing drawing view. Create a projected view by folding off an existing drawing view. Project a view normal to a selected edge to create an auxiliary view. Show a portion of a view at an enlarged scale using detail views. Create a drawing view relative to planes or planar faces in the model. Focus on a portion of a drawing view by cropping and hiding the unwanted entities. Shorten an existing drawing view using broken views.
Use selection tools to select one or more components in an assembly. Selection tools simplify the selection of components with similar properties or components in proximity to one another. Select components by dragging a box. Select components using a volume. Isolate components. Select components using conditions such as hidden, mated, or internal.
