Create 3D sketches using the default coordinate system of the model to orient the sketch entities. Add relations and dimensions to constrain the size of the sketch entities. Use the on-screen feedback when sketching. Use planes to orient 3D sketch entities. Change the sketch plane by pressing the Tab key or by using a plane or planar face. Display multiple viewports to modify 3D sketch entities.
Lesson
1 year ago
ENG
JPN
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Lesson
7 months ago
ENG
JPN
Copy and derive a sketch to use the original sketch more than once. A copied sketch is not related to the original, whereas a derived sketch changes if the original sketch every changes. Create a derived sketch that retains the same shape as the original sketch. Copy a sketch. Modify the position and dimensions of a sketch. Create a loft through three profile sketches.
Lesson
1 year ago
ENG
JPN
Create an intersect feature to represent the fluid inside a bottle. Then, use the mass properties tool to determine the volume of the feature you created. Create a configuration to represent the liquid in the bottle. Create a reference plane to represent the fill level of the bottle. Use an intersect feature to model the liquid inside a bottle. Use mass properties to determine the volume of a solid body.
Lesson
1 year ago
ENG
JPN
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
Lesson
7 months ago
ENG
JPN
When the internal cut features of a model are of most importance in a design, one approach is to create solid features that represent the negative space of a part. Once the negative space is complete, the Combine command can be used to subtract the volume from another solid body. Use solid geometry representing the interior space of a manifold to create the negative space of the part. Create a separate solid body surrounding the geometry as the main body of the manifold. Combine the solid bodies in the part using a subtract operation.
Lesson
6 months ago
ENG
JPN
Wrap a flat sketch around a cylindrical or conical surface. A wrap feature can be an embossing type, which adds material, a debossing type, which removes material, or a scribing type, which splits the faces. Locate the sketch plane for a wrap feature. Define the length of a sketch using an equation. Remove material using the deboss option of the wrap feature.
Lesson
1 year ago
ENG
JPN
Learn to use modeling techniques that allow for efficient transition between part design and delivery of the finished castings. Create a motorcycle gear case by designing the production tooling for the part. Start by designing the core, or the negative space, of the gear case. Design the pattern, or outside faces, of the gear case as a separate solid body. Save the tooling bodies as new part files. Combine the solid bodies, subtracting the core from the pattern. Apply machining features to finish the model.
Lesson
1 year ago
ENG
JPN
Create 2D or 3D sketches where faces of a model intersect the sketch plane or each other. You can use the sketches to determine draft angles, evaluate curvature, as a sweep path, and more. Create 2D sketch entities where selected faces intersect the sketch plane. Create 3D sketch entities where selected faces intersect each other.
Lesson
1 year ago
ENG
JPN
Create a curve through a series of X, Y, and Z points that you type into a dialog box or import from an ASCII text file. Create a curve by typing X, Y, and Z coordinates for the curve\'s through points. Import a set of X, Y, and Z points for a curve\'s through points. Convert a curve into sketch entities.
Lesson
1 year ago
ENG
JPN
Contour selection options allow individual contours to be selected within a sketch. By making use of contour selection techniques, a single sketch can be used to produce multiple features. Use the Contour Select Tool to pre-select contours for a feature. Use the Selected Contours options for a feature to define areas of a sketch to use. Use a single sketch to generate multiple features. Understand the icons displayed when using selected contours and sharing sketches.
Lesson
7 months ago
ENG
JPN
Create face fillets to modify and repair imported geometry. Define the size and shape of the fillet using selected faces and edges instead of a constant radius value. Use options such as Curvature continuous, Constant width, Tangent propagation, and Hold lines to define the face fillet. Modify imported geometry using a face fillet. Ensure curvature continuity with faces adjacent to the fillet. Set a constant chord length of a fillet. Define a stopping edge, or hold line, for a face fillet.
Lesson
1 year ago
ENG
JPN
Apply a setback fillet to vertices where three or more edges meet. Setback fillets can model cleaner looking blends at the vertices. Add setback values to vertices where three or more edges meet.
Lesson
1 year ago
ENG
JPN
Locate and diagnose problems in geometry imported from other CAD software. Then, use surface tools to repair the damaged geometry. Diagnose problems in a model with verification on rebuild, import diagnostics, and check entity. Heal faulty faces using the import diagnostics tool. Delete faulty faces and use various surface tools to re-create the geometry. Display curvature and check the minimum radius of curvature. Delete and replace fillets to create smoother blends. Extend, trim, and knit surfaces.
Lesson
7 months ago
ENG
JPN
Add draft to cast and molded parts. Understand the various types of draft features you can create. Perform Draft Analysis to determine which faces need draft added to them.
Lesson
7 months ago
ENG
Use surface tools to create complex blends at the intersections of surfaces. The tools used in this module include trim surfaces, lofted surfaces, and fill surfaces. Trim surfaces using a sketch as the trim entity. Create a blend between surfaces using a lofted surface. Fill an area that is completely bounded by surfaces using the fill surface tool.
Lesson
7 months ago
ENG
JPN
SustainabilityXpress estimates a models carbon footprint, energy consumed during its lifecycle, Air acidification, and water eutrophication. Information is analyzed such as the material used, maufcturing process, manufacturing region, use region, and end of life. Explore how different materials and manufacturing processes affect the environmental impact for a design Specify product use information to determine values for transportation and end of life. Understand the information displayed in the Environmental Impact charts. Learn how to set an environmental impact baseline to compare changes to. Generate a report of the Sustainability output.
Lesson
1 year ago
ENG
JPN
Utilize functions of the Costing Task Pane and CostingManager tab to analyze the cost of manufacturing a machined part. Use the Costing Task Pane to evaluate materials costs. Learn how to customize material options for material and stock size. Use the Costing Manager to evaluate manufacturing costs. Learn how to customize cost values for manufacturing. Understand the values displayed in the Estimated Cost Per Part. Learn how to apply a markup or discount. Generate a cost analysis report.
Lesson
1 year ago
ENG
JPN
Check for sharp edges, sliver faces, discontinuous geometry and more. This affords you the opportunity to fix these issues before finalizing a design. Check a model for insignificant geometry, sliver faces, sharp edges, and discontinuous geometry. Specify search criteria.
Lesson
1 year ago
ENG
JPN
Explore the differences between solid and surface bodies and learn why surface modeling can be a solution to challenging modeling tasks. Understand the difference between a surface and solid body in SOLIDWORKS. Learn why surface modeling should be used.
Lesson
1 year ago
ENG
JPN
Use extruded, revolved, and swept surfaces to create geometry. Trim, extend, knit, and thicken the surfaces to finish the thin-walled model. Extrude a sketch to create a surface. Revolve a sketch about an axis to create a surface. Trim a surface using a sketch or another surface as the trim tool. Sweep an open profile along a path to create a surface. Combine multiple surfaces into a single body using knit surfaces. Thicken a surface body to create a solid body.
Lesson
7 months ago
ENG
JPN
Create a side core with draft from sketches on molds with trapped molding areas. Use feature freeze bar to exclude features from being rebuilt. Create side cores on molds. Exclude features from being rebuilt.
Lesson
1 year ago
ENG
JPN
Create parting surfaces using parting lines by separating mold cavity faces from mold core faces using the parting surfaces tool. Create parting surfaces at the parting line that are perpendicular to the direction of pull. Explore the options of a parting surface.
Lesson
1 year ago
ENG
JPN
Determine if proper draft exists in a part to be molded. Without proper draft, the part may fail to successfully eject from the mold. Evaluate draft on a molded part. Examine the different classes of drafted faces.
Lesson
1 year ago
ENG
JPN